Jump to content

Lian li 011 dx 3 x 360 rads 2 45mm 1 30 temps is 70 degrese gpu and cpu 65-70 while gaming

Hypothermia
 Share
Posted

Fans speed are going even full speed any idea whats wrong?

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, Hypothermia said:

Fans speed are going even full speed any idea whats wrong?

 

Well.. List your parts so we know what you are running, some parts run hotter than others.  Refreshrate? Resolution?
70c on GPU and 65-70c on CPU is quite normal during gaming, nothing to worry about. The 100% fan speed is strange though.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

1440p 144 hz water temp 46 degrese cpu ryzen 7 5700x gpu rx 6950xt 32 gb ram msi.mag b550tomahawk mb and 850 wats gigabyte psu i wonder if psu is fine

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Sounds about right. Poor layout prolly. Or bad fans. 

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Mick Naughty said:

Sounds about right. Poor layout prolly. Or bad fans. 

What do u mean poor layout? Fans ek vardars evo

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

is your fans set to all exhaust ?

 

IMO coolant at 46c isn't ideal, also what's your ambient temp?

Ryzen 5700x + EK Supremacy D-RGB | 2x8 GB DDR4 Klevv 3200 MT/s | MSI B550M Mortar | Palit 3070 GamingPro LHR + Bykski N-PT3070PRO-X | Corsair RM750 | Alphacool EPDM + QDC | Aquacomputer Quadro + HighFlow2 | EK D5 XTOP | Freezemod 360 30mm rad + Barrow Dabel-20b 360 20mm | Barrow & Freezemod fittings | Corsair 5000D Airflow
 
Audio: beyerdynamic DT 900 Pro X + iFi ZEN Air DAC + Razer Seiren Mini
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 hours ago, fonzz1e said:

is your fans set to all exhaust ?

 

IMO coolant at 46c isn't ideal, also what's your ambient temp?

All set exhaust 46 colant under load

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
13 hours ago, Hypothermia said:

What do u mean poor layout? Fans ek vardars evo

The air getting in and it getting out. Especially if using a rad in every spot for the case.

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
12 hours ago, Hypothermia said:

All set exhaust 46 colant under load

its like saying:  my radiators dont get any air

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What case?

Can you post a picture of the loop?

Does having the side panel off help at all?

 

Sounds like you have very bad or very little air flow.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 hours ago, Neggy-Z said:

What case?

Can you post a picture of the loop?

Does having the side panel off help at all?

 

Sounds like you have very bad or very little air flow.

Subject says O11D.

 

@Hypothermia, if all your fans are set to exhaust I would flip one of those radiators around to intake. Like if you're using a bottom rad make that one intake into the case, and you could probably leave the side and top as exhaust.

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted

remove the glass panels and dust filters and give it a try, see if anything changes

CPU: i7 8700K OC 5.0 gHz, Motherboard: Asus Maximus VIII Hero (Z170), RAM: 32gb Corsair Vengeance RGB 3200 mHz, GPU: Asus Strix OC gtx 1080ti, Storage: Samsung 950pro 500gb, samsung 860evo 500gb, 2x2Tb + 6Tb HDD,Case: Lian Li PC O11 dynamic, Cooling: Very custom loop.

CPU: i7 8700K, Motherboard Asus z390i, RAM:32gb g.skill RGB 3200, GPU: EVGA Gtx 1080ti SC Black, Storage: samsung 960evo 500gb, samsung 860evo 1tb (M.2) Case: lian li q37. Cooling: on the way to get watercooled (EKWB, HWlabs, Noctua, Barrow)

CPU: i7 9400F, Motherboard: Z170i pro gaming, RAM: 16gb Corsair Vengeance RGB 3200 mHz, GPU: Sapphire Vega56 pulse with Bykski waterblock, Storage: wd blue 500gb (windows) Samsung 860evo 500Gb (MacOS), PSU Corsair sf600 Case: Motif Monument aluminium replica, Cooling: Custom water cooling loop

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 3/8/2023 at 4:55 PM, Slizzo said:

Subject says O11D.

 

@Hypothermia, if all your fans are set to exhaust I would flip one of those radiators around to intake. Like if you're using a bottom rad make that one intake into the case, and you could probably leave the side and top as exhaust.

