Jump to content

12 foot Monolith found in Utah.

whm1974
4 minutes ago, SpaceGhostC2C said:

I suddenly feel the need to smash someone's head with a femur.

I want to watch the Movie and read the Book again.

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, Lord Vile said:

90lbs is like 40KG it's not that hard.  One side of 360x60x1 steel at 7.9g per cm^3 weighs 170KG or 375lbs. Multiply that by 4 and add two end plates at 60x60 and you end up with around 740KG or 1620lbs. So with a frame work you're talking 800KG or 1760lbs. To weld it there you'd need welding gear which ain't light and you'd be welding on sand with plates that weigh nearly 400lbs.

1cm is unusually thick. Where did you get that number from? I didn't see that listed anywhere. So, realistically, you're probably looking at half, if not less than that for weight. It would only take maybe 6 people to lift that, so not hard at all. Welding gear, while not light, can easily be rolled around. The problems you're talking about really aren't that complicated to overcome.

CPU: Ryzen 9 5900 Cooler: EVGA CLC280 Motherboard: Gigabyte B550i Pro AX RAM: Kingston Hyper X 32GB 3200mhz

Storage: WD 750 SE 500GB, WD 730 SE 1TB GPU: EVGA RTX 3070 Ti PSU: Corsair SF750 Case: Streacom DA2

Monitor: LG 27GL83B Mouse: Razer Basilisk V2 Keyboard: G.Skill KM780 Cherry MX Red Speakers: Mackie CR5BT

 

MiniPC - Sold for $100 Profit

Spoiler

CPU: Intel i3 4160 Cooler: Integrated Motherboard: Integrated

RAM: G.Skill RipJaws 16GB DDR3 Storage: Transcend MSA370 128GB GPU: Intel 4400 Graphics

PSU: Integrated Case: Shuttle XPC Slim

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

Budget Rig 1 - Sold For $750 Profit

Spoiler

CPU: Intel i5 7600k Cooler: CryOrig H7 Motherboard: MSI Z270 M5

RAM: Crucial LPX 16GB DDR4 Storage: Intel S3510 800GB GPU: Nvidia GTX 980

PSU: Corsair CX650M Case: EVGA DG73

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

OG Gaming Rig - Gone

Spoiler

 

CPU: Intel i5 4690k Cooler: Corsair H100i V2 Motherboard: MSI Z97i AC ITX

RAM: Crucial Ballistix 16GB DDR3 Storage: Kingston Fury 240GB GPU: Asus Strix GTX 970

PSU: Thermaltake TR2 Case: Phanteks Enthoo Evolv ITX

Monitor: Dell P2214H x2 Mouse: Logitech MX Master Keyboard: G.Skill KM780 Cherry MX Red

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

14 hours ago, dizmo said:

1cm is unusually thick. Where did you get that number from? I didn't see that listed anywhere. So, realistically, you're probably looking at half, if not less than that for weight. It would only take maybe 6 people to lift that, so not hard at all. Welding gear, while not light, can easily be rolled around. The problems you're talking about really aren't that complicated to overcome.

Easy maths, it’s also not that thick, whenever I’ve moved plates of steel that are built well enough to hold a person without bending they’ve been around that thick. 
 

Or they just made the box and stuck a veneer onto it? 

Dirty Windows Peasants :P ?

Link to comment
Share on other sites

Link to post
Share on other sites

Work Rigs - 2015 15" MBP | 2019 15" MBP | 2021 16" M1 Max MBP | Lenovo ThinkPad T490 |

 

AMD Ryzen 9 5900X  |  MSI B550 Gaming Plus  |  64GB G.SKILL 3200 CL16 4x8GB |  AMD Reference RX 6800  |  WD Black SN750 1TB NVMe  |  Corsair RM750  |  Corsair H115i RGB Pro XT  |  Corsair 4000D  |  Dell S2721DGF  |
 

Fun Rig - AMD Ryzen 5 5600X  |  MSI B550 Tomahawk  |  32GB G.SKILL 3600 CL16 4x8GB |  AMD Reference 6800XT  | Creative Sound Blaster Z  |  WD Black SN850 500GB NVMe  |  WD Black SN750 2TB NVMe  |  WD Blue 1TB SATA SSD  |  Corsair RM850x  |  Corsair H100i RGB Pro XT  |  Corsair 4000D  |  LG 27GP850  |

Link to comment
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...
On 11/28/2020 at 3:36 AM, Lord Vile said:

Easy maths, it’s also not that thick, whenever I’ve moved plates of steel that are built well enough to hold a person without bending they’ve been around that thick. 
 

Or they just made the box and stuck a veneer onto it? 

Looks like I was right..

 

 

 

 

CPU: Ryzen 9 5900 Cooler: EVGA CLC280 Motherboard: Gigabyte B550i Pro AX RAM: Kingston Hyper X 32GB 3200mhz

Storage: WD 750 SE 500GB, WD 730 SE 1TB GPU: EVGA RTX 3070 Ti PSU: Corsair SF750 Case: Streacom DA2

Monitor: LG 27GL83B Mouse: Razer Basilisk V2 Keyboard: G.Skill KM780 Cherry MX Red Speakers: Mackie CR5BT

 

MiniPC - Sold for $100 Profit

Spoiler

CPU: Intel i3 4160 Cooler: Integrated Motherboard: Integrated

RAM: G.Skill RipJaws 16GB DDR3 Storage: Transcend MSA370 128GB GPU: Intel 4400 Graphics

PSU: Integrated Case: Shuttle XPC Slim

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

Budget Rig 1 - Sold For $750 Profit

Spoiler

CPU: Intel i5 7600k Cooler: CryOrig H7 Motherboard: MSI Z270 M5

RAM: Crucial LPX 16GB DDR4 Storage: Intel S3510 800GB GPU: Nvidia GTX 980

PSU: Corsair CX650M Case: EVGA DG73

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

OG Gaming Rig - Gone

Spoiler

 

CPU: Intel i5 4690k Cooler: Corsair H100i V2 Motherboard: MSI Z97i AC ITX

RAM: Crucial Ballistix 16GB DDR3 Storage: Kingston Fury 240GB GPU: Asus Strix GTX 970

PSU: Thermaltake TR2 Case: Phanteks Enthoo Evolv ITX

Monitor: Dell P2214H x2 Mouse: Logitech MX Master Keyboard: G.Skill KM780 Cherry MX Red

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×