Help soldering USB keyboard

[Ya_Mi]

ii ccant fully explain it .

in fact i type this using on screen keyboard .the only keyboard that i had broke and i am planning to fix it by replacing the USB cable but went full retard and yank the USB cable from the PCB without taking a pictures.

so how can i resolder it back using the new usb cable? i didn't know jack sh*t about electronics but i can solder some stuff.

 

theree are 5 solder points labeled as 

V,G,D-,D+,S

those are in order from the lefft plss heelp

 

[mariushm]

See http://pinouts.ru/Slots/USB_pinout.shtml

 

Link above says which color is each data wire.

edit:eh, if you're lazy...

 

Pin	Name	Cable color	Description
1	VCC	Red	+5 VDC
2	D-	White	Data -
3	D+	Green	Data +
4	GND	Black	Ground

 

V  voltage

G ground

S  shield (the sleeving material around the 4 wires in the cable, if there is any.)

 

[Ya_Mi]

3 minutes ago, mariushm said:

See http://pinouts.ru/Slots/USB_pinout.shtml

 

Link above says which color is each data wire.

edit:eh, if you're lazy...

 

Pin	Name	Cable color	Description
1	VCC	Red	+5 VDC
2	D-	White	Data -
3	D+	Green	Data +
4	GND	Black	Ground

 

V  voltage

G ground

S  shield (the sleeving material around the 4 wires in the cable, if there is any.)

 

i think i got it, thanks buddy