Posted July 3, 2023 LED Debug code 27. What does it mean? [We moved from one place to another. After moving trying to turn it on No display] 1. After i click the PC power up button. 2. At the 'LED Debug code' it rolls & changes till Code 27 3. Then PC auto Boots again and 'LED Debug Code' rolls till 27 4. PC gets stuck at Debug Code 27, no more auto BOOT. Some other LEDs on the MOBO ---------------------------------- There are 4 initialization LEDs [CPU, DRAM, BOOT, VGA] 5. Those 4 initialization LEDs :- It gets stuck on DRAM, (2nd Step) doesn't reach BOOT. 6. i have another PC System, checked the GPU and RAM, those are fine Btw. Can static electricity (shocks) cause any damage? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 3, 2023 I'd suggest removing/reseating the RAM. ESD has always been a potential hazard to electronics. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 3, 2023 If your PC components were inside a closed case then ESD is unlikely to have been a problem. The case acts as a Faraday cage. I think what could have happened is you pushed the CMOS reset or Qflash button in the back on the outside. Do another CMOS reset and set up your memory. This post has been ninja-edited while you weren't looking. I'm a used parts bottom feeder. Your loss is my gain. I like people who tell good RGB jokes. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
.thumb.jpeg.9babd505c85c11addf31a285a02547cc.jpeg)
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now