Jump to content

9700k voltage, how do i get it to not peek?

T0MMEN
By T0MMEN
in CPUs, Motherboards, and Memory
 Share
Go to solution Solved by T0MMEN,

I think i might have found a solution, i set the IA DC load line to 0.01

Ill have to do further testing to be sure.

Posted

I have a 9700k on a z370-f mobo. Im using -105 offset with llc 1. I want the voltage to stay beetween 1.312v and 1.328v. But instead it stays at 1.280v when gaming and peeks to 1.360v

How do i set the offset and llc to get the cpu voltage to stay where i want it too ?

i9-9900k 5.0ghz, 16gb Corsair 3600mhz, Asrock phantom itx z390 Mobo, RTX 3060ti, 1TB+1TB Western digital NVME, InWin A1, Noctua NH-U12S

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, imreloadin said:

Blindfold it...

Ive tried, impossible.

i9-9900k 5.0ghz, 16gb Corsair 3600mhz, Asrock phantom itx z390 Mobo, RTX 3060ti, 1TB+1TB Western digital NVME, InWin A1, Noctua NH-U12S

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

dont use so much LLC then, LLC causes voltage to fluctuate a lot.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
6 minutes ago, Jurrunio said:

dont use so much LLC then, LLC causes voltage to fluctuate a lot.

Im trying to use it at Default now with -0.080 offset. Lets see how that goes.

i9-9900k 5.0ghz, 16gb Corsair 3600mhz, Asrock phantom itx z390 Mobo, RTX 3060ti, 1TB+1TB Western digital NVME, InWin A1, Noctua NH-U12S

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Tried to use auto LLC and ran ixtu benchmark, voltage fluctuated from 1.280 - 1.360. How do i get this to a minimum ? I want it to stay between 1.312 and 1.328 under load... Seems to be impossible.

i9-9900k 5.0ghz, 16gb Corsair 3600mhz, Asrock phantom itx z390 Mobo, RTX 3060ti, 1TB+1TB Western digital NVME, InWin A1, Noctua NH-U12S

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, T0MMEN said:

Tried to use auto LLC and ran ixtu benchmark, voltage fluctuated from 1.280 - 1.360. How do i get this to a minimum ? I want it to stay between 1.312 and 1.328 under load... Seems to be impossible.

That happens to me im not sure how to fix it either, i've set my Ryzen voltages to 1.29v max and it runs at 1.333v at full load

(◣_◢) Ryzen 5 3600,   Aorus X370 K7,   XPG 16GB 3200,   Gigabyte 2070 Windforce,   Corsair RM650x,   LG 32GK650F-B 31.5" 144Hz QHD FreeSync VA,   Kingston 120GB SSD,   Samsung 1TB 860 QVO,   2TB HDD,   Fractal Design Meshify C,   Corsair K63 Wireless,   Corsair Gaming M65 PRO,   Audio Technica ATH M50x,   Windows 10 Pro,  Corsair H100x 240mm.  (◣_◢)

(◣_◢) Ryzen 5 1600,   Noctua NH-L12S,   Gigabyte GTX 1060 6G,   ASUS Prime B350 Plus,   HyperX Fury 8GB DDR4 (2666MHz - 1.3v),   SilverStone ET550-B,   Kingston 120GB SSD,   2TB HDD,   Cougar MX330,   Windows 10 Pro.  (◣_◢)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
  • Solution

I think i might have found a solution, i set the IA DC load line to 0.01

Ill have to do further testing to be sure.

i9-9900k 5.0ghz, 16gb Corsair 3600mhz, Asrock phantom itx z390 Mobo, RTX 3060ti, 1TB+1TB Western digital NVME, InWin A1, Noctua NH-U12S

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×