DIY wireless charging 3d print

[rkunati]

Hello,

 

I want to create my own Qi wireless charger in the shape of the Arc Reactor from Iron man. I 3d printed this (https://www.thingiverse.com/thing:3105817) at my local library. However, by the time I got to buying the PCB mentioned (https://www.aliexpress.us/item/2255800108433116.html?spm=a2g0s.9042311.0.0.de684c4duIh4dn&gatewayAdapt=glo2usa4itemAdapt#nav-review) the item is no longer available; despite it saying there are 2124 pieces available. I was wondering if someone knows about a similar PCB that I could use. I do not need Leds, but I do need the PCB and the coil to be one piece.

[manikyath]

just buy whatever cheapest qi charging pad, and rip the guts out of it.

[kb5zue]

The reason that it is no longer available is because the item got caught up in the mess with the trade embargo with China since that is where this item is sourced from.  Sorry, but that problem is only going to expand with time and the embargo grows even more.  I use, or did use, a Chinese website for a few things in my electronics hobby and they have all gone by the way of the Dodo bird.  And there is no telling how long the trade embargo will last.  More than likely a very long time.

 

Take care and good luck.