3.5 slot GPU SFF Case

[Sam J]

Hello!

 

Im looking for a quality small case that can handle a 3.5 slot gpu. I currently have an A4-SFX with a 2 slot 2080 super. I stupidly did not look at slot size or anything when getting my 3080 and now cannot fit in the case. I realize a 3.5 slot SFF is rare if it exists at all. What are some options that can still fit 3.5 slot?

 

My card is the Aorus RTX3080 MASTER 10G

Dimensions: L=319 W=140 H=70 mm

[Dogzilla07]

SSUPD Meshlicious fits up to 4.3L gpus (@ ~14L)

[Kinda Bottlenecked]

You'll probably have an easier time with the nr200

[Sam J]

23 minutes ago, Kinda Bottlenecked said:

You'll probably have an easier time with the nr200

Will the nr200 fit a 70mm thick gpu? Its listed up to 60mm. Definitely an interesting option if it works!

[Kinda Bottlenecked]

2 minutes ago, Sam J said:

Will the nr200 fit a 70mm thick gpu? Its listed up to 60mm. Definitely an interesting option if it works!

 

Yea probably 

[Jeppes]

1 hour ago, Sam J said:

Will the nr200 fit a 70mm thick gpu? Its listed up to 60mm. Definitely an interesting option if it works!

I would risk it. At worst you have to cut out a gpu-sized hole into to the bottom mesh and get improved airflow as a bonus.

[DEADPOOLSMOM]

5 hours ago, Sam J said:

Hello!

 

Im looking for a quality small case that can handle a 3.5 slot gpu. I currently have an A4-SFX with a 2 slot 2080 super. I stupidly did not look at slot size or anything when getting my 3080 and now cannot fit in the case. I realize a 3.5 slot SFF is rare if it exists at all. What are some options that can still fit 3.5 slot?

 

My card is the Aorus RTX3080 MASTER 10G

Dimensions: L=319 W=140 H=70 mm

I would try and trade someone for a FE card if possible. Jayztwocents just did a video on this. His big AIB 3090 was choking for air in his SFF case then he swapped in a 3080ti FE and it worked a lot better

[DEADPOOLSMOM]

5 hours ago, Kinda Bottlenecked said:

You'll probably have an easier time with the nr200

Bruh i5 2400 gang represent. That was my first ever "Real" cpu. I had a lenovo ideacentre prebuilt with an i5 2400 and a sappire amd rx 270 back in the day. It was fast for a long time. You thinkin on grabbin a 12400 or somethin soon? Your 2080ti must be getting CRAZY bottlenecked by that thing, even though I hate using that word 

[thrasher_565]

3 hours ago, Jeppes said:

I would risk it. At worst you have to cut out a gpu-sized hole into to the bottom mesh and get improved airflow as a bonus.

and or add taller feet

[Dogzilla07]

Taller feet/cut-out/de-shroud would be needed almost certainly with the aorus master. NR200P might be easier to build in with other cards, but it will not be an easy time with your card (and Meshlicious is 14.67L vs 20.3L so 50% smaller).

 

@Sam JSSUPD Meshlicious is just a much better option overall, as you don't need soft-mod, nor hard-mod anything. Just get the full both side mesh version with the riser cable included and an extra 90 degree (you only get 1 HDMI in the box), Display port cable from either their website or amazon, and a longer adjustable HDMI if u need it and you're set. (This is the only true downside of the Meshlicious, normal cables don't fit inside the GPU underneath). But getting an additional cable is cheaper and easier than modding the NR200P.

 

What monitors and how many are you using ?

 

https://www.amazon.com/LINKUP-High-Speed-Connector-Digital-Compatible/dp/B087WG2V6K

https://www.amazon.com/Degree-DisplayPort-Cable-Right-Angle/dp/B09PR7VM8R

https://www.ssupd.co/collections/frontpage/products/ome-dp

 

Also what CPU are you using ?, Meshlicious supports 240mm, or 280mm AIO in the front, which is more than enough for almost any CPU.