Jump to content

I burned my pc while overclocking but not really.

I just have to share this story.

 

So I've been clocking my g3258 and I cranked the voltage up to 1.3V and the clock to 4.3Ghz.

Then i ran aida64 for bench, after half an hour my pc started smoking (Like a huge cloud of smoke came out),

I've quickly turned off my pc, and when i opened up my case there was smoke coming from the cpu.

I though Now hold on a minute cpu was working while it was smoking so it couldn't be that,

so I've powered my pc up again, and it started to smoke again.

 

Turns out a spider has walked on the 8pin for cpu and shorted the 12V rail :P (i had connected only a 4pin)

 

Link to comment
Share on other sites

Link to post
Share on other sites

because even without a good stable PSU i've gotten up to 4.3Ghz stable!

Link to comment
Share on other sites

Link to post
Share on other sites

RIP evil Spider.

 

Hope the PC is okay doe.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

Probably is the psu that pumped 5v through it. Or the motherboard.

AMD Ryzen R7 1700 (3.8ghz) w/ NH-D14, EVGA RTX 2080 XC (stock), 4*4GB DDR4 3000MT/s RAM, Gigabyte AB350-Gaming-3 MB, CX750M PSU, 1.5TB SDD + 7TB HDD, Phanteks enthoo pro case

Link to comment
Share on other sites

Link to post
Share on other sites

Why were you OCing with a shitty PSU

 

I agree, that was a bad idea. It wasn't the CX430 was it, lol, jk. what psu do u have tho?

Link to comment
Share on other sites

Link to post
Share on other sites

Whitenergy 300w $10

Btw the overclocking works fine and is stable. that's not the reason for the magic smoke :P

Link to comment
Share on other sites

Link to post
Share on other sites

I agree, that was a bad idea. It wasn't the CX430 was it, lol, jk. what psu do u have tho?

The power supply is apparently 300W. The CX series doesn't have a 300W unit.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

The power supply is apparently 300W. The CX series doesn't have a 300W unit.

 

yeah i know the lowest is 430W, it was just a shot at the CX series

Link to comment
Share on other sites

Link to post
Share on other sites

Whitenergy 300w $10

Btw the overclocking works fine and is stable. that's not the reason for the magic smoke :P

Funny that a spider walked and shorted the pins. But that poor spider though.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

Funny that a spider walked and shorted the pins. But that poor spider though.

It should have known better than to walk across power connectors that have 30 amps running through them at a high enough voltage to jump into the spider :)

Intel i7 5820K (4.5 GHz) | MSI X99A MPower | 32 GB Kingston HyperX Fury 2666MHz | Asus RoG STRIX GTX 1080ti OC | Samsung 951 m.2 nVME 512GB | Crucial MX200 1000GB | Western Digital Caviar Black 2000GB | Noctua NH-D15 | Fractal Define R5 | Seasonic 860 Platinum | Logitech G910 | Sennheiser 599 | Blue Yeti | Logitech G502

 

Nikon D500 | Nikon 300mm f/4 PF  | Nikon 200-500 f/5.6 | Nikon 50mm f/1.8 | Tamron 70-210 f/4 VCII | Sigma 10-20 f/3.5 | Nikon 17-55 f/2.8 | Tamron 90mm F2.8 SP Di VC USD Macro | Neewer 750II

Link to comment
Share on other sites

Link to post
Share on other sites

It should have known better than to walk across power connectors that have 30 amps running through them at a high enough voltage to jump into the spider :)

he was like laying on the pins so it had gone trough him directly. the minimum voltage that can jump is somewhere around 100V (unless you have an inductive load on it) and that is just like a 1/10 of a mm. :)

Link to comment
Share on other sites

Link to post
Share on other sites

he was like laying on the pins so it had gone trough him directly. the minimum voltage that can jump is somewhere around 100V (unless you have an inductive load on it) and that is just like a 1/10 of a mm. :)

Don't spiders have some kind of secretion on their feet to stop them sticking to the glue on their webs? Maybe that is conductive, which would reduce the voltage needed to enter the spider.

