Jump to content

Is It Safe?

Have you tried Deoxit or WD40 Specialist Electrical Contact Cleaner to clean a dusty PC? I saw another YouTuber use Brake Cleaner to clean a dusty PC....

I went a little long between cleanings and a can of Air Duster and the old Air Compressor isn't able to do the job. I wasn't sure where to post this but since I would be applying chemicals on the MOBO PCB, GPU, PSU, cooling fans, and other electrical components doesn't sound safe. I trust isopropyl alcohol to an extent.

Link to comment
Share on other sites

Link to post
Share on other sites

using that would be the same as a can of duster, its not like it will blow out harder to blow away more dust, just get a can of air duster and get up on your board to blow that dust away. i never used it but if it doesn't specifically say its made to be used on computers dont risk it. and no you dont want any liquids to touch any part of your pc xD 

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, idupes said:

Have you tried Deoxit or WD40 Specialist Electrical Contact Cleaner to clean a dusty PC? I saw another YouTuber use Brake Cleaner to clean a dusty PC....

I went a little long between cleanings and Can of Air Duster and the old Air Compressor isn't able to do the job. I wasn't sure were to post this but since I would be applying chemicals on the MOBO PCB, GPU, PSU, cooling fans, and other electrical components doesn't sound safe. I trust isopropyl alcohol to an extent.

Try getting a vacuum cleaner and putting it in reverse. I do that and it works like a charm!

Or get an air compressor.

 

Hope this helps :P

CPU: Ryzen 5 5600x 4.9Ghz PBO    SSDs: 250GB 850 Pro           STEAM: KezzaMcFezza
GPU: GTX 1070 Strix                                     250GB 970 Pro           MOBO: MSI MPG B550 Gaming Plus

HDD: 1TB WD Black Drive                             500GB 860 Evo          MOUSE: Logitech G502

                                                                                                                                                                                               

                       

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

no dont use any chemicals or fluids

use compressed air

it will be enough

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, GreezyJeezy said:

using that would be the same as a can of duster, its not like it will blow out harder to blow away more dust, just get a can of air duster and get up on your board to blow that dust away. i never used it but if it doesn't specifically say its made to be used on computers dont risk it. and no you dont want any liquids to touch any part of your pc xD 

It's quick drying liquid and it looks like it works miracles for removing dust buildup on PSB. It could be the way we all clean our computers down the road if more tech people trust, use and recommend it. It seems safer than using an air compressor and busting off capacitors. Thanks for the response.

 

18 minutes ago, ProKeero said:

Try getting a vacuum cleaner and putting it in reverse. I do that and it works like a charm!

Or get an air compressor.

 

Hope this helps :P

I would think a Shop vac would still produce a static discharge. Thanks for the response.

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Enderman said:

no dont use any chemicals or fluids

use compressed air

it will be enough

I normally do and I also use a small brush for the stubborn spots. Thanks for the response.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, idupes said:

I normally do and I also use a small brush for the stubborn spots. Thanks for the response.

if compressed air isnt working for you then you probably need more air pressure

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Enderman said:

if compressed air isnt working for you then you probably need more air pressure

I wouldn't think that isopropyl alcohol would be unsafe, corrosive or conductive. I've used it to clean thermal paste for years. I know they make special chems and wipes to remove old paste while others say just wipe it off with a coffee filter. Everyone has their own methods.

Link to comment
Share on other sites

Link to post
Share on other sites

35 minutes ago, idupes said:

Have you tried Deoxit or WD40 Specialist Electrical Contact Cleaner to clean a dusty PC? I saw another YouTuber use Brake Cleaner to clean a dusty PC....

well i would only use ACTUALL WATER/E WIPES IF ITS dusty like hell.

 

YES YOU CAN WASH WITH SOAP RAM, GPU's ans Cpus as LONG as you DRY THEM!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×