Jump to content

Dual PSU In a build

Billy_Mays

I'm wondering is there any danger of dual PSU in one system? One PSU is from atleast 2003 and the other is from 2011

Im mostly on discord now and you can find me on my profile

 

My Build: Xeon 2630L V, RX 560 2gb, 8gb ddr4 1866, EVGA 450BV 

My Laptop #1: i3-5020U, 8gb of DDR3, Intel HD 5500

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

very dangerous especially with old PSUs, just get a good single PSU. 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, nerdslayer1 said:

very dangerous especially with old PSUs, just get a good single PSU. 

I know but I want to get my rig up and running fast

Im mostly on discord now and you can find me on my profile

 

My Build: Xeon 2630L V, RX 560 2gb, 8gb ddr4 1866, EVGA 450BV 

My Laptop #1: i3-5020U, 8gb of DDR3, Intel HD 5500

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, nerdslayer1 said:

do not risk it

Ok but do you know a good reliable psu with dual 8 pin PCIE connectors that is on the more budget end within $100

Im mostly on discord now and you can find me on my profile

 

My Build: Xeon 2630L V, RX 560 2gb, 8gb ddr4 1866, EVGA 450BV 

My Laptop #1: i3-5020U, 8gb of DDR3, Intel HD 5500

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Billy_Mays said:

Ok but do you know a good reliable psu with dual 8 pin PCIE connectors that is on the more budget end within $100

@Energycore 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Billy_Mays said:

I'm wondering is there any danger of dual PSU in one system? One PSU is from atleast 2003 and the other is from 2011

@nerdslayer1 is correct. Using dual PSUs is not as simple as simply jumping one of them. They have to both turn on at the exact same time, because of the way inductors in a system accumulate current, so you need some kind of control board for the PSUs, so that a single switch turns both units on at the same time, which is not worth it over just buying a new PSU.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, wzrd said:

@nerdslayer1 is correct. Using dual PSUs is not as simple as simply jumping one of them. They have to both turn on at the exact same time, because of the way inductors in a system accumulate current, so you need some kind of control board for the PSUs, so that a single switch turns both units on at the same time, which is not worth it over just buying a new PSU.

Ok

Im mostly on discord now and you can find me on my profile

 

My Build: Xeon 2630L V, RX 560 2gb, 8gb ddr4 1866, EVGA 450BV 

My Laptop #1: i3-5020U, 8gb of DDR3, Intel HD 5500

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

An application that uses a dual PSU setup requires a set of units that are properly equip to deal with the irregular loads that it is going to be put through. You most likely aren't going to get that in a dated 14 year old power supply.

 

As for what power supply has two 8 pin PEG connector, most quality modern 450w PSU has that. Like the Corsair CX450M for example.

 

What are you powering?

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, quan289 said:

An application that uses a dual PSU setup requires a set of units that are properly equip to deal with the irregular loads that it is going to be put through. You most likely aren't going to get that in a dated 14 year old power supply.

 

As for what power supply has two 8 pin PEG connector, most quality modern 450w PSU has that. Like the Corsair CX450M for example.

I'm going to be powering a GTX 770 and a 2 fans and AMD Phenom ll x4 925 and possibly two HDD's

Im mostly on discord now and you can find me on my profile

 

My Build: Xeon 2630L V, RX 560 2gb, 8gb ddr4 1866, EVGA 450BV 

My Laptop #1: i3-5020U, 8gb of DDR3, Intel HD 5500

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×