Intel i7 5820K (4.5 GHz) | MSI X99A MPower | 32 GB Kingston HyperX Fury 2666MHz | Asus RoG STRIX GTX 1080ti OC | Samsung 951 m.2 nVME 512GB | Crucial MX200 1000GB | Western Digital Caviar Black 2000GB | Noctua NH-D15 | Fractal Define R5 | Seasonic 860 Platinum | Logitech G910 | Sennheiser 599 | Blue Yeti | Logitech G502

 

Nikon D500 | Nikon 300mm f/4 PF  | Nikon 200-500 f/5.6 | Nikon 50mm f/1.8 | Tamron 70-210 f/4 VCII | Sigma 10-20 f/3.5 | Nikon 17-55 f/2.8 | Tamron 90mm F2.8 SP Di VC USD Macro | Neewer 750II

Link to comment
Share on other sites

Link to post
Share on other sites

Don't spiders have some kind of secretion on their feet to stop them sticking to the glue on their webs? Maybe that is conductive, which would reduce the voltage needed to enter the spider.

yeah that might have been it, but he had to be fried a bit so his resistance was lower than 10ohm, but higher than 0.5 so it won't trigger the moterboard over current protection.

Link to comment
Share on other sites

Link to post
Share on other sites

yeah that might have been it, but he had to be fried a bit so his resistance was lower than 10ohm.

Sounds like the start of a research paper: "The Electrical Properties of tegenaria domestica in a Personal Computer Environment".

Intel i7 5820K (4.5 GHz) | MSI X99A MPower | 32 GB Kingston HyperX Fury 2666MHz | Asus RoG STRIX GTX 1080ti OC | Samsung 951 m.2 nVME 512GB | Crucial MX200 1000GB | Western Digital Caviar Black 2000GB | Noctua NH-D15 | Fractal Define R5 | Seasonic 860 Platinum | Logitech G910 | Sennheiser 599 | Blue Yeti | Logitech G502

 

Nikon D500 | Nikon 300mm f/4 PF  | Nikon 200-500 f/5.6 | Nikon 50mm f/1.8 | Tamron 70-210 f/4 VCII | Sigma 10-20 f/3.5 | Nikon 17-55 f/2.8 | Tamron 90mm F2.8 SP Di VC USD Macro | Neewer 750II

Link to comment
Share on other sites

Link to post
Share on other sites

Sounds like the start of a research paper: "The Electrical Properties of tegenaria domestica in a Personal Computer Environment".

"The unintentional scientific experiment."

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

"The unintentional scientific experiment."

"The unintentional scientific social experiment."

"Never quote yourself"

        -I need a better name

Link to comment
Share on other sites

Link to post
Share on other sites

That is not how you become spiderman!

Maximums - Asus Z97-K /w i5 4690 Bclk @106.9Mhz * x39 = 4.17Ghz, 8GB of 2600Mhz DDR3,.. Gigabyte GTX970 G1-Gaming @ 1550Mhz

 

Link to comment
Share on other sites

Link to post
Share on other sites

Cool PC and BBQ grill merry Christmas hehe :).

 

Intel i7 7820X (delidded) @ 4.9GHz - MSI X299 M7 ACK + EKWB Fullcover Block - G.Skill Trident Z 32GB @ 3466MHz - nVidia Titan Xp + EKWB Fullcover Block @ 2.1GHz - Samsung 960Pro 2x - WDD Blue 2TB - Seasonic 750W Platinum - modded Corsair 600C - Hardtubed Custom Watercooling

Link to comment
Share on other sites

Link to post
Share on other sites

poor spider :D

RIG #14670k @4.4 / 1.25v vcore. @ 4.5 / 1.3v vcore/ 1.95v vccin. MSI GAMING 4G GTX 970 @1540/3700 1.275v BIOS MOD. 16GB Kingston HyperX Savage RAM 2400mhz. MSI GAMING 5 Z97 MOBOFractal Design Define S. Dark Rock Pro 3. 850 EVO 250GB Seasonic M12II 620w
RIG #2: 4790k @ 4.6 / 1.25v vcore. EVGA SC ACX 2.0 980 SLI16GB Corsair Vengeance Pro 2400mhz. Asus MAXIMUS VII Hero Z97. Fractal Design Define R5. NH D15. 850 EVO 250GB AX 860
Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×