Posted October 10, 2020 10 hours ago, Ebony Falcon said: Do u have dual monitors ? Some cards enable fans all the fine with dual monitors ffs my ftw3 won’t clock down with dual monitors and sits at 1350 MHz lol Yes I do, but the thing is that my tuf clock down to idle well, but keeps the fan spinning, that makes no sense... Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 15, 2020 No news about this? Not even an update form asus.... Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 16, 2020 Author 18 hours ago, alonsothelion said: No news about this? Not even an update form asus.... Its a new bios available. It has now a 50W threshold and not 30W. I flashed it, and now, Zero-Fan is working Two Monitor connected: Acer Predator XB323UGP 170Hz & AOC AG322QC4 144Hz https://www.asus.com/me-en/Graphics-Cards/TUF-RTX3080-O10G-GAMING/HelpDesk_Download/ Select OS and there is the DL for the new BIOS Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 16, 2020 guys do i need to update both BIOS separately? or a single update will take care of quiet and performance? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 16, 2020 Author I dont know. I was in Quiet and made the update. I undervolted my card anyway. 0.9V @ ~1950MHz @ 240-270W. Ampere is too inefficient for OC. 100W+ for what? 100Mhz? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2020 Yeah, that kinda works, but for example if u make a custom curve with msi afterburner, it lets u to be at 0%? Mine cant do this for example 0% till 50 degrees. Mine stays 31%... 5 hours ago, cl32 said: I dont know. I was in Quiet and made the update. I undervolted my card anyway. 0.9V @ ~1950MHz @ 240-270W. Ampere is too inefficient for OC. 100W+ for what? 100Mhz? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2020 Author I dont use Afterbuner and a custom fan curve. But I tested it with GPUTweak II for U. I can make a custom curve, and the fans are off while idling... Try to reflash the BIOS. Turn off AV if u use one and close all programs. - Flash bios (1) - Let the system reboot - Power off the system - Switch the bios - Reboot - Flash bios (2) - Let the system reboot - Power off the system - Switch the bios - Reboot with bios (1) Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2020 1 hour ago, cl32 said: I dont use Afterbuner and a custom fan curve. But I tested it with GPUTweak II for U. I can make a custom curve, and the fans are off while idling... Try to reflash the BIOS. Turn off AV if u use one and close all programs. - Flash bios (1) - Let the system reboot - Power off the system - Switch the bios - Reboot - Flash bios (2) - Let the system reboot - Power off the system - Switch the bios - Reboot with bios (1) Thank you very much!! I will try with this software and see if it goes well. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 18, 2020 Guys I found an issue with the new BIOS. If you go to afterburner and set a manual fan %, it will not match the value you enter. I set mine for 55% and it goes to 70%. Same thing for the fan curve. It seems there is a mismatch between the actual speed and the way afterburner (and argus) are reading them! Please test! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 18, 2020 On 10/10/2020 at 5:09 AM, alonsothelion said: But, whats the benefit to have 0db to have fans going to 53% to 0 every 10 sec? i mean, that cant be good, i prefer to have it constantly running than that spikes... I have a full custom fan curve mine was bouncing around in game and would completely turn itself off and then jump to 70%. It was annoying but I found an updated version of X1 and that fixed it. I've got mine set to about 400RPM at the lowest setting I can't hear it so it doesn't make a difference letting it turn completely off. AMD 7950x / Asus Strix B650E / 64GB @ 6000c30 / 2TB Samsung 980 Pro Heatsink 4.0x4 / 7.68TB Samsung PM9A3 / 3.84TB Samsung PM983 / 44TB Synology 1522+ / MSI Gaming Trio 4090 / EVGA G6 1000w /Thermaltake View71 / LG C1 48in OLED Custom water loop EK Vector AM4, D5 pump, Coolstream 420 radiator Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 23, 2020 I have the same problem with my TUF RTX 3070 OC, but there is no BIOS update available for that model on their website. Anyone know when that will be available? