Posted December 10, 2017 5 minutes ago, Damascus said: Sooomedaaayy, over the rainbow! When I make more than minimum wage I'll probably invest in a caselabs, or mill something comparable for myself. For now I think I'll need to cap myself at $200 No worries and I completely understand. 5 minutes ago, Damascus said: TBH I expected this response, what do you think of using a modified h500p for 400mm in the front and 360 up above? When modifying a case, the sky is the limit, but with that said, you are still limited to the interior volume of the case, unless you were to go really nuts. If you were to do a 360mm up top and a 400 mm up front, I think you might find the width (200mm) to be a bit much to deal with for the entire length of the rad (~450mm). The 200mm fan mounting locations would also definitely have to change as I'm sure that weren't configured for use with a 400mm rad. Then there's the fact that on top of installing a GPU and all of its plumbing, you still need to squeeze a pump in there somewhere. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 Author 8 minutes ago, done12many2 said: When modifying a case, the sky is the limit, but with that said, you are still limited to the interior volume of the case, unless you were to go really nuts. If you were to do a 360mm up top and a 400 mm up front, I think you might find the width (200mm) to be a bit much to deal with for the entire length of the rad (~450mm). The 200mm fan mounting locations would also definitely have to change as I'm sure that weren't configured for use with a 400mm rad. Then there's the fact that on top of installing a GPU and all of its plumbing, you still need to squeeze a pump in there somewhere. Thinking 400mm on the front with 360 up above with the pump either tucked into the basement or part of the tube res. Fun thing, the radiators use the same fan hole locations as the included fans Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 Other: Case-Labs There a new SMA8 going to be released soon. I personally love my case, THW10. Which I consider to be god tier, There is allot of space to fit anything you want inside of it. Most Cases have pedestals if you need even more space. Current Build: Project Frost Gaming Rig Build: Project Ice Dragon Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 Author @Revan654 again the answer is "if I had a grand for cases that's the one I'd get" anything to else to recommend? Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 11 minutes ago, Damascus said: Thinking 400mm on the front with 360 up above with the pump either tucked into the basement or part of the tube res. Fun thing, the radiators use the same fan hole locations as the included fans That's great. I would not have expected the fan holes to line up with a 400mm rad since it's not a common rad size and not technically supported by the case. Good for you bud! Another fun fact. A 400mm radiator is about 85% more surface area than the 360mm rad that you will use up top and 178% more surface area than the 240mm rad that you already have. You will get 71% more overall surface area when using a 360mm + 400mm compared to a 360mm + 240mm. Hope that helps in deciding if the 400mm is worth it over the 240mm. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 Author Just now, done12many2 said: You will get 71% more overall surface area when using a 360mm + 400mm compared to a 360mm + 240mm. Hope that helps in deciding if the 400mm is worth it over the 240mm. Oh, it's absolutely worth it! Especially with the included fans being on par with noctua's offerings it's no competition to a low performance slim 240 Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 Author 3 minutes ago, done12many2 said: That's great. I would not have expected the fan holes to line up with a 400mm rad since it's not a common rad size and not technically supported by the case. Good for you bud! The current rgb fans are based off of an older design from when this stuff was more popular, the phobya rad was built to be compatible with those fans and it transferred over (according to a CM rep) Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 10 minutes ago, Damascus said: @Revan654 again the answer is "if I had a grand for cases that's the one I'd get" anything to else to recommend? Case-Labs do have Bullet cases if you want something Small, There only 200 dollars and you can fit a 280 radiator inside one. InWin 509 looks nice. Current Build: Project Frost Gaming Rig Build: Project Ice Dragon Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 1 minute ago, Damascus said: The current rgb fans are based off of an older design from when this stuff was more popular, the phobya rad was built to be compatible with those fans and it transferred over (according to a CM rep) That's pretty damn awesome. Well, it's looks like you have a case picked. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 10, 2017 Author 8 minutes ago, done12many2 said: That's pretty damn awesome. Well, it's looks like you have a case picked. Yup, this is my current first place (despite 0% votes) the db 700 is what I'll get if I run out of budget btw do you think a monoblock is worth it? Specifically a bitspower block that's actually a CPU block + vrm blocks in a neat looking package Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 11, 2017 3 hours ago, Damascus said: Yup, this is my current first place (despite 0% votes) the db 700 is what I'll get if I run out of budget btw do you think a monoblock is worth it? Specifically a bitspower block that's actually a CPU block + vrm blocks in a neat looking package Bitspower blocks are not that Great, If you want a MonoBlock I suggest looking at EK. Current Build: Project Frost Gaming Rig Build: Project Ice Dragon Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 21, 2017 Author @Bananasplit_00 @For Science! @done12many2 @Revan654 GG fractal, looks like I know what case I'm getting Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 21, 2017 8 hours ago, Damascus said: @Bananasplit_00 @For Science! @done12many2 @Revan654 GG fractal, looks like I know what case I'm getting im legit thinking il sell my Define C for it too.... its so good I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays... nothing, it just sits there collecting dust... Builds: The Toaster Project! Northern Bee! The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0) Spoiler "Here is some advice that might have gotten lost somewhere along the way in your life. #1. Treat others as you would like to be treated. #2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt. #3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place. Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 21, 2017 @Damascus Sweet case for sure. Not sure is it has enough room for storage though. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 21, 2017 Author 9 hours ago, Bananasplit_00 said: im legit thinking il sell my Define C for it too.... its so good It's got E-ATX SUPPORT!!! 4 hours ago, done12many2 said: @Damascus Sweet case for sure. Not sure is it has enough room for storage though. Just invested in 1tb of m.2 nvme storage (Woooo!) so if I need more space I throw some 2.5" ssd's or hdd's on the back Want to custom loop? Ask me more if you are curious Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now