Jump to content

New recently mounted PC problem

Princess Luna
By Princess Luna
in Troubleshooting
 Share
Go to solution Solved by TVwazhere,
4 minutes ago, Princess Cadence said:

So I have just finished putting together my computer however I have had issues...

 

My computer turns on, displays nothing through either iGPU or GPU, stays on for a little bit I think leds blink once, and then it turns off. Since by touching the power cable made it start back up again I thought it could be the issue, bought a new one but same issue apparently.

 

Quite frustrating, what should be the next step here? I should note I did feel there was the need of excessive pressure to make the shitty 212 mount bother me from begin to end... I have ss's and all, could it still be the power cable? it is 10A maybe I need the 15A? I'm really lost here and my brother who usually helps me better at this is in new york :/ 

 

Here are some screenshot's

 

https://imgur.com/a/N3jNe

 

I could really use help

Well first off

 

0ukRyxC.jpg

 

Ram should go in same colored slots (both grey ones i believe)

Posted

So I have just finished putting together my computer however I have had issues...

 

My computer turns on, displays nothing through either iGPU or GPU, stays on for a little bit I think leds blink once, and then it turns off. Since by touching the power cable made it start back up again I thought it could be the issue, bought a new one but same issue apparently.

 

Quite frustrating, what should be the next step here? I should note I did feel there was the need of excessive pressure to make the shitty 212 mount bother me from begin to end... I have ss's and all, could it still be the power cable? it is 10A maybe I need the 15A? I'm really lost here and my brother who usually helps me better at this is in new york :/ 

 

Here are some screenshot's

 

https://imgur.com/a/N3jNe

 

I could really use help

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
https://linustechtips.com/topic/875593-new-recently-mounted-pc-problem/
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
4 minutes ago, Princess Cadence said:

So I have just finished putting together my computer however I have had issues...

 

My computer turns on, displays nothing through either iGPU or GPU, stays on for a little bit I think leds blink once, and then it turns off. Since by touching the power cable made it start back up again I thought it could be the issue, bought a new one but same issue apparently.

 

Quite frustrating, what should be the next step here? I should note I did feel there was the need of excessive pressure to make the shitty 212 mount bother me from begin to end... I have ss's and all, could it still be the power cable? it is 10A maybe I need the 15A? I'm really lost here and my brother who usually helps me better at this is in new york :/ 

 

Here are some screenshot's

 

https://imgur.com/a/N3jNe

 

I could really use help

Well first off

 

0ukRyxC.jpg

 

Ram should go in same colored slots (both grey ones i believe)

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU AMD R7 7800X3D    Motherboard Asrock B650E Taichi Lite    RAM Corsair Vengeance RGB 32GB 5200mhz    GPU ASUS RTX4080 STRIX 

Case Fractal Torrent   Storage Samsung 980Pro 2TB, Crucial P3 Plus 4TB x2,     PSU Corsair RM1000x    Cooling Deepcool AK620

Link to post
Share on other sites
Posted
  • Author
Just now, TVwazhere said:

Ram should go in same colored slots (both grey ones i believe)

Will change it right away

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to post
Share on other sites
Posted

got to say, not a fan of the 212 mount really. got one for my brother and it was a pain to install.

 

check CPU fan cable

put RAM in same colors, says which ones in the manual

check all cables

reseat CPU

check for damage on the motherboard

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to post
Share on other sites
Posted
  • Author

@TVwazhere@Bananasplit_00

System up and running, last 3 builds I made were actually cheap h110 micro atx's with only 2 dimms it really didn't cross my mind, put them on the right ones and voilá.

 

I will do the full log soon ^^

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to post
Share on other sites
Posted
14 hours ago, Princess Cadence said:

@TVwazhere@Bananasplit_00

System up and running, last 3 builds I made were actually cheap h110 micro atx's with only 2 dimms it really didn't cross my mind, put them on the right ones and voilá.

 

I will do the full log soon ^^

That almost got me on my first build too! Good to hear it was just that :) 

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU AMD R7 7800X3D    Motherboard Asrock B650E Taichi Lite    RAM Corsair Vengeance RGB 32GB 5200mhz    GPU ASUS RTX4080 STRIX 

Case Fractal Torrent   Storage Samsung 980Pro 2TB, Crucial P3 Plus 4TB x2,     PSU Corsair RM1000x    Cooling Deepcool AK620

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×