99% completed build!

[Slaxc]

4 minutes ago, Lurick said:

You've got it all backwards  

Based on that picture, upper left two pins should be Power LED + then -, next to that is the power switch, then there will be a big space, and 4 pins on the right top, those are for the speaker.

 

Hard to see but speaker is on the top

[minibois]

2 minutes ago, Slaxc said:

It’s a Gigabyte X370 Gaming 5. Are you telling me that any 4 pin will work? There is another four pin I see right now that says sys fan pump

It's usually not wise to use the 4 pin meant for the pump. You have another two system fan connectors on the bottom of the board and one in the top left. Can you reach one of those?

As for the front panel connectors:

The bottom left is fine, above that sohuld be the power LED, to the right of that (horizontal) should be the power switch and below that reset.

 

 

[Lurick]

2 minutes ago, Slaxc said:

Hard to see but speaker is on the top

-snip-

Yah, based on that it should go

PLED+,PLED-,PWSW+,PWSW-, empty space, Speaker

HD+,HD-,RST-,RST+

 

(Power and reset don't matter for + and -, I know you don't have reset but just for informational purposes  )

If I remember right, the wire with the triangle is the positive?

[Slaxc]

4 minutes ago, Lurick said:

Yah, based on that it should go

PLED+,PLED-,PWSW+,PWSW-, empty space, Speaker

HD+,HD-,RST-,RST+

 

(Power and reset don't matter for + and -, I know you don't have reset but just for informational purposes  )

If I remember right, the wire with the triangle is the positive?

Wait so PLED+ goes top left?

[Lurick]

1 minute ago, Slaxc said:

Wait so PLED+ goes top left?

Yup, just like this

 

the bottom right one in the picture is for something else

[Slaxc]

7 minutes ago, Minibois said:

It's usually not wise to use the 4 pin meant for the pump. You have another two system fan connectors on the bottom of the board and one in the top left. Can you reach one of those?

As for the front panel connectors:

The bottom left is fine, above that sohuld be the power LED, to the right of that (horizontal) should be the power switch and below that reset.

 

 

Got both fans in, working on front panel now

[Slaxc]

4 minutes ago, Lurick said:

Yup, just like this

 

the bottom right one in the picture is for something else

Also, all I have is HDD LED and the PLED ones... should I have more?

[Lurick]

1 minute ago, Slaxc said:

Also, all I have is HDD LED and the PLED ones... should I have more?

Nope, that's fine. Just so long as you have a Power Switch one as well  

 

The CI is for chassis intrusion, speaker is for an external speaker for boot codes, and the bottom right is for a 3-pin LED which you don't have (never seen a case that does have one of those)

[Slaxc]

2 minutes ago, Lurick said:

Nope, that's fine. Just so long as you have a Power Switch one as well  

 

The CI is for chassis intrusion, speaker is for an external speaker for boot codes, and the bottom right is for a 3-pin LED which you don't have (never seen a case that does have one of those)

Power switch? Don’t have one... lemme fish around hold on

[Lurick]

1 minute ago, Slaxc said:

Power switch? Don’t have one... lemme fish around hold on

You had it in an earlier picture, it's labeled Power SW  

[Slaxc]

Just now, Lurick said:

You had it in an earlier picture, it's labeled Power SW  

It’s working  besides the Power SW hold on

[Slaxc]

2 minutes ago, Lurick said:

You had it in an earlier picture, it's labeled Power SW  

I already have SW in, power button still doesn’t do anything 

[Lurick]

Just now, Slaxc said:

I already have SW in, power button still doesn’t do anything 

Hmmm, does the LED light up to show that there is power?

[Slaxc]

Just now, Lurick said:

Hmmm, does the LED light up to show that there is power?

Well it works to turn it off now, I still have to push this power on button on my mobo to turn it on 

[Lurick]

1 minute ago, Slaxc said:

Well it works to turn it off now, I still have to push this power on button on my mobo to turn it on 

I think I know the issue.

I think (I can barely make it out) you have the Power LED split and one on each side of the Power SW, is that correct?

If so, you need to shift the entire PowerSW to the right one and put the two PowerLED pins directly next to each other.

[Slaxc]

3 minutes ago, Lurick said:

Hmmm, does the LED light up to show that there is power?

Works to turn on and off now, still no LED indication tho

[Slaxc]

Just now, Lurick said:

I think I know the issue.

I think (I can barely make it out) you have the Power LED split and one on each side of the Power SW, is that correct?

If so, you need to shift the entire PowerSW to the right one and put the two PowerLED pins directly next to each other.

Yeah I realized that, fixed it. Still no LEDS however

[Lurick]

1 minute ago, Slaxc said:

Yeah I realized that, fixed it. Still no LEDS however

Hmmm, the LEDs are the ones where orientation matters. On one side of the plastic you'll see a little triangle, that's the positive side, that side should be on the left.

[Slaxc]

1 minute ago, Lurick said:

Hmmm, the LEDs are the only ones where orientation matters. On one side of the plastic you'll see a little triangle, that's the positive side, that side should be on the left.

Had to switch em.. AHHH IT WORKS... been working on this thing since 9 in the morning, it’s 5:30 now lol

[Slaxc]

1 minute ago, Lurick said:

Hmmm, the LEDs are the only ones where orientation matters. On one side of the plastic you'll see a little triangle, that's the positive side, that side should be on the left.

It says HE, what does this mean?

[Lurick]

Just now, Slaxc said:

Had to switch em.. AHHH IT WORKS... been working on this thing since 9 in the morning, it’s 5:30 now lol

WOO!!!!

It's fully alive!!!!

[Slaxc]

Just now, Lurick said:

WOO!!!!

It's fully alive!!!!

Thanks a ton man... seriously. Had a lot of trouble today and I’m glad I figured it out. First ever PC build coming from someone who played console. I can’t wait to see how a R7 1700 and Gtx 1080 pair up with a 1440p G-Sync monitor. I can’t thank you enough, seriously.

[Slaxc]

1 minute ago, Lurick said:

WOO!!!!

It's fully alive!!!!

Now I just have to manage some cables and finally boot it up on my monitor

[Lurick]

1 minute ago, Slaxc said:

It says HE, what does this mean?

-snip-

The AE means it cannot find a boot device, which is normal since you most likely didn't install Windows yet

[Slaxc]

@Minibois thanks a ton to you too, means a lot. Glad it’s working now  great experience