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 1, 2020 On 10/17/2020 at 3:44 PM, cl32 said: I dont use Afterbuner and a custom fan curve. But I tested it with GPUTweak II for U. I can make a custom curve, and the fans are off while idling... Try to reflash the BIOS. Turn off AV if u use one and close all programs. - Flash bios (1) - Let the system reboot - Power off the system - Switch the bios - Reboot - Flash bios (2) - Let the system reboot - Power off the system - Switch the bios - Reboot with bios (1) I'm having the same problem, and I got Igame Colorful RTX 3080 vulcan OC after seeing video from linus, the 0 RPM mode doesn't work, and no bios update from them, oh my luck lol the 0 fan actually work with 2 monitor before nvidia new driver I guess(probably), I use 3 monitor for work, the 0 fans now only work when I use only 1 monitor lol Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 1, 2020 So I've been looking into this and I wonder if there's an ambient temp sensor that's preventing it from going 0db? Default fan curve and just web browsing/watching a video - has my GPU at 53% fan speed and 38c When I forced the fan to 0% - the GPU went up to 62c and held there. So maybe there's a sensor where it senses the temp inside the case will be too high for it to go to 0db - just my thoughts. Updated bios and everything. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2020 im having a very similar issue to this, in which my fans wont bloody turn on unless the cards over 55C, even with manual fan control on AB and on GPU Tweak 2 I cannot figure it out Here is my post on reddit and i have the 3060 Ti TUF Gaming gpu My issue is the opposite, i dont want 0DB fans, i like my fan curves, but my fans wont turn on through any manual fan control software, they just sit at 35% and going on and off if i try to use afterburner, and 0DB fan set to "off" on GPU Tweak II does nothing, they still turn off. anyone know a fix yet? https://gyazo.com/49f86fb11cb7e61671108d3d5ed6cfed https://www.reddit.com/r/ASUS/comments/ka0vvo/3060_ti_tuf_fan_control_issue/ Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 15, 2020 ASUS just released (2020/12/14) new BIOS for a lot of 30XX cards. -Further optimize the performance for 0dB fan feature -Fixed motherboard “beeping” bug during computer start-up It has solved 53% fan problem for my 3070 ROG STRIX after updating BIOS, DDU delete and clean driver reinstall. Link for 3080 TUF as for this thread https://www.asus.com/me-en/Graphics-Cards/TUF-RTX3080-O10G-GAMING/HelpDesk_BIOS/ Other cards could be found under Find another model link. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 15, 2020 edit : didn't see post above - that's probably the fix - The direction tells you... the direction. -Scott Manley, 2021 Softwares used: Corsair Link (Anime Edition) MSI Afterburner OpenRGB Lively Wallpaper OBS Studio Shutter Encoder Avidemux FSResizer Audacity VLC WMP GIMP HWiNFO64 Paint 3D Paint GitHub Desktop Superposition Prime95 Aida64 GPUZ CPUZ Generic Logviewer Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 15, 2020 5 hours ago, Holair said: ASUS just released (2020/12/14) new BIOS for a lot of 30XX cards. -Further optimize the performance for 0dB fan feature -Fixed motherboard “beeping” bug during computer start-up It has solved 53% fan problem for my 3070 ROG STRIX after updating BIOS, DDU delete and clean driver reinstall. Link for 3080 TUF as for this thread https://www.asus.com/me-en/Graphics-Cards/TUF-RTX3080-O10G-GAMING/HelpDesk_BIOS/ Other cards could be found under Find another model link. im wondering u have to download this separate from the nvidia driver? i just got my 3080 tuf installed this morning and downloaded nvidia drivers but none from the asus website so i was wondering how would you install this Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 15, 2020 42 minutes ago, Brandon9997 said: im wondering u have to download this separate from the nvidia driver? i just got my 3080 tuf installed this morning and downloaded nvidia drivers but none from the asus website so i was wondering how would you install this Yeah, download BIOS update from ASUS and just launch exe from archive. It's fully automated. Next delete your current driver with DDU, restart PC and install Nvidia driver as usual. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 15, 2020 2 minutes ago, Holair said: Yeah, download BIOS update from ASUS and just launch exe from archive. It's fully automated. Next delete your current driver with DDU, restart PC and install Nvidia driver as usual. is DDu after installing the BIOS update required? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 15, 2020 18 minutes ago, Brandon9997 said: is DDu after installing the BIOS update required? I haven't checked if it's 100% required. Maybe not. But a lot of flashing gurus always recommend clean driver install after any VGA BIOS flash. You can clean install via GeForce Experience or standalone Nvidia driver, I used DDU just to make sure everything from old driver is deleted. It might work without it if DDU is any kind of trouble for you. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 22, 2021 for those wondering about the 0db feature, consider this https://www.asus.com/support/FAQ/1044879/ Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
.thumb.jpeg.9babd505c85c11addf31a285a02547cc.jpeg)
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now