Jump to content

I "might" have screwed up

Go to solution Solved by Electronics Wizardy,
3 minutes ago, Shadow-R said:

Terve!
The thing is that the Server was running while I unlugged everything.

Here's a picture of the screen though.

At first I thought that the RAID was resyncing, but I doubt that this would take more then 48 hours.

Sayonara!

pull the plug. It doesn't seem to be doing anything

 

Terve!
About two days ago I was digging through some stuff I had lying around and found some LED strip. Because I was curious if it would work I pulled out a power plug on my server and checked if it was working.

As things were lighting up in front of me I realized that I had pulled out the power plug for the HDDs. I am not sure if I got only one or if I disconnected 2 of them.

After that I tried to reboot the server (network connection was lost) and since then it is hangin.

What should I try next? I am not breave enough to pull the power plug (of the entire machine) just like that .

 

Hardware (that I think is relevant for this):

Mainboard: ASUS P9D-X

RAM: 16 GB Kingston ECC RAM

CPU: Intel Xeon E1225 V3

Storage: 3x 3TB WD red HDD

Running on FreeNAS, HDDs are in a ZFS Raid Z (similar to a RAID 5).

 

Thank you for any help.

Sayonara!

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Shadow-R said:

Terve!
About two days ago I was digging through some stuff I had lying around and found some LED strip. Because I was curious if it would work I pulled out a power plug on my server and checked if it was working.

As things were lighting up in front of me I realized that I had pulled out the power plug for the HDDs. I am not sure if I got only one or if I disconnected 2 of them.

After that I tried to reboot the server (network connection was lost) and since then it is hangin.

What should I try next? I am not breave enough to pull the power plug (of the entire machine) just like that .

 

Hardware (that I think is relevant for this):

Mainboard: ASUS P9D-X

RAM: 16 GB Kingston ECC RAM

CPU: Intel Xeon E1225 V3

Storage: 3x 3TB WD red HDD

Running on FreeNAS, HDDs are in a ZFS Raid Z (similar to a RAID 5).

 

Thank you for any help.

Sayonara!

whats on the screen?

 

This should affect booting at all.

Link to comment
Share on other sites

Link to post
Share on other sites

Terve!
The thing is that the Server was running while I unlugged everything.

Here's a picture of the screen though.

At first I thought that the RAID was resyncing, but I doubt that this would take more then 48 hours.

Sayonara!

20170118_195642.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Shadow-R said:

Terve!
The thing is that the Server was running while I unlugged everything.

Here's a picture of the screen though.

At first I thought that the RAID was resyncing, but I doubt that this would take more then 48 hours.

Sayonara!

pull the plug. It doesn't seem to be doing anything

 

Link to comment
Share on other sites

Link to post
Share on other sites

Terve!
It rebooted and aparently there was nothing lost. My main worry was the ZFS data pool...

Seems I was worrying too much.

Thank you a lot for the help.

Sayonara!
 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×