Meganter

Oki 

Ah oki doki 

Hello,
 
Yes it's an upgrade but in 2-3 months new GPUs should be out so unless you can't wait, I'd advise to not buy it right now.

I mean. It's an upgrade. Not one I would go for imo. 
Wait for ampere and big Navi. The 1060 should do for now. 

Well now you know why it's "hot", it takes some air from the GPU (which is hot during gaming too), it doesn't suck fresh air nor exhaust it out directly, this is an example of a badly mounted AIO.

Well now you know why it's "hot", it takes some air from the GPU (which is hot during gaming too), it doesn't suck fresh air nor exhaust it out directly, this is an example of a badly mounted AIO.

Well now you know why it's "hot", it takes some air from the GPU (which is hot during gaming too), it doesn't suck fresh air nor exhaust it out directly, this is an example of a badly mounted AIO.

Hello,
 
I think that's the fan going almost at full speed.

Yeah, I think there is space for the rad at the front too - since he won't need the fans that are currently mounted on the rad.

is that AIO blowing into the PSU shroud, where half the AIO has its airflow path covered by the PSU?
 
meanwhile, where does the air go then? down vents at the bottom after being obstructed by PSU cables?
this isnt ideal, as it really does limit the flow of air through the case. 
 
not too harp to much about the setup. flip the rear/top fans around. and mount the AIO in the front. 
 
this isnt related to the liquid temp, which ive got no reference in regards to its importance, its just advice to make the setup better. 

Well now you know why it's "hot", it takes some air from the GPU (which is hot during gaming too), it doesn't suck fresh air nor exhaust it out directly, this is an example of a badly mounted AIO.

Hello,
 
Monitor your CPU temp while doing a Cinebench R20, if it goes to 95°C in average during it, start to worry, otherwise it's fine.

Hello,
 
Monitor your CPU temp while doing a Cinebench R20, if it goes to 95°C in average during it, start to worry, otherwise it's fine.

It's normal afaik. 

https://uk.pcpartpicker.com/product/dDH48d/corsair-txm-gold-550w-80-gold-certified-semi-modular-atx-power-supply-cp-9020133-na
https://uk.pcpartpicker.com/product/qpvbt6/be-quiet-pure-power-11-cm-500-w-80-gold-certified-semi-modular-atx-power-supply-bn297
https://uk.pcpartpicker.com/product/zBfmP6/bitfenix-formula-gold-550w-80-gold-certified-atx-power-supply-bp-fm550ulag-7r
 
Either of these will be solid options, with the Pure Power 11 probably being the quietest and the Formula being very close to it in terms of noise.

the tx550m is a very good unit, go for it

Have you tried raising your pump speed? As long as your CPU isn't sitting at abnormally high temperatures, it should be fine.
Also, don't check CPU temps with CAM, use HWiNFO64 or Ryzen Master instead.

CPU:
Ryzen 7 3700X
 
RAM: 32GB 4X CMK16GX4M2Z3600C18 @ 3200 MHz
 
Storage:
1TB NVME WD Blue
 
GPUs:
RTX 2080 Super @ x4
RTX 2070 @ x4
GTX 1070 @ x4
GTX 1070 @ x4
GTX 1070 @ x1
RTX 2060 @ x4
RTX 2060 @ x4
 
x1 slot available (Killed my 1060 in this slot, and is currently untested and unused)

 
PSUs:
Corsair HX1000i
EVGA 550GM
 
AIO Cooler:
DeepCool Gammaxx L240T
 
PCI_E0 bifurcation card:
https://riser.maxcloudon.com/en/bifurcated-risers/22-bifurcated-riser-x16-to-4x4-set.html
 
Case:
Thermaltake Level 20 GT
 
Motherboard:
MSI X570-A Pro
 
Updated, 23rd August, 2020.

* locks thread *
 
 
...
 
* throws key down the drain *
 

I'm actually face palming

@Den-Fi
@TofuHaroto
 
'grats

LOCK
lock
LOCK
lock
LOCK!
 

(┛✧Д✧))┛彡┻━┻

DONT GET IT LOCKED AGAIN GOT DAMNIT

This isnt the Car thread, you cant use the C word in other topics