Jump to content

What is this on my res?

KWelz
By KWelz
in Custom Loop and Exotic Cooling
 Share
Posted

I have had my Loop running for a couple weeks now and overall things seem good.   However I have noticed some sort of corrosion on the baffle in my res.   

You can see it in the following photos.  It looks cloudy but you can not feel anything.  It will not rub off but will come off with my thumb nail.  

 

Coolant is distilled water with a silver kill coil sitting in the res.  

 

IMG_0083.JPG

 

 

IMG_0084.JPG

Tell my tale to those who ask. Tell it truly; the ill deeds along with the good, and let me be judged accordingly.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

looks like you dint rinse before use

Thats that. If you need to get in touch chances are you can find someone that knows me that can get in touch.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

hmm did you run your loop through with some distilled water before filling it? 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Possibly metal buildup.  If you have 2 or more different metals in the loop it can cause corrosion.  The metal that corrodes away has to go somewhere and can build up in places.

Try taking it out and scrubbing it.  Or put a little alcohol on a cloth and wipe it off.

01010010 01101111 01100010  01001101 01100001 01100011 01010010 01100001 01100101

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

looks like you dint rinse before use

 

hmm did you run your loop through with some distilled water before filling it? 

 

This ^ ^

Specs: CPU - Intel i7 8700K @ 5GHz | GPU - Gigabyte GTX 970 G1 Gaming | Motherboard - ASUS Strix Z370-G WIFI AC | RAM - XPG Gammix DDR4-3000MHz 32GB (2x16GB) | Main Drive - Samsung 850 Evo 500GB M.2 | Other Drives - 7TB/3 Drives | CPU Cooler - Corsair H100i Pro | Case - Fractal Design Define C Mini TG | Power Supply - EVGA G3 850W

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I just noticed you said 2 weeks old.  So its probably what the others have said

01010010 01101111 01100010  01001101 01100001 01100011 01010010 01100001 01100101

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Filled it with Distilled water.  Ran it for about 5 hours then drained and refilled.  Should I have done more?   I am far from an expert obviously...

Tell my tale to those who ask. Tell it truly; the ill deeds along with the good, and let me be judged accordingly.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Filled it with Distilled water.  Ran it for about 5 hours then drained and refilled.  Should I have done more?   I am far from an expert obviously...

That should have done it. I run the whole loop through with a few gallons of distilled water directly into the sink myself. I need someone to hold things for me obviously. 

So that may not be the issue

Parts list please? 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

hmm did you run your loop through with some distilled water before filling it?

He said his coolant IS distilled water, and not regular coolant

Having problems with your fresh Windows 10 install? PM Me!
Windows 10- Want To Disable Telemetry, Disable Cortana, Disable Windows Updates? Look at my guide HERE
LTT Beginners Guide  | Community Standards | TN&R Posting Guidelines

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

He said his coolant IS distilled water, and not regular coolant

Right, but when you get new parts like acrylic reservoirs and radiators, you need to run water through the loop and into a sink or something in order to get rid of any gunk or particles/glue bits from the manufacturing process. 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

It is this Kit.  

http://www.frozencpu.com/products/22865/ex-wat-295/Phobya_Pure_Performance_Liquid_Cooling_Kit_-_360LT.html?tl=c321s2233b189

 

Phobya 60mmx260 Rad.  

The aforementioned Res. 

EK waterblock for my 780ti

Also running the loop through my VI Formula.   

Tell my tale to those who ask. Tell it truly; the ill deeds along with the good, and let me be judged accordingly.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm just going to let you know that I never ran my loop with distilled water prior to filling and haven't had and issues. I've never heard anyone even say to do that. My opinion on your issue would be to drain and refill. Get all the crap out. Look for more crap in the res. If it comes again then there is a bigger issue.

PC: 4770K @ 4.0 GHz --- Maximus VI Hero --- 8 GB 2133 MHz Corsair Vengeance Pro --- EVGA 780 TI Classified @ 1300 MHz --- Samsung Evo 250 GB --- Corsair RM 750 --- Corsair Carbide Air 540 --- CM Storm Rapid-I (MX Blues with PMK Evergreen Keycaps) --- Windows XP --- Razer Naga --- Custom Loop Parts: 380I, EKWB 780 Classy Waterblock and Backplate, 240mm and 360mm XT45, Swiftech MCP655, EKWB multi option reservoir, Mayhems Pastel Red, Primochill Primoflex Advanced Clear Tubing, 5 SP 120 Quiet Editions --- Mobile: Surface Pro 3 (i5 128gb) with JD40 (MX Clears) and Microsoft Sculpt Mouse --- Galaxy S6

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm just going to let you know that I never ran my loop with distilled water prior to filling and haven't had and issues. I've never heard anyone even say to do that. My opinion on your issue would be to drain and refill. Get all the crap out. Look for more crap in the res. If it comes again then there is a bigger issue.

People do that all of the time, OP even did it, though with the pump -.-. I wouldn't think it would cause a gunk issue like this, but if there's metal shavings in a radiator or glue bits in a reservoir, they can cause damage to the pump, so I always rinse before connecting the pump. I've only ever got something out like once personally, so it's optional I guess, and it would be an issue of cheap parts/bad manufacturing process. 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

People do that all of the time, OP even did it, though with the pump -.-. I wouldn't think it would cause a gunk issue like this, but if there's metal shavings in a radiator or glue bits in a reservoir, they can cause damage to the pump, so I always rinse before connecting the pump. I've only ever got something out like once personally, so it's optional I guess, and it would be an issue of cheap parts/bad manufacturing process.

I mean I shook the radiators around but that was it.

PC: 4770K @ 4.0 GHz --- Maximus VI Hero --- 8 GB 2133 MHz Corsair Vengeance Pro --- EVGA 780 TI Classified @ 1300 MHz --- Samsung Evo 250 GB --- Corsair RM 750 --- Corsair Carbide Air 540 --- CM Storm Rapid-I (MX Blues with PMK Evergreen Keycaps) --- Windows XP --- Razer Naga --- Custom Loop Parts: 380I, EKWB 780 Classy Waterblock and Backplate, 240mm and 360mm XT45, Swiftech MCP655, EKWB multi option reservoir, Mayhems Pastel Red, Primochill Primoflex Advanced Clear Tubing, 5 SP 120 Quiet Editions --- Mobile: Surface Pro 3 (i5 128gb) with JD40 (MX Clears) and Microsoft Sculpt Mouse --- Galaxy S6

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I saw that a lot of people clean their res before use.  It made me nervous enough that I pulled the loop apart and cleaned the pump and CPU block.   That is actually when I noticed this.  When I add my second rad I will be flushing it first.  

Tell my tale to those who ask. Tell it truly; the ill deeds along with the good, and let me be judged accordingly.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It is this Kit.  

http://www.frozencpu.com/products/22865/ex-wat-295/Phobya_Pure_Performance_Liquid_Cooling_Kit_-_360LT.html?tl=c321s2233b189

 

Phobya 60mmx260 Rad.  

The aforementioned Res. 

EK waterblock for my 780ti

Also running the loop through my VI Formula.

Well, it's a kit, so I assume there's not mixed metals, lol. Idk, unless someone comes up with an answer, I'd clean out the res, rinse the loop, and refill and see if it happens again. You have a silver coil, so not an issue there....is it plasticizer I wonder?

 

http://www.overclock.net/t/1380775/what-is-plasticizer

http://www.overclock.net/t/1199158/plasticizer-problems-discussion-gallery

 

edit

 

I see so me pople saying Masterkleer tubing is working fine for them with this issue, others saying this issue happened within weeks. 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×