Jump to content

AMD pbo broke my pc

blocky3321
 Share
Posted

after enabling pbo 2600x my pc stuck in a loop of trying to boot and shuting down i have tried clearing my cmos

mbo: B450M steel legend 

ram:2x8 3200mhz

gpu: 1080

please help me

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

How did you clear Cmos? If you didn't do it correctly it might not have cleared!

| If someones post is helpful or solves your problem please mark it as a solution 🙂 |

I am a human that makes mistakes! If I'm wrong please correct me and tell me where I made the mistake. I try my best to be helpful.

System Specs

<Ryzen 5 3600 3.5-4.2Ghz> <Noctua NH-U12S chromax.Black> <ZOTAC RTX 2070 SUPER 8GB> <16gb 3200Mhz Crucial CL16> <DarkFlash DLM21 Mesh> <650w Corsair RMx 2018 80+ Gold> <Samsung 970 EVO 500gb NVMe> <WD blue 500gb SSD> <MSI MAG b550m Mortar> <5 Noctua P12 case fans>

Peripherals

<Lepow Portable Monitor + AOC 144hz 1080p monitor> 

<Keymove Snowfox 61m>

<Razer Mini>

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
11 minutes ago, SignatureSigner said:

How did you clear Cmos? If you didn't do it correctly it might not have cleared!

i did what my mbo manual said unplug the system wait 15 sec i waited a minute short the two leads caled clrcmos and doit for five sec i waited 30 sec

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Did you pull the CMOS battery?

| If someones post is helpful or solves your problem please mark it as a solution 🙂 |

I am a human that makes mistakes! If I'm wrong please correct me and tell me where I made the mistake. I try my best to be helpful.

System Specs

<Ryzen 5 3600 3.5-4.2Ghz> <Noctua NH-U12S chromax.Black> <ZOTAC RTX 2070 SUPER 8GB> <16gb 3200Mhz Crucial CL16> <DarkFlash DLM21 Mesh> <650w Corsair RMx 2018 80+ Gold> <Samsung 970 EVO 500gb NVMe> <WD blue 500gb SSD> <MSI MAG b550m Mortar> <5 Noctua P12 case fans>

Peripherals

<Lepow Portable Monitor + AOC 144hz 1080p monitor> 

<Keymove Snowfox 61m>

<Razer Mini>

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, SignatureSigner said:

Did you pull the CMOS battery?

tried it with and without also tried just puling the battery and holding the power button 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

cpu r5 2600x 

gpu zotac 1080

ram hyperX 2x8 3200 mhz

mbo Asrock B450M steel legend

there is no video output the whole time. i have tried to clear the cmos 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)

Did you remove the cmos battery? Not by the jumper

Edited by Latvian Video
Forgot the title has the problem
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Latvian Video said:

Did you recently build it, did you recently change some component? My brother had a similar problem when he got a new graphics card, he needed to let it run for a like 5min, then it booted to the "new hardware detected, press f1 to setup"

no it hapened when i had all original parts except ram that i changed a day later whil the pc was not working 

ir labi redzet velkadu  latvieti

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, blocky3321 said:

no it hapened when i had all original parts except ram that i changed a day later whil the pc was not working 

ir labi redzet velkadu  latvieti

Try removing the CMOS battery.
Man liekas ka tu esi pirmais Latvietis kuru te esmu redzējis

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Latvian Video said:

Try removing the CMOS battery.
Man liekas ka tu esi pirmais Latvietis kuru te esmu redzējis

tred removing cmos but i will try your method

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
23 minutes ago, Latvian Video said:

Try removing the CMOS battery.
Man liekas ka tu esi pirmais Latvietis kuru te esmu redzējis

tried youyr method didnt work any ideas i will try any thing

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, blocky3321 said:

tried youyr method didnt work any ideas i will try any thing

 

Pamēģini atvienot visus cietos diskus, mosk BIOS automātiski ieies, ja ne, tad problēma kaut kur citur 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Latvian Video said:

Pamēģini atvienot visus cietos diskus, mosk BIOS automātiski ieies, ja ne, tad problēma kaut kur citur 

 

problema tad kaut kur citur jo es izmantoju amd auto overclock un pectam vairs neiet

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
43 minutes ago, blocky3321 said:

problema tad kaut kur citur jo es izmantoju amd auto overclock un pectam vairs neiet

 

 

Mosk tad procis nomira, bisk vel neta pameklesu

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
53 minutes ago, blocky3321 said:

problema tad kaut kur citur jo es izmantoju amd auto overclock un pectam vairs neiet

 

 

Pamegini iznemt RAM un vienu ielikt cita vieta

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×