[RESOLVED] I tried to build RAID0 in my new Mobo but it is not accept the drive.

[abu abdalah]

Dears,

               "Firest i am so sorry English is not my laguage, but i will try my best to explaine my issue :)"

 

      Please I need your advice to enable RAID 0 with my new motherboard ASUS X-99 DELUXE and 2x SSD 256,

with my old PC it is working fine, but after upgrading my PC i enters the UFEI Bios and enabled the RAPID and made the RAID by wizerd, after that i booted windows 8.1 to install it but it is give me this error :

 

 

I know i did small mistack but i don't know what is it?

Note**

I connected the drives to these ports:

 

 

Please need your support and adivice.

 

Thanks and best regards.

[zeibis]

From http://www.asus.com/us/Motherboards/X99DELUXE/specifications/

"*3: Due to chipset behavior, The SATA6G_78, SATA6G_910 ports (black) do not support IRST including RAID configuration."

So try a different ports

[NumLock21]

According to that setup screen it's only showing 78GB instead of 256GB. First make sure the SSD are plugged into the Intel controller, your manual should tell you which one is which, next go into bios and set the SATA mode to RAID. Save and Exit bios, Intel rapid storage should appear, enter that wizard and redo raid array. Once it's done boot from CD and install windows.

[abu abdalah]

From http://www.asus.com/us/Motherboards/X99DELUXE/specifications/

"*3: Due to chipset behavior, The SATA6G_78, SATA6G_910 ports (black) do not support IRST including RAID configuration."

So try a different ports

 

Many thanks for you kind replay,

I will try with different ports then  will replay.

thanks

 

According to that setup screen it's only showing 78GB instead of 256GB. First make sure the SSD are plugged into the Intel controller, your manual should tell you which one is which, next go into bios and set the SATA mode to RAID. Save and Exit bios, Intel rapid storage should appear, enter that wizard and redo raid array. Once it's done boot from CD and install windows.

 

Thanks for your kind replay,

 

sorry for that, I only googled this error, here you can find my snap.

 

regarding Intel SATA it shows that my port is Intel port, correct me please if not.:(sorry I couldn't rotate it    )

 

 

 

thanks and best regards.

[NumLock21]

Try booting your Windows disc with UEFI mode.

[abu abdalah]

Try booting your Windows disc with UEFI mode.

 

sorry but how can I do that ? did you mean from BIOS? please forgive me I am noob with this new system.

[NumLock21]

sorry but how can I do that ? did you mean from BIOS? please forgive me I am noob with this new system.

Launch the boot override menu. I beleive that will be F8 when you turn on your computer.

[abu abdalah]

Launch the boot override menu. I beleive that will be F8 when you turn on your computer.

 

I tried it but still same issue,

 

is there are something I need to do before connect the SSD with my old RAID 0,

I mean I had windows 8.1 with RAID 0 setup in (this two SSD), did I need to remove this array before connect it with my new PC?

[NumLock21]

I tried it but still same issue,

 

is there are something I need to do before connect the SSD with my old RAID 0,

I mean I had windows 8.1 with RAID 0 setup in (this two SSD), did I need to remove this array before connect it with my new PC?

 

Was your old raid controller also Intel? If yes, then mostly no, but it's still best to remove the raid array and then rebuild it. Removing the raid array will wipe out all data on it.

[abu abdalah]

Was your old raid controller also Intel? If yes, then mostly no, but it's still best to remove the raid array and then rebuild it. Removing the raid array will wipe out all data on it.

 

no problem I already taken the backup,

Yes it is Intel, how can I delete the old? did I need to connect the two ssd to my old mobo and deleted it from the bios?

Note**

I already formatted the two SSD then I build this new RAID 0, is that will cancel old array?

 

thank you brother for your support.

[NumLock21]

no problem I already taken the backup,

Yes it is Intel, how can I delete the old? did I need to connect the two ssd to my old mobo and deleted it from the bios?

Note**

I already formatted the two SSD then I build this new RAID 0, is that will cancel old array?

 

thank you brother for your support.

Create with the new board using the raid setup wizard. If somehow the wizard says raid is already built, delete it and recreate it.

[abu abdalah]

Create with the new board using the raid setup wizard. If somehow the wizard says raid is already built, delete it and recreate it.

 

I did that but it is still same, do you think the problem with SATA cable? I used the new cables that's comes with the new board.

 

I am so sorry for disturbing you.

[abu abdalah]

Dear

this is my RAID setup maybe you want to have a look:

 

thanks

[NumLock21]

Haven't play around with the RAID setup on my X99 Deluxe yet, but in the past, there used to be a Intel raid wizard. Try this out

http://forums.anandtech.com/showthread.php?t=2399481

[abu abdalah]

I tried all what they suggest but the problem still same.

 

I think I will cancel this RAID, or some one can make me change my mind?

[abu abdalah]

I don't know how but now it is working with me, i think thats after i enable the HOT START for both SSDs.

 

many thanks for every one especially for NumLock21 for his continualy responding to me.