Jump to content

RAM Stuck at 2133 MHz

Toasty Engineer
 Share
Posted

Specs:
Motherboard: ROG Strix B450-F Gaming
CPU: AMD Ryzen 7 2700x
Memory: Corsair Vengence LXP (DDR4, 16 gigs, 3000 MHz)

After putting my new build together today, I find that my ram is stuck at 2133 MHz. I already tried updating BIOS and changing the base frequency in BIOS to 3000. Everytime I did this, it would bring up an error screen saying my settings have been reset due to an error in booting. I have seen this error online but have yet to find a solution that works. Thanks.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

you need to enable DOCP/XMP otherwise your voltages or timings never change to adjust correctly.

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
33 minutes ago, Skiiwee29 said:

you need to enable DOCP/XMP otherwise your voltages or timings never change to adjust correctly.

Or the RAM he got is way to weak, may it cause the issue?

He should get at least a 3200Mhz as AMD is kinda quirky with low Mhz RAM

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Constantin said:

Or the RAM he got is way to weak, may it cause the issue?

He should get at least a 3200Mhz as AMD is kinda quirky with low Mhz RAM

maybe, but the way his post is written makes it sound like he just changed the speed and not actually enabled DOCP/XMP so none of the voltages or timings were adjusted accordingly.

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Skiiwee29 said:

maybe, but the way his post is written makes it sound like he just changed the speed and not actually enabled DOCP/XMP so none of the voltages or timings were adjusted accordingly.

Yes that is the first step to do.

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
14 hours ago, Skiiwee29 said:

you need to enable DOCP/XMP otherwise your voltages or timings never change to adjust correctly.

I tried this. When I set it to DOCP Standard it auto set frequency to 3000, which resulted in the aforementioned boot error. Setting DOCP Standard and setting the frequency to auto also resulted in a failed boot.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×