Troyanac

Vishera will never be forgotten, as _that_ 8 core chip

This is what i call an ridiculously awsome motherboard!

Locked.

So i hate WiFi when it does not work or it works but my ping is 300+ ms, so i needed a solution. I have 2 D-Link DWL-2100AP's, but due to D-Links broken firmware IP routing, i just could not get it working like it should. Always network unreachable.

My Network goes like this :

AirLive WL-1500R -----------WiFi--------> DWL-2100AP (Client (WDS)) ----------Cable-------> DWL-2100AP (AP) ---------WiFi---------> Laptopt

But the wired link between the two just did not work. So, i grabbed my soldering iron and soldered 3 wires to my router and poked them in my Arduino. Inserted a 1k resistor to keep the ATMega off and started to do witchery with the serial console, just some reverse engineering and stuff. After 2 long hours i finnaly managed to get RedBoot running via a TFTP Server on my other laptop. After that i formated the router flash memory and made a roofs and linux image on it, and flashed OpenWRT Atheros with the TFTP Server and Serial console. And, voila! Linux on my router! 

After some Linux routing magic, my WiFi finnaly works in my room!



First boot after image flash


 
OpenWRT with Linux 2.6.30.10


 

 
The white knight! 

The greatest.

*sniffs* that was beautiful

So i hate WiFi when it does not work or it works but my ping is 300+ ms, so i needed a solution. I have 2 D-Link DWL-2100AP's, but due to D-Links broken firmware IP routing, i just could not get it working like it should. Always network unreachable.

My Network goes like this :

AirLive WL-1500R -----------WiFi--------> DWL-2100AP (Client (WDS)) ----------Cable-------> DWL-2100AP (AP) ---------WiFi---------> Laptopt

But the wired link between the two just did not work. So, i grabbed my soldering iron and soldered 3 wires to my router and poked them in my Arduino. Inserted a 1k resistor to keep the ATMega off and started to do witchery with the serial console, just some reverse engineering and stuff. After 2 long hours i finnaly managed to get RedBoot running via a TFTP Server on my other laptop. After that i formated the router flash memory and made a roofs and linux image on it, and flashed OpenWRT Atheros with the TFTP Server and Serial console. And, voila! Linux on my router! 

After some Linux routing magic, my WiFi finnaly works in my room!



First boot after image flash


 
OpenWRT with Linux 2.6.30.10


 

 
The white knight! 

So i hate WiFi when it does not work or it works but my ping is 300+ ms, so i needed a solution. I have 2 D-Link DWL-2100AP's, but due to D-Links broken firmware IP routing, i just could not get it working like it should. Always network unreachable.

My Network goes like this :

AirLive WL-1500R -----------WiFi--------> DWL-2100AP (Client (WDS)) ----------Cable-------> DWL-2100AP (AP) ---------WiFi---------> Laptopt

But the wired link between the two just did not work. So, i grabbed my soldering iron and soldered 3 wires to my router and poked them in my Arduino. Inserted a 1k resistor to keep the ATMega off and started to do witchery with the serial console, just some reverse engineering and stuff. After 2 long hours i finnaly managed to get RedBoot running via a TFTP Server on my other laptop. After that i formated the router flash memory and made a roofs and linux image on it, and flashed OpenWRT Atheros with the TFTP Server and Serial console. And, voila! Linux on my router! 

After some Linux routing magic, my WiFi finnaly works in my room!



First boot after image flash


 
OpenWRT with Linux 2.6.30.10


 

 
The white knight! 

So i hate WiFi when it does not work or it works but my ping is 300+ ms, so i needed a solution. I have 2 D-Link DWL-2100AP's, but due to D-Links broken firmware IP routing, i just could not get it working like it should. Always network unreachable.

My Network goes like this :

AirLive WL-1500R -----------WiFi--------> DWL-2100AP (Client (WDS)) ----------Cable-------> DWL-2100AP (AP) ---------WiFi---------> Laptopt

But the wired link between the two just did not work. So, i grabbed my soldering iron and soldered 3 wires to my router and poked them in my Arduino. Inserted a 1k resistor to keep the ATMega off and started to do witchery with the serial console, just some reverse engineering and stuff. After 2 long hours i finnaly managed to get RedBoot running via a TFTP Server on my other laptop. After that i formated the router flash memory and made a roofs and linux image on it, and flashed OpenWRT Atheros with the TFTP Server and Serial console. And, voila! Linux on my router! 

After some Linux routing magic, my WiFi finnaly works in my room!



First boot after image flash


 
OpenWRT with Linux 2.6.30.10


 

 
The white knight! 

Sitting near my front door going 
"Fuuuuuuuuuuuuuuuuuuuuuuuuck oooooooooooooooooooooooooooff"
Whenever some kids start knocking on it.

Okay... I listened to this for 30 seconds.
I need at least 30 hours of heavy metal to get that shit out of my brain.

I was going on about to heat my room with a PC, but nothing without a quad crossfire is even close to a heater.

I fucking hate the Verizon branding.

Just need a decent accelerated display output. I am running a Windows VM inside Linux, so i run 2 operating systems at once on my PC on 2 monitors, because i can no live without both. Currently i use 2 laptops for that.
 

I thought you were mad at some A6 APU

I thought you were mad at some A6 APU

I fucking hate the Verizon branding.

I fucking hate the Verizon branding.

I fucking hate the Verizon branding.

Seems a bit overkill for a LAN server?
Tho, if you want to run the server on your rig on which you play, assure you can SWAP memory to the SSD, so make a SWAP partition beforehand when installing your Linux OS on your server.
Then virtualize Windows so it can run the games. 
Do NOT run Windows as the game server.

Yes, my name on it and the "Welcome to Yahoo!" has been sent last night.