Question On Coolant

[Snyder]

A few things, first a big thanks to multiple threads on this forum to help me build my first computer ever! Secondly im still not as experienced within the world of computers so any tips/ comments would be much appreciated! Lastly the question about my cpu coolant is that i made a custom loop and I have a gallon of di water mixed with a concentrate from primo chill however after running my computer for a week or two my coolant lost its color and is now a clear slightly cloudy color. My thermals are fine im running 4.8 ghz on a 8700k running around 30 degrees c on almost no load and i think it was 60 degrees or 70 degrees under a stress test so everything seems to be running fine is their a reason my coolant lost its color? is there something i should be concerned about?

Coolant- https://www.primochill.com/collections/true-opaque/products/primochill-true-infused-insanely-concentrated-liquid-pre-mix-8oz-opaque-sky-white-sx
Temps- https://gyazo.com/0d59729b85d3eb2b4bb8c0f0c598aae6
Base di water- https://www.primochill.com/collections/base/products/primochill-base-high-purity-deionized-water-128oz-clear

PS: yes i know the bottom fan in the front isnt spinning and yes i know the fan wires are messy i was testing them in different ports and such because one fan is defective and am waiting for a replacement from corsair and i havent gotten around to cleaning it all up yet.

[Enderman]

Use mayhem's coolants instead.

[For Science!]

50 minutes ago, Snyder said:

 

Which radiator are you using?

[Snyder]

51 minutes ago, For Science! said:

Which radiator are you using?

Ek ce 420mm i asked if my cooling loop would be okay in another post in the past and was told it would be 

[Neo-revo]

could be heat related issue

I don't know much about that line of Primochill fluids,

But they did make VUE that  precipitated out causing many a unfortunate person time/effort cleaning out gunk to try and save dying hardware/ combat temps

[Neo-revo]

also could be one of these warnings

[W-L]

4 hours ago, Snyder said:

-SNIP-

Sounds like the particles setted somewhere in the loop probably inside the rads or low flow areas. I'd tear down the loop and clean it out before putting new fluid in in. Personally I'm a bit weary about the Primochill stuff just due to the issues I've seen so I would recommend Mayhems or EKWB but I'll leave that to you if you want to give the primochill stuff another go.