Jump to content

Monitor going black and GPU fans go to 100%?

lukeav

While i’m playing games my monitor will randomly go black and say no signal but i can still hear audio. A few seconds later the GPU fans will speed up to 100% and i have to restart my pc to be able to stop them/see the screen again. i am not overclocking by the way.

 

I have tried 4 things so far

Checked all cables to make sure nothing is loose.

Clean install of GPU drivers

Checked temps, CPU temps are normal and GPU never went above 62°C

Looked at event viewer and saw Kernel power 41 “The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.” I think that’s just from me holding down the power button to shut it off though.

 

I have not done a memtest like i’ve seen other people with this issue suggest. Should i try that?

Also saw a few people that had the same issue open their card up and see almost no thermal paste on the chip. My temps are fine so i don’t know if that could be the problem but would it be worth trying that?

 

Thank you for any suggestions.

Specs

CPU - R5 2600 (stock cooler)

Motherboard- MSI B450 Gaming Plus

Ram - Corsair vengeance 3000mhz 2x8 gb

256gb ssd and 1tb hdd

GPU - MSI Gaming X RX580 8gb

PSU - EVGA 600w 

Link to comment
Share on other sites

Link to post
Share on other sites

Do some stress testin to figure out what is causing it. Download aida64 extreme and memtest. Try the memtest first. Then stress only your ram in the aida64 extreme while you have hwinfo open to see temps. If nothing on memory, stress storage, tehn stress cpu, fpu, and finally your gpu.

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to comment
Share on other sites

Link to post
Share on other sites

On 12/8/2019 at 2:35 PM, SavageNeo said:

Do some stress testin to figure out what is causing it. Download aida64 extreme and memtest. Try the memtest first. Then stress only your ram in the aida64 extreme while you have hwinfo open to see temps. If nothing on memory, stress storage, tehn stress cpu, fpu, and finally your gpu.

sorry i just finished all the tests. it only crashed when i did the gpu test

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×