Posted July 12, 2017 Hello, When i am trying to overclock my Ryzen 1700 the clock speed shows in HWMonitor and CPU-Z as 1549MHz. But in the bios and on Task manager it shows the 'correct and higher' clock speed. Doesnt matter what i set the clock speeds to, as soon as it is not auto it doesnt display correct value. When i first start the system and load HWMonitor it will show the full clock speed and then instantly go down to 1549MHz. I am using the Ryzen R7 1700, MSI X370 Gaming Plus motherboard and 16GB corsair LPX Ram. Why is this happening? (added screenshot of problem) Thanks. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2017 Try putting a load on it and see if it goes up to the correct frequency. You can see that the max frequency it has been at was 3.5, so it's probably in a down clocked power saving state at the picture. Try restarting HW monitor while under load if it doesn't change Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2017 Author Just opened up HW monitor and CPU-Z whilest running Cinebench. HWMonitor now says the full clock speed but CPU-Z doesnt. The Cinebench score i got was 572 cb? does that seem low? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2017 3 minutes ago, kieran_Austin said: Just opened up HW monitor and CPU-Z whilest running Cinebench. HWMonitor now says the full clock speed but CPU-Z doesnt. The Cinebench score i got was 572 cb? does that seem low? It is low. My i5 4460 is a quad core CPU at 3.2Ghz without hyper threading and it scores about 430cb. CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1 Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync Desktop benching: Cinebench R15 Single thread:168 Multi-thread: 833 SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2017 Mine is reported the clock speeds fine? Try a reinstall of the CPU-Z again. CPU: AMD Ryzen 5 5600X | CPU Cooler: Stock AMD Cooler | Motherboard: Asus ROG STRIX B550-F GAMING (WI-FI) | RAM: Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 CL16 | GPU: Nvidia GTX 1060 6GB Zotac Mini | Case: K280 Case | PSU: Cooler Master B600 Power supply | SSD: 1TB | HDDs: 1x 250GB & 1x 1TB WD Blue | Monitors: 24" Acer S240HLBID + 24" Samsung | OS: Win 10 Pro Audio: Behringer Q802USB Xenyx 8 Input Mixer | U-PHORIA UMC204HD | Behringer XM8500 Dynamic Cardioid Vocal Microphone | Sound Blaster Audigy Fx PCI-E card. Home Lab: Lenovo ThinkCenter M82 ESXi 6.7 | Lenovo M93 Tiny Exchange 2019 | TP-LINK TL-SG1024D 24-Port Gigabit | Cisco ASA 5506 firewall | Cisco Catalyst 3750 Gigabit Switch | Cisco 2960C-LL | HP MicroServer G8 NAS | Custom built SCCM Server. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2017 8 minutes ago, kieran_Austin said: Just opened up HW monitor and CPU-Z whilest running Cinebench. HWMonitor now says the full clock speed but CPU-Z doesnt. The Cinebench score i got was 572 cb? does that seem low? 572 is about 3x less than what it should be. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2017 Author As soon as i restore factory defualts in the BIOS the cpu is running at 3200MHZ and i get a Cinebench score of 1384! So why when i overclock does it go down? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now