Jump to content

Low gpu usage low cpu usage low fps

Kbadri10

Ive been struggling to know why my fps in games is low since my pc build Until I started monitoring gpu usage so for example while playing apex legends and when in the lobby the gpu usage is 92% and cpu is fine at 40% to 60% but when i launch a public match the gpu usage drop to 50s and 60s % and precisly when i look at a heavily built area with tall buildings it drops to 50% and the fps lower significantly which should not happen when looking at my specs and i see people have same specs in benchmarks looking at the same area with a double of my fps and 90% + gpu usage . and btw not only in apex in many other games like fortnite etc ..
I really need to know whats causing this issue
Specs:
CPU: Amd Ryzen 2700
Ram: Crucial Ballistix 1*16 ddr4 3000 mhz
Gpu: Kfa2 Rtx 2060 super
Mobo: A320M-A PRO MAX
PSU:Corsair VS650
SSD:500 gb WD green (where i installed apex)

HDD: 1 tb WD blue
spacer.png

Link to comment
Share on other sites

Link to post
Share on other sites

Ryzen REALLY,..and I mean REALLY REALLY REALLY Prefers DualChannel Ram, you are leaving stock performance on the table by not using DualChannel Memory configurations on Ryzen Processors.

1x16GB vs 2x16GB (Single vs Dual) can introduce uplifts in the 30-50% range in some titles... just from the second stick of memory.
I highly suggest grabbing another stick to create a dual-channel configuration.

Feel free to YT "Ryzen Single VS Dual RAM"

Maximums - Asus Z97-K /w i5 4690 Bclk @106.9Mhz * x39 = 4.17Ghz, 8GB of 2600Mhz DDR3,.. Gigabyte GTX970 G1-Gaming @ 1550Mhz

 

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, Kbadri10 said:

Ive been struggling to know why my fps in games is low since my pc build Until I started monitoring gpu usage so for example while playing apex legends and when in the lobby the gpu usage is 92% and cpu is fine at 40% to 60% but when i launch a public match the gpu usage drop to 50s and 60s % and precisly when i look at a heavily built area with tall buildings it drops to 50% and the fps lower significantly which should not happen when looking at my specs and i see people have same specs in benchmarks looking at the same area with a double of my fps and 90% + gpu usage . and btw not only in apex in many other games like fortnite etc ..
I really need to know whats causing this issue
Specs:
CPU: Amd Ryzen 2700
Ram: Crucial Ballistix 1*16 ddr4 3000 mhz
Gpu: Kfa2 Rtx 2060 super
Mobo: A320M-A PRO MAX
PSU:Corsair VS650
SSD:500 gb WD green (where i installed apex)

HDD: 1 tb WD blue

 

You are using a SINGLE 16GB stick of RAM, rather than in dual channel.

That will have an impact on Ryzen CPUs.

 

A320 board with a weak 3-phase VRM, and no passive/heatsink cooling.

If the VRMs on the motherboard is thermal throttling, then that will kill CPU performance.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

I yt what u told me and luckily i found someone comparing apex with single channel vs dual and really meh there is no much of a difference like 5 fps or 10 at max and the gpu load is at 99 % or 100 the whole time even with single channel 

Soo. i dont think its the problem

Link to comment
Share on other sites

Link to post
Share on other sites

A320+2700 = fail.

Single channel ram = fail

 

Do you have VSync on?  VSync without adpative sync monitor can only give you 15, 30, or 60 FPS on a 60hz monitor.  If it cant hold 60 FPS, it drops to 30 even if you can maintain say 50 FPS.  VSync + the other system build problems would make for a lot of bad performance.

Link to comment
Share on other sites

Link to post
Share on other sites

31 minutes ago, Kbadri10 said:

I yt what u told me and luckily i found someone comparing apex with single channel vs dual and really meh there is no much of a difference like 5 fps or 10 at max and the gpu load is at 99 % or 100 the whole time even with single channel 

Soo. i dont think its the problem

Be mindful YT'ers don't have your exact HW config either...
It could be VRMs throttling the CPU a bit if they can't keep up with your 2700, 3Phase, I'd only use a 65w Chip Max, and you have, but it uses more than 65w under load (in use above base clock)

 

The usage drops could be VRM based throttling,...moreso than the Singlechannel RAM, but the RAM came to mind first.

Maximums - Asus Z97-K /w i5 4690 Bclk @106.9Mhz * x39 = 4.17Ghz, 8GB of 2600Mhz DDR3,.. Gigabyte GTX970 G1-Gaming @ 1550Mhz

 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, KarathKasun said:

A320+2700 = fail.

Single channel ram = fail

 

Do you have VSync on?  VSync without adpative sync monitor can only give you 15, 30, or 60 FPS on a 60hz monitor.  If it cant hold 60 FPS, it drops to 30 even if you can maintain say 50 FPS.  VSync + the other system build problems would make for a lot of bad performance.

No i disabled All vsync related stuff i have only gsync enabled and i tried to disable gsync no difference so i kept it on 

And im planning to change to dual channel but i think a320 with 2700 is fine

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, SkilledRebuilds said:

Be mindful YT'ers don't have your exact HW config either...
It could be VRMs throttling the CPU a bit if they can't keep up with your 2700, 3Phase, I'd only use a 65w Chip Max, and you have, but it uses more than 65w under load (in use above base clock)


 

Ok im planning to upgrade to dual channel ill try it and i will see if it makes a difference

and indeed i noticed in some games in ytb benchmark gpu usage in single channel ram is 50 and dual channel is like 99 Thx 

Link to comment
Share on other sites

Link to post
Share on other sites

Have you only one memory module? If so, this is surely a big problem to keep high gpu usage (up to 30% less GPU usage than usually it's expected and also severe spikes and microstuttering). Duall Channel is absolutely necessary for gaming, specially on VGA cards like RTX2060.

 

Not only that. This motherboard doesnt have any VRM heatsink and maybe its making Ryzen 2700 descrease performance.  So maybe it's happening to you, which is not too much expected on medium load on CPU, only on something close to full load.


What resolution that you're playing? 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×