Jump to content

Are my CPU and GPU temperatures bad?

.Draken
By .Draken
in Cooling
 Share
Posted

I'm a bit worried about my component temperatures

 

So my CPU is a Intel Core i5 2400 @ 3.10GHz and it's around 2 years old. The idle temperature is around 65-75°C and the temperature under load reaches 90°C or rarely even higher.

My GPU is 2047MB NVIDIA GeForce GTX 750 Ti and its around 2 years old aswell. The idle temperature is 55°C and under load about 85°C.

 

If the temperatures are bad, what should I do?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

reapply the thermal paste between their coolers and themselves, clean coolers while they are off as well.

 

None of these parts are two years old btw, the 2400 is more than 6 years old, and a 750ti is at least 3 years old.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The load temperatares are okay-ish, higher than I'd personally run at but still fine to be ran at.

Those idle temperatures are too high, though.

 

Changing the thermal paste on both, or at the very least the CPU, will probably help.

PC - CPU Ryzen 5 1600 - GPU Power Color Radeon 5700XT- Motherboard Gigabyte GA-AB350 Gaming - RAM 16GB Corsair Vengeance RGB - Storage 525GB Crucial MX300 SSD + 120GB Kingston SSD   PSU Corsair CX750M - Cooling Stock - Case White NZXT S340

 

Peripherals - Mouse Logitech G502 Wireless - Keyboard Logitech G915 TKL -  Headset Razer Kraken Pro V2's - Displays 2x Acer 24" GF246(1080p, 75hz, Freesync) Steering Wheel & Pedals Logitech G29 & Shifter

 

         

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, .Draken said:

I'm a bit worried about my component temperatures

 

So my CPU is a Intel Core i5 2400 @ 3.10GHz and it's around 2 years old. The idle temperature is around 65-75°C and the temperature under load reaches 90°C or rarely even higher.

My GPU is 2047MB NVIDIA GeForce GTX 750 Ti and its around 2 years old aswell. The idle temperature is 55°C and under load about 85°C.

 

If the temperatures are bad, what should I do?

 

Those temperatures seem... OK, but "... ok" has led to some pretty spectacular CPU failures in the past. Then again, we could all be talking about temperatures where the paste is to blame.

Have you already removed the dust from your computer case, fans, heatsink etc?

If that's already done, you might consider removing the old thermal paste from your CPU and applying some new thermal compound.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

re apply paste. it really helps with old stuff. maybye case fans are not working? what fans/case do you have?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 hours ago, Jurrunio said:

reapply the thermal paste between their coolers and themselves, clean coolers while they are off as well.

 

None of these parts are two years old btw, the 2400 is more than 6 years old, and a 750ti is at least 3 years old.

When I bought the PC the parts were new or unused, and ill reaply the thermal paste

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Those are high idle temps. What are your specs and how is your airflow laid out?

Are these idle temps after the system has been running for a while or soon after boot?

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

85 is kinda high for a 750Ti unless it's a mini or low profile design

 

reapply thermal paste on the CPU

ASUS X470-PRO • R7 1700 4GHz • Corsair H110i GT P/P • 2x MSI RX 480 8G • Corsair DP 2x8 @3466 • EVGA 750 G2 • Corsair 730T • Crucial MX500 250GB • WD 4TB

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
17 hours ago, aezakmi said:

85 is kinda high for a 750Ti unless it's a mini or low profile design

 

reapply thermal paste on the CPU

It's a mini.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×