orange LED fans

[k0enf0rNL]

hello,

 

i need orange LED fans for my 750D. i need 3 140mm for intake/exhaust and 2 140mm for my kraken x60 and 2 120mm for the bottem.

do i need to put my fans on my kraken x60 in push or pull? and what about the bottom? intake or exhaust.

 

 

[megadarkwood]

http://www.newegg.ca/Case-Fans/SubCategory/ID-573

[Havoc]

hello,

 

i need orange LED fans for my 750D. i need 3 140mm for intake/exhaust and 2 140mm for my kraken x60 and 2 120mm for the bottem.

do i need to put my fans on my kraken x60 in push or pull? and what about the bottom? intake or exhaust.

 

 

Xigmatek Orange Line.... come in 140 and 120.... They are white LED's but blades are orange so gives it orange glow.

 

http://lh3.ggpht.com/_OPPwk2m0VEI/TDbzL5WBzSI/AAAAAAAAAA8/-iTIa1m9dvc/5.jpg

 

Push or pull doesn't matter either way... Linus did a video. I would say push then you can see led's + fans through the window.

[k0enf0rNL]

the xigmatek 140mm doesn't have a lot of air pressure and certainly not a good airflow at only 63.5 cfm. i want an airpressure of atleast 1.7 mmH20. and 85+ cfm for in/outtake

[Lays]

the xigmatek 140mm doesn't have a lot of air pressure and certainly not a good airflow at only 63.5 cfm. i want an airpressure of atleast 1.7 mmH20. and 85+ cfm for in/outtake

 

considering it's orange LED I don't think very many fans are made in that, I don't think you have an opportunity to be picky here lol

[k0enf0rNL]

i've looked around a bit on google and found these: http://www.aerocool.com.tw/fan/shark-fan/560.html

are there any better ones for airflow?

[Lays]

i've looked around a bit on google and found these: http://www.aerocool.com.tw/fan/shark-fan/560.html

are there any better ones for airflow?

 

I had aerocool fans in the past, they're quite loud, I'd stay away from them, it also died in like ~1 month the bearing started leaking oil and it just kicked the bucket

[k0enf0rNL]

what about these for the kraken x60? http://www.bitfenix.com/global/en/products/accessories/spectre-led-pwm#specs

[Brian]

Get some Spectre Pros. Job done.

[k0enf0rNL]

those aren't in orange or orange LED.

[Brian]

those aren't in orange or orange LED.

My bad. Some reason I thought they came in every size in Orange.

[Brian]

You could always try getting a white LED fan and then tint the LEDs slightly with an orange Sharpie.

[k0enf0rNL]

i think white LED fans with orange would be nice. otherwise its all to much orange. i think i will get these then:

for the kraken: http://www.bitfenix.com/global/en/products/accessories/spectre-led-pwm#specs

for the in/outtake: http://www.xigmatek.com/product.php?productid=138&type=specification

[k0enf0rNL]

can i put fans in the bottom when there are 2 HDD cases above it? or do i need to remove them?

[k0enf0rNL]

i searched on youtube and found this comment:

dark-->Red, light-->orange. I dont hear noise when fan is running =)

 

do you own them? and can you give it a color code in the dark? like this #FF0000. this is red. 

at this site you can get the color codes.

http://www.color-hex.com/

[chaozbandit]

Cougar fans are the only ones that come to mind. Translucent orange blades with red LEDs is about as close as you can get. Available in both 140mm and 120mm sizes.

 

http://www.cougar-world.com/products/fans/cfd_red_led_fan.html

[Standardstyle65]

http://www.newegg.ca/Product/ProductList.aspx?Submit=ENE&N=100007997%20600035684&IsNodeId=1&name=Orange <all the orange fans on newegg.