Jump to content

Devices in PCIe slot 2 not being detected 

Insprill
Go to solution Solved by Swes,

Try removing everything and add a card to the 2nd slot only and see if you can pull picture out of it then try again with 2 cards and no capture card then finally ad the capture card.

 

Also reset CMOS....

Hello! After a CPU upgrade, any device that i plug into the 2nd PCIe slot isn't detected. I have graphics card in the first 2 slots, and a capture card in the 3rd. I removed the capture card thinking it might be the amount of PCIe lanes, but the gpu still wasn't detected. If you guys could help that would be great!

 

Specs:

-i7 7700k

-Gigabyte GA-Z170SLI rev 1

-2x 1070ti

-elgato 4k60 pro

 

Link to comment
Share on other sites

Link to post
Share on other sites

Is it still forcing your first graphics card to run in 8x mode?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Try removing everything and add a card to the 2nd slot only and see if you can pull picture out of it then try again with 2 cards and no capture card then finally ad the capture card.

 

Also reset CMOS....

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×