Rampage 5 Extreme case?

[Nachoz88]

Hi guys im looking for a sexy case that can fit the rampage 5 extreme with two way sli of GtX 980 g1 gaming with a H240-x or a h220-x cpu cooler.

 

I was looking at the H440 but ive seen that you might need to mod or it will touch the psu.

so what can i use??

 

[TheSLSAMG]

Corsair's 760T is pretty sexy.

[xox]

The 750d is a good call, I don't know about the modding bit with the h440, but whatever you choose, it should be fine.

[N00B_person]

your definition of sexy is veeery broad.  Any of Corsair's obsidian or graphite lineup would do okay and look good at the same time.

[C.G.F.Sabre]

 950d from corsair 

[H4X3R]

 950d from corsair 

Wot?

 

780T looks awesome (760T and phanteks enthoo luxe as well).

[C.G.F.Sabre]

Wot?

 

780T looks awesome (760T and phanteks enthoo luxe as well).

It is a personal opinion and plus the thing is giant and I like the minimalist cases so I gave a suggestion on that.

[Trik'Stari]

Air 540. If you want extra room for expanding those AIO loops then a CM HAF Stacker 935 would be good.

[airdeano]

It is a personal opinion and plus the thing is giant and I like the minimalist cases so I gave a suggestion on that.

 

the wot was 950D, as there is no such case at this time.

you might be thinking of the Corsair Obsidian 900D?

[C.G.F.Sabre]

the wot was 950D, as there is no such case at this time.

you might be thinking of the Corsair Obsidian 900D?

yeah that

[airdeano]

Hi guys im looking for a sexy case that can fit the rampage 5 extreme with two way sli of GtX 980 g1 gaming with a H240-x or a h220-x cpu cooler.

 

I was looking at the H440 but ive seen that you might need to mod or it will touch the psu.

so what can i use??

 

the H440 will fit, but being EATX the side cable pass-through will need some

attention as the grommets will not allow the board to sit flat.

 

 

 

pretty well-packed. arrived unblemished and unscarred. ripped the case apart to

reveal some unknowns from reviews and tossed my RIVE to find out if this will

accept E-ATX and it will, just have to remove the corner cable grommets.

if you don't it bends the board on the outer mounting locations. removing the

grommets allowed the board to sit flat. to guard the PCB, i would suggest

electrical tape to be place along the metallic area to guard against possible short

circuit. using the Thermaltake Water Extreme 2.0 (38mm thick radiator) and a

25mm thick fan and you'll see there is clearance to operate with some spare.

now be known, not all RAM/'sink locations are the same, so you'll prolly have to

test fit your H105 and Tt WE 2.0 to verify fitment with different chipsets and CPU

platforms. mounting the hoses towards the rear does restrict the rear i/o fan

(careful to notice this). may have to have the hose enter/exit towards front.

the fan is mounted in the lowest position.

 

 

 

so no real worry on the PSU interference, but the cable management issues.

[arnavvr]

Corsair Obsidian 750D,780t, enthoo pro, luxe and primo