IBM Server system X3650 m2 - No POST/video

[Kadok]

Hello People,

I had this server for a long time when we moved to our new house i put it in storage remove the HDD/SSD (i don't have the original SSD/HDD) any more everything worked fine before,

few months later wanted to use it again for a school project been trying for few weeks to get some kind of a post or video out of that thing without success,

It turns on all the fans run and slow down at some point,all light blink green or stay green.

hope you guys can help me further
 

System information

1. IBM System X3650 M2
2. 2x XEON X5570 2,93GHZ
3. 24GB of ram  6x 4gb IBM pc3 - 10600R
4. MT 7947
5. Model 96G
6. P-ID 794796G
7. MFG date 2010-2-26

i can't tell what bios version is on it

it use to run with vmware esxi the original drive i don't have anymore

 

 

What have you tried?

• i remove everything that is not used (like external cards network adapters etc) no post/video
• all cables are in the right place that they should be fully original as it came  no post/video
• tried switch ram modules around running it with 1 ram module swap that around no post/video
• running it with 1 power supply or 2 no post/video switch them around no post/video
• Also got no access to IMM
• no fault codes on power supplies
• no fault codes on LPD only - -   or 1.2  if believe that is normal  1.2 with 1 ram module 
• Video port front or in the back no output (no signal)
• tried 3 different monitors from lcd panel the the old school stuff switch monitor cables a lot no post/video

PS i added a blank SSD noting on. it get a error code if i remove it no drive detected

i came to a point that i dont know anymore hope anyone can send me in the right direction

if you need anymore information please let me know.