Jump to content

Is my 2080 dead?

Topevent
By Topevent
in Graphics Cards
 Share
Posted

I just built a new PC barely a week ago. I just woke up this morning, turned my PC on and my 2080’s fan speeds are instantly at 100%. My monitors aren’t getting any signal at all. The RGB on my card works normally.

 

I have the 2080 Aorus matched with a Z390 Aorus Ultra

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
17 minutes ago, Topevent said:

I just built a new PC barely a week ago. I just woke up this morning, turned my PC on and my 2080’s fan speeds are instantly at 100%. My monitors aren’t getting any signal at all. The RGB on my card works normally.

 

I have the 2080 Aorus matched with a Z390 Aorus Ultra

Shut down system, unplug power from PC. Wait 5 minutes, plug back in, power back up, report back.

NOTE: I no longer frequent this site. If you really need help, PM/DM me and my e.mail will alert me. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Try to do these steps to diagnose your PC.

 

1. Check all cables and wires if all of them are plugged-in correctly.

2. Check your power cables

3. Make sure that your Display port/DVI/HDMI cables are correctly plugged in. try to unplug and plug in again.

4. re-seat your GPU by removing it and inserting again to its PCIE slot.

5. Make sure the PCIE cables for your GPU plugged in correctly. check also at the end to your power supply.

6. Check your monitor's cables if it is plugged in to your power outlet. make sure the cables are not loose.

 

Question, how did you know that your GPU fans spins at 100%, while not looking at your monitor? i believe most of the newer cards from NVIDIA dont spin at all during idle. Did you overclock it? if yes, then you might overdo something during the OC. try to reset your CMOS by removing the battery from your motherboard, then insert it again after 5 seconds. you can also try running your monitor using the HDMI port of your motherboard. if your monitor works, try reseating your GPU to a second PCIE of your motherboard since it has 3 PCIE slots.

Ryzen 5 1600 | Gigabyte GA-AB350M-Gaming 3 | Team Elite TForce Delta RGB 2x8 16GB 3200mhz | Gigabyte GTX 1060 6GB AORUS | Fractal Design Arc Mini R2 | 2 1TB WD Blue | Wester Digital Blue 3D NAND 500GB | SeaSonic M12II 520W 80+ Bronze | CoolerMaster Hyper 212 Led Turbo | ASUS VG248QE | Rakk Kimat XT | Logitech G502 HERO | Massdrop x AKG M220 Pro | V8 Soundcard | BM800 Condenser Mic | Logitech C310

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I don't think the card is dead, something else is going on, do what the guru's said above and report back to us.  good luck

Asus Sabertooth x79 / 4930k @ 4500 @ 1.408v / Gigabyte WF 2080 RTX / Corsair VG 64GB @ 1866 & AX1600i & H115i Pro @ 2x Noctua NF-A14 / Carbide 330r Blackout

Scarlett 2i2 Audio Interface / KRK Rokits 10" / Sennheiser HD 650 / Logitech G Pro Wireless Mouse & G915 Linear & G935 & C920 / SL 88 Grand / Cakewalk / NF-A14 Int P12 Ex
AOC 40" 4k Curved / LG 55" OLED C9 120hz / LaCie Porsche Design 2TB & 500GB / Samsung 950 Pro 500GB / 850 Pro 500GB / Crucial m4 500GB / Asus M.2 Card

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Use the iGPU to get into system, DDU in safe mode, then place the GPU back and reinstall the drivers?

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

had the same issue, startred after 1809 update few days ago, it was solved only after i did clean windows install

the problem started with os build 17763.195

after a fresh install to 17763.107 it was fine

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I had same issues after 1809

just turn on and off a few times till it boots

-13600kf 

- 4000 32gb ram 

-4070ti super duper 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×