Jump to content

Sodimm ddr3l and dimm adaptor

Cont3mplation
 Share
Go to solution Solved by Jurrunio,
1 minute ago, Cont3mplation said:

Its an old Fujitsu d3041-a11 gs1 board I got from an old work pc someone no longer needed.

then it wont work because the memory controller on socket 775 platform does not support 8GB DDR3, or single rank 4GB DDR3.

Posted

Hi, I recently watched the ltt video on sodimm to dimm adaptors and had a revelation, realising I had 16Gb of ddr3l sodimm memory from an old laptop sat around, and I was working on a ddr3 pc so this was perfect to try. I had 2x8Gb sodimm sticks so to test I got one adaptor from eBay, a generic sodimm to dimm adaptor, and went to try it. Putting one of the 8Gb sticks in it and putting that as the only memory in the system. I tried to power it on but got a loud succession of three beeps (seemingly meaning no ram or something similar) and no post. I tried swapping the socket and also which 8Gb stick I used but to no avail. Confused, I then tried it in a low voltage only optiplex machine, and it works perfectly. 

I believed that the 1.35v ddr3l was also compatible with normal 1.5v sockets but is this not always the case? Any troubleshooting help for this would be much appreciated as would love to upgrade the main machine from 6Gb to 16Gb for that added performance, thanks in advance.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

what motherboard does the ddr3 pc use?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Isn't there a jumper on the DIMM adapter to switch between 1.35v and 1.5v operation?

Desktop: i9 11900k, 32GB DDR4, 4060 Ti 8GB 🙂

 

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, Jurrunio said:

what motherboard does the ddr3 pc use?

Its an old Fujitsu d3041-a11 gs1 board I got from an old work pc someone no longer needed.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, Theguywhobea said:

Isn't there a jumper on the DIMM adapter to switch between 1.35v and 1.5v operation?

Nope, just three or four smd resistors and a socket, that's it

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
1 minute ago, Cont3mplation said:

Its an old Fujitsu d3041-a11 gs1 board I got from an old work pc someone no longer needed.

then it wont work because the memory controller on socket 775 platform does not support 8GB DDR3, or single rank 4GB DDR3.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Jurrunio said:

then it wont work because the memory controller on socket 775 platform does not support 8GB DDR3, or single rank 4GB DDR3.

Ah okay, out of curiosity what do you mean by single rank? Sorry somewhat new to pc building as a whole 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Cont3mplation said:

Ah okay, out of curiosity what do you mean by single rank? Sorry somewhat new to pc building as a whole 

single rank RAM only has memory chips on one side, while dual rank has memory chips on both sides.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Jurrunio said:

single rank RAM only has memory chips on one side, while dual rank has memory chips on both sides.

Ah okay, so out of interest, I've been looking at getting an h110 ddr3 motherboard for a while now as have an old optiplex with an i5-6500 but a terrible power supply, so could that theoretically support the ddr3l ram?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, Cont3mplation said:

Ah okay, so out of interest, I've been looking at getting an h110 ddr3 motherboard for a while now as have an old optiplex with an i5-6500 but a terrible power supply, so could that theoretically support the ddr3l ram?

yes, though you should check the BIOS and lower the memory voltage, if it decides to send more than 1.5v to the RAM.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×