Jump to content

160mm cpu fan on 155mm case

Hernani Duarte
By Hernani Duarte
in Cooling
 Share
Posted

Hello i just got hands on brand new Cooler Master Hyper Turbo and im afraid becaise my case it says max cpu cooler 155 mm and heatsink is 160 mm am i ok or im screwd?

Screenshot_20181213-224444.jpg

Screenshot_20181213-224544.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

ok well why dont you put it in and let us know then

we dont have your case and cooler in front of us , we dont know

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'd say you're screwed, but doesnt hurt to try

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, Hernani Duarte said:

Hello i just got hands on brand new Cooler Master Hyper Turbo and im afraid becaise my case it says max cpu cooler 155 mm and heatsink is 160 mm am i ok or im screwd?

Well if you dont mind having the side panel not fully closed

or cut a hole on side panel....

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
35 minutes ago, dgsddfgdfhgs said:

Well if you dont mind having the side panel not fully closed

or cut a hole on side panel....

Its glass panel friend and I saw in the store i got the case it says it can fit up to 160mm height coolers now im kinda confused xD

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
40 minutes ago, Jurrunio said:

I'd say you're screwed, but doesnt hurt to try

Yeap thats true i checked and on the store it says max 160mm height and i was thinking avery tight tight wile tighting the the cooler maybe redice it self maybe an inch or two because the glass panel screws out of the actual frame so maybe thers an adavantage

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Hernani Duarte said:

Yeap thats true i checked and on the store it says max 160mm height and i was thinking avery tight tight wile tighting the the cooler maybe redice it self maybe an inch or two because the glass panel screws out of the actual frame so maybe thers an adavantage

no, a very tight mount from a properly tight mount shall give you less than 1mm of reduced height.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
46 minutes ago, emosun said:

ok well why dont you put it in and let us know then

we dont have your case and cooler in front of us , we dont know

I was just asking maybe some one got the same problem before just saying and know if fits or no but shure after i get everything ready i let you guys know

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Jurrunio said:

no, a very tight mount from a properly tight mount shall give you less than 1mm of reduced height.

Yea your right :/ the glass panel actualy scews of the frame not even is inside the case so maybe bonus there 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×