S2000Gan

Id like to note the igpu is on the CPU not the z170 motherboard

Im testing this out on a system consisting of: i5 6600k Asus Z170 Deluxe 16GB DDR4 GTX 770 GTX 970 three 3TB hard drives one as the cache and 2 as the array I tried doing it on a i5 2400 and a Asus Z68 Maximus IV Gene-z but I found that even though the chip supports VT-D it seems like only Q series, X series and Z170 support VT-D Im trying to create a aVM but im getting this error after enabling the ACS override because both GPUs are on the same group, it seems like only X series boards have ACS, not sure about Q series. Not sure where to go from here. internal error: early end of file from monitor: possible problem: 2015-10-25T18:46:30.182775Z qemu-system-x86_64: -device vfio-pci,host=00:1f.3,bus=root.1,addr=01.0: vfio: error, group 9 is not viable, please ensure all devices within the iommu_group are bound to their vfio bus driver. 2015-10-25T18:46:30.182808Z qemu-system-x86_64: -device vfio-pci,host=00:1f.3,bus=root.1,addr=01.0: vfio: failed to get group 9 2015-10-25T18:46:30.182823Z qemu-system-x86_64: -device vfio-pci,host=00:1f.3,bus=root.1,addr=01.0: Device initialization failed 2015-10-25T18:46:30.182837Z qemu-system-x86_64: -device vfio-pci,host=00:1f.3,bus=root.1,addr=01.0: Device 'vfio-pci' could not be initialized EDIT: I figured out that it was getting this error from me trying to give the VM the onboard audio, is there any way for me to give one of the VMs the onboard aubdio? Im also wondering if it is possible to have the VMs be able to have new USB devices plugged in without allocating them on the VM creation page. Do the mouse and keyboards I have plugged in have to stay in the exact same USB ports they are currently in? EDIT2: Why is CrystalDiskMark reporting 1.8-2.4GB/s read speed from my VMs when i only have one of them running? I only have a 2 drive array and 1 drive cache. All are HDD not SSD. This doesnt seem right at all. I dont think I even have my cache setup properly. Because I dont have SSDs I put my vdisks share on the array and whether I have use cache disk set to yes or no I get these crazy speeds in CrystalDiskMark. But when I have both VMs on then CrystalDiskMark reports 50-100MB/s read speed. Both the read speed im getting when using only one VM and the speed im getting when using both VMs seems to be unaffected by switching the use cache disk option. Far as I can tell the only difference is when only one VM is on the CPU utilization in the UnRaid Dashboard is lower and when both VMs are on and I try running a CrystalDiskMark run its at 99% Also the test takes alot longer just to start when both VMs are on. When I run CrystalDiskMarkon both VMs at the same time they report only about 25MB/s each.

Where is the power button on the ML08??? :huh: I see it in the corner on the RVZ02 but nothing on the ML08 :blink: EDIT: Nvm, found it, http://www.silverstonetek.com/downloads/Manual/case/Multi-ML08-Manual.pdf it's under the sliding Front IO cover, sneaky bastards.

Virtual Shot seems cool

I didnt get the notification email for this stream either, and I just checked, still have notifications turned on.

Awesome! And WOW that was fast!

Congrats on 1M! I'll should try to be more active on the forums like I used to be on other forums when I was younger!

weird to think pins x9-x16 are causing the card to not display any video out. Im not going to do this, but I wonder if covering pins x9-x16 with electrical tape and plugging the card into the top PCIe slot would make it work. I dont think I can RMA a 7 year old nvidia branded 8600 gts

So a system I built for a friend a while back isnt displaying video out on the 8600GTS I transplanted from their old system. HOWEVER, when I move the graphics card to the other PCIex16 slot (electrically x8 I believe) on the motherboard it works. WHAT MORE! When I put a different graphics card into the top PCIe slot it works fine. Anyone know whats going on? UPDATE: Just put the video card in a different computer and it's the same story, doesnt work in the top PCIe slot but it works in the lower one. Dying but not dead card?

Should make a poll: Shield Tablet + Controller vs Shield Handheld

http://www.totalxbox.com/78048/halo-the-master-chief-collection-pc-port-isnt-impossible/ I think this would be a great way for Microsoft to gain market share of PC gamers, and especially retain the ones who like me have switched from xbox to PC.

Cool Ideas, but how is there any profit in either of these? As it is I barely see how the tech videos are profitable.

I dont see how remote desktop relates to fetching a file from a computer on an external network.

Again, I use it when I'm mostly using the touch screen on my ultrabook, when I'm using my wireless mouse I go back to using chrome like on my desktop.

Looks like its working now! Thanks! I wonder how many people who posted in here have actually tried IE11, specifically on a touchscreen. Chrome doesn't have forward back page swiping or pinch zoom. It has pinch zoom on the touchpad but not on the touchscreen. My main complaints with IE are things that most people probably wouldn't even notice, user interface efficiency things.

Ive started using IE on my ultrabook due to Chrome not being as touch friendly, and i noticed the quote button doesnt work.

http://knowyourmeme.com/memes/events/diretide

sigh needmorewood... Anyway, I hope Ducky makes an RGB Mech board!

Maybe I should have put this in the news section...

I just got a new ultrabook with 8.1 and I noticed you cant fetch files from computers running 8.1! Did some searching and found this AMA http://www.reddit.com/r/IAmA/comments/1jcypj/i_am_omar_shahine_and_mona_akmal_with_the/cbdg4gv I really hope they bring "Fetch" back to 8.1

What's low quality about it? I managed to wear much of the paint off the WASD keys on my X6 after a few years of use, and me honestly not taking care of it very well (not washing my hands when oily). I try to take much better care of my current keyboard. So maybe the paint isnt great, but I dont see what else there is to complain about

What's wrong with MS' keyboards? I've used both the X4 and X6 and aside from being non mechanical theyre just as good as any other membrane keyboard. The X6 even has macros and an auto run key!

Yeay!

If you actually need it for some ridiculous reason maybe paint the faceplate black?

sigh...