overheating I5 8600K issue with Corsair H55i

[Suchy2904]

So straight to the issue recently I updated my PC with new parts like

-Graphics card - GTX 1060 6Gb

-Motherboard -ASUS TUF Z370-PLUS Gaming
-CPU - Intel I5 8600k
-RAM- Corsair 2x8 Gb 2400MHz
-Case - Corsair Obsidian 750D

I have a problem with my temps, when at first I put everything together it was fine but after some time temps on cpu started to rise up slightly under load for like few degrees but after a week or two temps started to go even higher up 10 or even 20 degrees so I thought maybe I just put too much thermal paste or something so I changed it .Everything get back to normal so I was happy, after another 2 or 3 weeks it happened again even more rapidly ,now I’m after tree thermal pastes and like 10 changes of paste and I decided to ask for help of professionals in this kind of stuff because in my opinion it’s my cooler but I’m scared it could be my cpu . And if it’s actually a cooler then I would like to ask for advice about which one should I buy for replacement. Thank you

[H20Burner]

7 minutes ago, Suchy2904 said:

So straight to the issue recently I updated my PC with new parts like

-Graphics card - GTX 1060 6Gb

-Motherboard -ASUS TUF Z370-PLUS Gaming
-CPU - Intel I5 8600k
-RAM- Corsair 2x8 Gb 2400MHz
-Case - Corsair Obsidian 750D

I have a problem with my temps, when at first I put everything together it was fine but after some time temps on cpu started to rise up slightly under load for like few degrees but after a week or two temps started to go even higher up 10 or even 20 degrees so I thought maybe I just put too much thermal paste or something so I changed it .Everything get back to normal so I was happy, after another 2 or 3 weeks it happened again even more rapidly ,now I’m after tree thermal pastes and like 10 changes of paste and I decided to ask for help of professionals in this kind of stuff because in my opinion it’s my cooler but I’m scared it could be my cpu . And if it’s actually a cooler then I would like to ask for advice about which one should I buy for replacement. Thank you

I think it’s the paste that you are using is bad. Did you try different paste?

[Picklestine]

3 minutes ago, H20Burner said:

I think it’s the paste that you are using is bad. Did you try different paste?

yeah give that a go, maybe also the cooler some how be loosening itself over time are the nut tight when you go to change paste?

[FloRolf]

What exactly are your Temps? 

[Suchy2904]

I used tree different pastes and yes i tight it up even i tried spacing the back plate .  

[Suchy2904]

So that’s the temps rn when I play games it goes to even 95 degrees When just after changing the paste It’s like 31-34 in idle and 55-65 underload sometimes 70