Jump to content

Size and Radiators - Phanteks Enthoo

Siq
By Siq
in Power Supplies
 Share
Posted

Hiya all,

After a new case because my Phanteks P400 drives my temps up when I have the front of the case on ( radiator is mounted to the front).
I was looking at the Phanteks Enthoo Pro M Tempered Glass Special Edition because of that front ventilation and nice look to it. Wanted to jump onto that tempered glass hype train before it dies out. 

 

I was curious to where I could mount a 240mm radiator though.I can't mount it on the top of my P400 due to my motherboard's heatsink thingo at the very top blocking it and not having enough room.  I also feel that it'll happen again on the Enthoo. Also, the front is cut off by the shroud so I am lead to believe that half the radiator would be ventilated and the other half not.

Any suggestions, opinion, people who have it, what do we think, any other case suggestions for my issues and all :)

Thanks guyyys and galls.

| i'm bad at games, but play them anyways |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Imo The s340 elite looks nice and performs well for the price

QUOTE ME TO SEE MY REPLY!:D

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
15 hours ago, Siq said:

Hiya all,

After a new case because my Phanteks P400 drives my temps up when I have the front of the case on ( radiator is mounted to the front).
I was looking at the Phanteks Enthoo Pro M Tempered Glass Special Edition because of that front ventilation and nice look to it. Wanted to jump onto that tempered glass hype train before it dies out. 

 

I was curious to where I could mount a 240mm radiator though.I can't mount it on the top of my P400 due to my motherboard's heatsink thingo at the very top blocking it and not having enough room.  I also feel that it'll happen again on the Enthoo. Also, the front is cut off by the shroud so I am lead to believe that half the radiator would be ventilated and the other half not.

Any suggestions, opinion, people who have it, what do we think, any other case suggestions for my issues and all :)

Thanks guyyys and galls.

The Enthoo Pro M can fit the 240 at the front OR the top. The top has a 360mm RAD bracket making installation of just about any AIO on the market super simple. 

 

Examples:

https://pcpartpicker.com/b/CLw6Mp

https://pcpartpicker.com/b/QYLJ7P

https://pcpartpicker.com/b/9xcYcf

 

(top mount)

https://pcpartpicker.com/b/TXfH99 

https://pcpartpicker.com/b/3PfH99

https://pcpartpicker.com/b/myWD4D

 

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted
  • Author
On 15/12/2017 at 12:36 AM, TVwazhere said:

The Enthoo Pro M can fit the 240 at the front OR the top. The top has a 360mm RAD bracket making installation of just about any AIO on the market super simple. 

 

Examples:

https://pcpartpicker.com/b/CLw6Mp

https://pcpartpicker.com/b/QYLJ7P

https://pcpartpicker.com/b/9xcYcf

 

(top mount)

https://pcpartpicker.com/b/TXfH99 

https://pcpartpicker.com/b/3PfH99

https://pcpartpicker.com/b/myWD4D

 

Hey hey, sorry for such a late reply, Christmas and all is around and family have been bombarding me haha. Does your motherboard shown in those pictures linked have a heat sink at the top? 
Mine does and thats the main issue for me in terms of mounting at the top.

Is a 240mm rad completely ventilated at the front of the Enthoo as well? I mentioned the PSU shroud looks like it covers a part of that area.

| i'm bad at games, but play them anyways |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 12/24/2017 at 8:49 PM, Siq said:

 Does your motherboard shown in those pictures linked have a heat sink at the top? Mine does and thats the main issue for me in terms of mounting at the top.

Its definitively got the clearance. The last heat sink for the top mounted rads uses an ASUS TUF board which has a very tall heatsink on it, so it should fit no problem

On 12/24/2017 at 8:49 PM, Siq said:

Is a 240mm rad completely ventilated at the front of the Enthoo as well?

Yes, the PSU shroud has a plate you can remove to position the RAD perfectly in line with the front mesh. 

 

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×