Jump to content

Raijintek Ophion Evo Overview after 1 month of use

I have been using the Ophion Evo as my main travelling system for both my work and studies. 

 

The case frame is pretty solid, it comes with 2 peices of 5mm tempered glass panels and Raijintek sells the 2 pieces of steel plate side panels separately for $20 a piece. I chose to do this piece because there isn't many deep user/overview videos about this case. 

 

Good points 

It's price of $130.00

Light weight and strong for constant travel use. 

Options for side panels between steel or glass. 

Option for SFX or ATX power supply. 

Chamber separation between the GPU and the motherboard and power supply.

Space for full length GPU.

All fan ventilation are covered. 

Space for 240mm AIO liquid cpu cooler 32mm thick with dual 120mm fans. 

Up to 3 2.5mm ssd/hdd/sshd or 2 2.5 ssd and a 3.5 hdd storage. 

 

Bad points

Comes without the steel side panel plates, having to contact Raijintek to purchase them. 

Comes without power supply converter bracket for ATX/SFX converting. 

Comes without any fans. 

May not fit taller GPU models etc. (MSI Armour, PowerColor Red Devil and EVGA FTW3) 

AIO Liquid cooler radiators 34mm or thicker may cause fan propellers blockage. 

Front panel type C io isn't type C standard but USB 3.0 converted. 

Using a full ATX power supply and it's standard cables will be too long for the case and cause a messy look. 

Best Value Build List

Budget 1080p System (RGB) https://pcpartpicker.com/list/7v2Lmq - (this build comes with two free games with the RX 570) 

Link to comment
Share on other sites

Link to post
Share on other sites

My system in the case. 

 

Ryzen R2600 

MSI B450i gaming plus ac 

G. Skill tridentZ 3000mhrz cl 16 RGB

Silverstone Td02 slim (Thermaltake riing trio 12 rgb) 

Corsair SF600 SFX 600w 80+ gold

Zotac GTX 1080 8gb mini. 

Western digital black m.2 nvme 250gb ssd.- Boot drive

Western digital blue 1tb ssd - storage

Thermaltake Riing Trios 120mm RGB Fans. 

Best Value Build List

Budget 1080p System (RGB) https://pcpartpicker.com/list/7v2Lmq - (this build comes with two free games with the RX 570) 

Link to comment
Share on other sites

Link to post
Share on other sites

6 hours ago, Galion said:

Front panel type C i/o isn't type C standard but USB 3.0 converted. 

This means it's just "USB 3.1 gen 1". The Type C standard is only the form factor which doesn't define speeds, much like confusing M.2 being synonymous with NVME.  In fact I think the USB Type C on my Galaxy S8+ is only USB 2.0 standard speeds. 

https://www.usb.org/usbc

7 hours ago, Galion said:

May not fit taller GPU models etc. (MSI Armour, PowerColor Red Devil and EVGA FTW3) 

The strix is a taller card (similar to FTW3) and Raijintek has photos of that fitting with a 240mm RAD. So this might not be an issue. 

https://www.raijintek.com/en/products_detail.php?ProductID=89

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites

Link to post
Share on other sites

6 hours ago, TVwazhere said:

This means it's just "USB 3.1 gen 1". The Type C standard is only the form factor which doesn't define speeds, much like confusing M.2 being synonymous with NVME.  In fact I think the USB Type C on my Galaxy S8+ is only USB 2.0 standard speeds. 

https://www.usb.org/usbc

The strix is a taller card (similar to FTW3) and Raijintek has photos of that fitting with a 240mm RAD. So this might not be an issue. 

https://www.raijintek.com/en/products_detail.php?ProductID=89

 It will fit but the rad will  interfere withe the power cable and may cause damage to the sleeving as I am using custom black cable mod cables I noticed it when I tried out my msi armour version of gpu (rx 580). 

Best Value Build List

Budget 1080p System (RGB) https://pcpartpicker.com/list/7v2Lmq - (this build comes with two free games with the RX 570) 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×