Jump to content

100%+ GPU usage with fresh install of windows 10

I've been using windows 7 for a while now, and a few days ago i started dropping frames for no reason at all. After googling for a few hours I became convinced I had a "GPU miner" on my pc, I tried to fix it manually with scans and basic digging around my folders but nothing worked and my fps continued to get worse. Once i reached the point of feeling like this was unsolvable I finally broke down and installed windows 10 assuming if there we're any problems they would be gone with a clean install. (no I didn't "upgrade" I performed a clean installation and even formatted my SSD via windows installer.) Needless to say the issue still persists and has even escalated in severity... If anyone is willing to offer me some help on this matter it would mean a lot, my computer is my life and i simply can't afford to replace it.

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

So fresh install of a legitimate copy of Windows 10, on a cleanly formatted SSD and the GPU still sits at 100% usage in 2D desktop mode (core clock maxed, etc).

 

What is your PC specs? 

 

You can go to userbenchmark.com and do a bench and link what the results are - need to rule out bad sensor (and to do this, I need you to monitor temps with HWMonitor or MSI afterburner so we can also know its not thermal throttling).

 

 

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
Share on other sites

Link to post
Share on other sites

Hi thanks for the speedy response, sorry for the lack of info I was trying to avoid generalized answers. I seem to be performing fine in 2d desktop mode but literally everything else that access's my GPU (including my browser and video players) forces it to spike and I receive immense lag in my games that were running fine a couple days ago.

I have been running MSI Afterburner and during heavy load I have been running at 65c, my CPU runs a little hotter but has remained under 85c so far so it doesn't concern me either. However my gpu clock speed has been jumping from 400mhz to over 1700mhz (base clock is 1250mhz and boost clock is 1500mhz) this is when i notice lag spikes in my games.

My specs are as follows
CPU- i5-3470 @3.4ghz
GPU-GeForce 1030 GT 2GB GDDR5
RAM-8GB @1600mhz

SSD-500GB

PSU-750w

If you still feel i should run a benchmark please let me know, and feel free to ask for more info.

 

EDIT: I should add that while monitoring my games with MSI Afterburner i receive no fluctuation in "FPS" but my screen is showing otherwise.

Link to comment
Share on other sites

Link to post
Share on other sites

I managed to update Windows via "Windows Update Assistant" from Microsoft's website, I've ran a 3rd benchmark with my updated OS that I will post below. I am still experiencing the same issues as above though, I do not think its Windows 10 being more demanding than Windows 7 as what I'm seeing is the exact same as it was before. There doesn't appear to be any clear culprits in my task manager, and everything is reporting fine but there's still a very noticeable amount of lag.

 

Primarily I've been playing Dead By Daylight and Dauntless, I always have Discord open and would normally watch Twitch while playing DBD (this would cause a slight amount of frame drops) but not while running Dauntless. 

 

DBD I've had to run in the lowest settings since I got it and since this problem started it has been performing as though my browser we're open all the time with quick spikes slightly worse than that. I bought this game in September 2019 and it has ran acceptably until now.

 

Dauntless on the other hand has been giving me an unstable 40fps but reporting 59-60 in MSI after burner, I also had to run this game in the lowest settings to achieve desired fps but since this issue started i haven't seen anything smooth during game play.This is a free game and I started playing it in December 2019 this too was running acceptably until now.

 

I have also purchased Human Fall Flat after these problems arose and it will start degrading in performance relatively quick, which I find odd as I believe it to be the least demanding. I didn't play this before the lag but I know this shouldn't be happening as my younger brother can run it fine with his GeForce 710 (the bad one!) and a 1st gen intel cpu.

 

I reinstalled Left 4 Dead 2 which I used to run before I upgraded my PC in (almost) max settings with next to no issues, it is now experience a tiny amount of lag. My old PC had an i3-2100 @3.1ghz, a GeForce 210 1gb and 4gb ram @1300mhz. I can't associate this lag to the issue as I didn't play this before it started. 

 

Overall my PC is performing worse than it was and has been since before I switched to Windows 10 and persist with the same intensity now that I do have Windows 10. The Benchmarks I've taken are all reporting fine and I have none from before the issue to compare them with but this issue wasn't present mere days ago and still exists now while attempting to do most anything I've done. If there's anything else I can do to fix this or at least properly identify it I still need help. 

 

https://www.userbenchmark.com/UserRun/24158136

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×