Visio, Network and Requirements [Help]

[derpylt]

Hello Linus folks!

I got a task to do and it has to be done in a few days, could anyone help me here?

Since IT class got more students, we need to move from smaller class to a bigger one. The bigger new class is almost empty and what we need to do is to write "requirement specifications". Since we have a Visio drawing of the second floor (bigger class),

I need to draw on how we could set up a network there. Router, switch, all cables, computers etc.

I have already drawn where the tables are going to be and computers, projector and the panel. 

We are going to have 17-19 students after summer. 

 

Now my question is:

Can someone with network and Visio experience help me to do some of it, I would be finished faster and I would appreciate that a lot. 

 

I will list the Visio file down below. 

derpylt, 

 

classroom.vsdx

[mcraftax]

Basically what you want to have setup. This is logical, not physical.

[mcraftax]

22 minutes ago, derpylt said:

- snip -

Sorry, don't visio so I can't do the rest.

[derpylt]

Ok thanks! I will save this. 

 

But people who are going to set up the network want to see the it from "room" perspective.

I don't know if it's possible to make hole in wall, I think it's brick wall. But you know what I mean.  

[derpylt]

4 minutes ago, mcraftax said:

Sorry, don't visio so I can't do the rest.

Let me mediafire it:

https://www.mediafire.com/?dns8yu8ndpkh408

[mcraftax]

1 minute ago, derpylt said:

Let me mediafire it:

https://www.mediafire.com/?dns8yu8ndpkh408

sorry, typo. don't have visio so can't do the rest.

[derpylt]

3 minutes ago, mcraftax said:

sorry, typo. don't have visio so can't do the rest.

Ok sorry.

But this is how it looks inside Visio. 

I've tried on connecting router to server, but it all goes wrong because it's brick wall, so the cables need to go somewhere else.