Need some proffessinal help on what should i improve or if there is any need.

[Razni11]

Budget (including currency): 

Country: Estonia

Games, programs or workloads that it will be used for: 

Other details (existing parts lists, whether any peripherals are needed, what you're upgrading from, when you're going to buy, what resolution and refresh rate you want to play at, etc): 

 

Reason why im asking for help in improvement is that some software still crashes without reason and i got some anomalies in cad programs with coordinates.

Ive done many format C but the problems still emerges.

[filpo]

2 minutes ago, Razni11 said:

Budget (including currency): 

Country: Estonia

Games, programs or workloads that it will be used for: 

Other details (existing parts lists, whether any peripherals are needed, what you're upgrading from, when you're going to buy, what resolution and refresh rate you want to play at, etc): 

 

Reason why im asking for help in improvement is that some software still crashes without reason and i got some anomalies in cad programs with coordinates.

Ive done many format C but the problems still emerges.

your 4090 is telling us that it has only 2.5 gigs of vram, but in truth it should have around 24. Have you downloaded your graphics drivers, bios updates and chipset drivers?

[PeachyUwUSenpai]

You may want to  double check your power mode is set to high. had a friend who was running a 4090 in lower power mode by accident it acted very odd. otherwise how legit was the people you bought your rtx4090 from because that is sus output hopefully just outdated drivers like flipo mentioned and not a fake 4090

[PeachyUwUSenpai]

Also what's your powersupply 

[Nuzicx]

The GPU is likely put itself in low performance mode because his system isn't under any load when Speccy collected stats, hence the false reading of VRAM

[Waqas409]

I'd say CPU. 

[DoctorNick]

49 minutes ago, Razni11 said:

Budget (including currency): 

Country: Estonia

Games, programs or workloads that it will be used for: 

Other details (existing parts lists, whether any peripherals are needed, what you're upgrading from, when you're going to buy, what resolution and refresh rate you want to play at, etc): 

 

Reason why im asking for help in improvement is that some software still crashes without reason and i got some anomalies in cad programs with coordinates.

Ive done many format C but the problems still emerges.

Hello, have you tried disabling XMP (DOCP) and run ram on auto settings? (2133mhz). Is your ram kit 4x16gb or 2x32?

[Waqas409]

To everyone,
Speccy does not give correct information so yea! 

[QuantumSingularity]

This sounds like motherboard-memory compatibility issue. Asus mobos... no really great memory compatibility. Try first with 1 stick out. 

[Razni11]

Here is my powersupply: be quiet! STRAIGHT POWER 10 1000W 80PLUS GOLD

 

Im thinking about an upgrade also. But i dont know, should i go back to intel or stay with amd.

And for that i need a new mobo on both ways.

 

What cpu and mobo you reccomend?