Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Recommended Posts

Posted · Original PosterOP

Greetings, in general I am new to forums this type. I ran into an issue with new setup i just made. 

Problem is after I put new parts into PC (CPU, MoBo, RAM), PC wont boot. It turns up, RGB from MoBo and RAM works, but no boot screen. 

Any help welcome :D


Currently in PC:
CPU Ryzen 7 2700

MoBo Aorus x470 ultra gaming

PSU Chieftec eco series 700

RAM HyperX predator 1x8gb 2933 (currently until new arrive)

Link to post
Share on other sites

So first time you tried to boot it no posted.  So you removed CMOS, and it posted.  Then turned it off and it wont post, so you pulled CMOS and then it posts - rinse repeat - correct?

 

What slot is your single stick of RAM in?  I believe it should be in DDR4_1 slot with only 1 stick available.

 


Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Generic mouse, 37" 1080p TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV for form factor in the kitchen

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
Posted · Original PosterOP

Something like that, but it started when i tried to change RGB Fusion and RAM speed directly from BIOS, as RAM is on 2400Mhz RN, and i tried it with XMP profile 1 on 2933Mhz. After that i save and exit and it didn't post. When i normaly turn down PC and turn it again it starts again, but when i leave it for few minutes, it wont start.

Currently it is working with last CMOS reset, without touching BIOS settings at all.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×