 

IMG20230319163514.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 hours ago, NorKris said:

u did not save on tube thats for sure XD

I didnt😃

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
26 minutes ago, Hypothermia said:

I didnt😃

but ye looks like u have 0 intake in ur system 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
43 minutes ago, Hypothermia said:

I have side set as intake but same

so the little air the other rads are getting is alrdy hot ;D 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What's the water temperature with the side off?  45C is what I get with a 240mm radiator by itself so something is massively wrong with that much radiator you have.  (Also should ask what the ambient is)

Workstation:  14700nonk || Asus Z790 ProArt Creator || MSI Gaming Trio 4090 Shunt || Crucial Pro Overclocking 32GB @ 5600 || Corsair AX1600i@240V || whole-house loop.

LANRig/GuestGamingBox: 9900nonK || Gigabyte Z390 Master || ASUS TUF 3090 650W shunt || Corsair SF600 || CPU+GPU watercooled 280 rad pull only || whole-house loop.

Server Router (Untangle): 13600k @ Stock || ASRock Z690 ITX || All 10Gbe || 2x8GB 3200 || PicoPSU 150W 24pin + AX1200i on CPU|| whole-house loop

Server Compute/Storage: 10850K @ 5.1Ghz || Gigabyte Z490 Ultra || EVGA FTW3 3090 1000W || LSI 9280i-24 port || 4TB Samsung 860 Evo, 5x10TB Seagate Enterprise Raid 6, 4x8TB Seagate Archive Backup ||  whole-house loop.

Laptop: HP Elitebook 840 G8 (Intel 1185G7) + 3080Ti Thunderbolt Dock, Razer Blade Stealth 13" 2017 (Intel 8550U)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 3/28/2023 at 10:47 PM, AnonymousGuy said:

What's the water temperature with the side off?  45C is what I get with a 240mm radiator by itself so something is massively wrong with that much radiator you have.  (Also should ask what the ambient is)

Ambient is 23  with side panel off water still 39.8 40

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

"my water temp was 39.8 to 40 while i was *Blank*  " 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 3/28/2023 at 9:11 AM, Hypothermia said:

I have side set as intake but same

Which has a radiator in front of it and then a res. You are probably hot boxing the inside of this case. I'd at least re-orient the bottom fans to intake. But really, I'd just rethink how you have this whole thing laid out. 

 

I have an O11-D as well. Its very easy to screw up the internal temps on this case. This is mine below. I am not 100% happy with this either so I am likely going to ditch the side intakes, order the custom front panel from PPCs that will let me put my intake fans on the front of the case. I think that will alleviate a lot of my problems. Anyway, I have a thin 360 radiator (HWLabs 360GTS) on the bottom of the case with fans intaking (pull in this case), with a thick 360 rad (HWLabs 360GTX) on top exhausting. No rad on the side intakes, but there is a reservoir there.

 

image.thumb.png.7ac48dbca3499ecfac2d4e17cd1126a7.png

Zen 3 Daily Rig (2022 - Present): AMD Ryzen 9 5900X + Optimus Foundations AM4 | Nvidia RTX 3080 Ti FE + Alphacool Eisblock 3080 FE | G.Skill Trident Z Neo 32GB DDR4-3600 (@3733 c14) | ASUS Crosshair VIII Dark Hero | 2x Samsung 970 Evo Plus 2TB | Crucial MX500 1TB | Corsair RM1000x | Lian Li O11 Dynamic | LG 48" C1 | EK Quantum Kinetic TBE 200 w/ D5 | HWLabs GTX360 and GTS360 | Bitspower True Brass 14mm | Corsair 14mm White PMMA | ModMyMods Mod Water Clear | 9x BeQuiet Silent Wings 3 120mm PWM High Speed | Aquacomputer Highflow NEXT | Aquacomputer Octo

 

Test Bench: 

CPUs: Intel Core 2 Duo E8400, Core i5-2400, Core i7-4790K, Core i9-10900K, Core i3-13100, Core i9-13900KS

Motherboards: ASUS Z97-Deluxe, EVGA Z490 Dark, EVGA Z790 Dark Kingpin

GPUs: GTX 275 (RIP), 2x GTX 560, GTX 570, 2x GTX 650 Ti Boost, GTX 980, Titan X (Maxwell), x2 HD 6850

Bench: Cooler Master Masterframe 700 (bench mode)

Cooling: Heatkiller IV Pro Pure Copper | Koolance GPU-210 | HWLabs L-Series 360 | XSPC EX360 | Aquacomputer D5 | Bitspower Water Tank Z-Multi 250 | Monsoon Free Center Compressions | Mayhems UltraClear | 9x Arctic P12 120mm PWM PST

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×