The perfect ITX case

[torment lm]

Hey guys

 

A friend of mine and me is going to make a little something(cannot reveal yet)

 

But we are trying to get your visions of a perfect ITX case.

 

So what we wanted from you guys was for you guys to complete our little survey to help us.

 

The survey is used to guide us towards the general specs of the perfect ITX case.

 

So please help us out to be honest if we are going to get a real use of this we need around 1.000 people to participate!!

Hope you will help us out

 

Link: https://da.surveymonkey.com/s/V26HMTX

[Rorgash]

a few missing questions in my opinion, such as direction of the motherboard, flat or sideways which is important

[MrSuperb]

That's simple

 

[torment lm]

I completely agree

 

Think we've added it now, not sure pretty new to making these kind of things.

[torment lm]

That's simple

 

Don't you think that it's pretty --snip-- do just post it? well I disagree with you on the Ncase.

[MrSuperb]

Don't you think that it's pretty --snip--do just post it? well I disagree with you on the Ncase.

 

I filled out your survey before posting that picture

 

 

out of curiosity what don't you like about the M1?

[LawrenceBarnes2013]

i suggest the, Silverston FT03 or the 250D, or it just hase to Compact, Small with good airflow and Liquid cooling option 

[Kyuubixchidori]

Don't you think that it's pretty --snip-- do just post it? well I disagree with you on the Ncase.

I think he just means that's his idea of a perfect case:P no harm. 

[TymmVonD]

Please get a Swedish friend to help out with the design. JK

[torment lm]

Please get a Swedish friend to help out with the design. JK

I'm not sure yet of how that we would make it so that's very to far into the future but I have my connections

[TymmVonD]

On a serious note. The Prodigy has been the easiest ITX to build in for me. 2nd would be the CM Elite 130. If the entire exterior can be removed to make building easier, that would go a long way with me. The window can't be too close to a large single GPU. My Prodigy was almost too small for my VaporX.  A fan tray would be interesting. Screw the fans into the tray, then slot it in place. Modularity will win when it comes to ITX. Everything has to be optional.

[torment lm]

I've noticed the missing 0 option on the 5.25 and will note that for the next one.

[NannerBeans]

-snip-

 

Man I want one of those but they're not selling em anymore and don't want to pay $400 on ebay for it

[Shaqo_Wyn]

That's simple

 

 

Such sexyness, I can't... *dies*

[MrSuperb]

Man I want one of those but they're not selling em anymore and don't want to pay $400 on ebay for it

 

They just finished the pre-order for the 2nd run ... If you really want one you might just contact wahaha360 or Necere over at HardForum.

I am pretty sure they ordered some extra ones again

 

or contact them via email http://www.ncases.com/v2/contact.php

[NannerBeans]

They just finished the pre-order for the 2nd run ... If you really want one you might just contact wahaha360 or Necere over at HardForum.

I am pretty sure they ordered some extra ones again

 

or contact them via email http://www.ncases.com/v2/contact.php

I assume you got in the first run? How long did it take from pre-order to actually getting it?

[Probenja]

It might not be the best, but its the one i like the most:

 

[spwath]

Ft03 mini deff

[Whaler_99]

I love my Aerocool DS Cube - very simple and plain and super quiet, support for a 240 rad, 200mm intake and 140 exhaust and enough drives to make it workable as a gaming system with some storage.

 

I don't want a window side on this, wish they had perforated side panel, for better air intake to my 780.

[Gachr]

ITX cases are great, and there are lots of them, but motherboards stop the whole ITX thing. If you don't spend a lot of money, you've got a mobo with one fan connector and things like this, I bought an mITX mobo and I regret it, mATX is way better.

[MrSuperb]

I assume you got in the first run? How long did it take from pre-order to actually getting it?

 

indiegogo campaign ended august 31st.

got my case on november 8th.

so roughly 2 months.

[NannerBeans]

indiegogo campaign ended august 31st.

got my case on november 8th.

so roughly 2 months.

I just heard back from the guy. He said he has extras of the Version 1 that he can sell me and he said I can also join the version 2 run also. I think I'm going to stick with the V1 to get it faster. None of the changes are really ground breaking. 

[mapegl]

I thought about building my own case with basically a 200mm in the front and then a design with PSU at the bottom and mobo just above the PSU.....and then the corsair 250D came out. For me, that is the perfect itx-case.it is as compact as you can get with my requirements.

The only thing you could change here would be a smaller special PSU maybe. That way you could lower everything down and have he same compatibility. And you could decrease the space between the front and the motherboard.......but then you lose flexibility. So yeah, I think that is as perfect as it gets for me.

[Armando B. Antolin Sr.]

Hi..to everyone. .pls.help me to return my mobile logo to samsung.after I make reboot then automatically open but the logo is changed by MEDIATEK ANDRIOD.. HOW CAN I RETURN NY SAMSUNG LOGO.GALAXY NOTE3...ITX MOBILE..PLS.HELP

[Butterfish]

I assume you got in the first run? How long did it take from pre-order to actually getting it?

I got mine on the second run. Took around 2 months too. Ordered 22/06/14 and got it around 15/08/14