Jump to content

M.2 to regular PCIe slot card on Z77 board?

Kitsan
Go to solution Solved by Levent,
Just now, remus243 said:

Hmm I was actually hoping to use it as the boot drive, what would I need to do?

Take a look at this.

https://www.win-raid.com/t871f50-Guide-How-to-get-full-NVMe-support-for-all-Systems-with-an-AMI-UEFI-BIOS.html

Might be a stupid question but I was wondering if I put an m.2 mounted 960 evo on an adapter card like this:

1564584422_IMG_1227080.jpg.5f5ef5c833c01c49afdc6841f67b9e71.jpg

On my Z77 Asus Formula, will it work normally?

I'm unsure if the older boards like this will have a controller which will work with an NVMe drive like this

Monitor: Alienware AW2518HF CPU: 9900K @ 5.1GHz Heatsink: 2x360MM Custom Loop GPU: MSI GeForce RTX 2080 Ti GAMING X TRIO RAM: Patriot Viper Steel DDR4 2x8GB 4400Mhz Mobo: Asus Maximus XI Gene Case: Fractal Design Meshify S2 PSU: Corsair RM1000x Storage: Seagate Firecuda 510 2TB M.2, Adata XPG SX8200 PRO 256GB M.2
Link to comment
Share on other sites

Link to post
Share on other sites

it might work (I would wait for someone else to confirm) however you wont be able to use it as a boot device without modifying your BIOS.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!dId i WiN teH SiLiCON LotTerrYyOu ShoUlD dEsHrOuD uR GPUmy SYstEm iS UNDerPerforMiNg iN WarzONEcan mY Pc Run WiNdOwS 11 ?woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Levent said:

it might work (I would wait for someone else to confirm) however you wont be able to use it as a boot device without modifying your BIOS.

Hmm I was actually hoping to use it as the boot drive, what would I need to do?

Monitor: Alienware AW2518HF CPU: 9900K @ 5.1GHz Heatsink: 2x360MM Custom Loop GPU: MSI GeForce RTX 2080 Ti GAMING X TRIO RAM: Patriot Viper Steel DDR4 2x8GB 4400Mhz Mobo: Asus Maximus XI Gene Case: Fractal Design Meshify S2 PSU: Corsair RM1000x Storage: Seagate Firecuda 510 2TB M.2, Adata XPG SX8200 PRO 256GB M.2
Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, remus243 said:

Might be a stupid question but I was wondering if I put an m.2 mounted 960 evo on an adapter card like this:

 

On my Z77 Asus Formula, will it work normally?

I'm unsure if the older boards like this will have a controller which will work with an NVMe drive like this

You can get NVME speeds but as said since it's an older board you most likely will not have the option to configure it as a boot drive, I believe the earlier generation that allowed for it was the Z97 series. Some board manufacture's might have sent out a late BIOS update to allow for it but you will need to check first. 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, remus243 said:

Hmm I was actually hoping to use it as the boot drive, what would I need to do?

Take a look at this.

https://www.win-raid.com/t871f50-Guide-How-to-get-full-NVMe-support-for-all-Systems-with-an-AMI-UEFI-BIOS.html

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!dId i WiN teH SiLiCON LotTerrYyOu ShoUlD dEsHrOuD uR GPUmy SYstEm iS UNDerPerforMiNg iN WarzONEcan mY Pc Run WiNdOwS 11 ?woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, remus243 said:

Hmm I was actually hoping to use it as the boot drive, what would I need to do?

Nvme drives don't get faster boot speeds than regular SATA SSDs, so unless you needed it for a very specific reason, I wouldn't sweat it.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

21 minutes ago, Fasauceome said:

Nvme drives don't get faster boot speeds than regular SATA SSDs, so unless you needed it for a very specific reason, I wouldn't sweat it.

I'm waiting for my Z390 master to be RMA, I should really update my signature but I upgraded to M.2 storage a month or so ago. Currently i'm using my old PC which i've been using for Media and it only has a small 128gb sata ssd. If I can at least get my m.2 storage drive working, i'd be happy.

Monitor: Alienware AW2518HF CPU: 9900K @ 5.1GHz Heatsink: 2x360MM Custom Loop GPU: MSI GeForce RTX 2080 Ti GAMING X TRIO RAM: Patriot Viper Steel DDR4 2x8GB 4400Mhz Mobo: Asus Maximus XI Gene Case: Fractal Design Meshify S2 PSU: Corsair RM1000x Storage: Seagate Firecuda 510 2TB M.2, Adata XPG SX8200 PRO 256GB M.2
Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, remus243 said:

If I can at least get my m.2n storage drive working, i'd be happy.

that would work fine then. If your 128GB SSD has only windows and a handful of programs, just keep using it as the boot SSD and the NVMe drive for any major projects.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×