Need help painting my headphones

[KaminKevCrew]

7 hours ago, CardinalHunter said:

uhh come again

I mean, that ring should unscrew... In that case, just unscrew it, paint it, and then screw it back in.

[W-L]

11 hours ago, CardinalHunter said:

uhh come again

The easiest would just be to mask off the entire ring around the outside but if you wanted to paint the exterior portion of the ring you would do it from the inside to not get paint inside.

[CardinalHunter]

9 hours ago, KaminKevCrew said:

I mean, that ring should unscrew... In that case, just unscrew it, paint it, and then screw it back in.

have u seen the pictute the ring is fixed on that point

[KaminKevCrew]

5 minutes ago, CardinalHunter said:

have u seen the pictute the ring is fixed on that point

Not what it looks like to me, based on the photo you posted. 

[CardinalHunter]

2 minutes ago, KaminKevCrew said:

Not what it looks like to me, based on the photo you posted. 

well if there even was a screw I wouldn't even know how to take it apart

[CardinalHunter]

5 hours ago, W-L said:

The easiest would just be to mask off the entire ring around the outside but if you wanted to paint the exterior portion of the ring you would do it from the inside to not get paint inside.

soz but i still don't get u could u possibly elaborate further 

[W-L]

1 hour ago, CardinalHunter said:

soz but i still don't get u could u possibly elaborate further 

Just mask off the connector so no paint gets inside basically, be creative as long as nothing gets in there and affects the electrical connection your good. 

[KaminKevCrew]

1 hour ago, CardinalHunter said:

soz but i still don't get u could u possibly elaborate further 

If you don't get what he's trying to tell you, I'm doubting that you should actually be painting them.

[CardinalHunter]

7 hours ago, W-L said:

Just mask off the connector so no paint gets inside basically, be creative as long as nothing gets in there and affects the electrical connection your good. 

I think I get it now so I can just put a layer of masking tape above the connector can cut the shape of the ring out? I don't know how to properly mask the things off the make sure no paint gets into the connector

[W-L]

10 hours ago, KaminKevCrew said:

If you don't get what he's trying to tell you, I'm doubting that you should actually be painting them.

A second long as you stick it down so the edges are firmly in place over top of the edge you shouldn't have an issue with paint seeping down into the connector. 

[CardinalHunter]

uhh why do i feel like i got a used one i just found a strand of hair in the driver, I mean can plastic when i'ts not even sharp and I haven't really got to use it it's been sitting in the box like wtf