Jump to content

Silent and a good Combo?

Hello Guys!

So I am planning to add a custom water cooling system to my rig (I have one H100i V2) so I picked these parts:

 

Are they good and would it fit together?  I have a 780T without an optical Drive.

EK-FC1080 GTX Strix - Nickel

EK-FC1080 GTX Strix - Nickel

€ 127.82 € 127.82          
EK-FC1080 GTX Strix Backplate - Nickel

EK-FC1080 GTX Strix Backplate - Nickel

€ 41.27 € 41.27  
EK-Ekoolant EVO Blood RED (concentrate 100mL)

EK-Ekoolant EVO Blood RED (concentrate 100mL)

€ 6.84 € 6.84  
EK-Cable Y-Splitter 3-Fan PWM (10cm)

EK-Cable Y-Splitter 3-Fan PWM (10cm)

€ 3.40 € 3.40  
EK-XRES 140 Revo D5 PWM (incl. pump)

EK-XRES 140 Revo D5 PWM (incl. pump)

€ 134.70 € 134.70  
LED 3mm TWIN ULTRA RED

LED 3mm TWIN ULTRA RED

€ 2.89 € 5.78  
EK-CSQ Plug G1/4 (for EK-Badge) - Black

EK-CSQ Plug G1/4 (for EK-Badge) - Black

€ 3.89 € 15.55  
EK-HD Tube 12/16mm 500mm (2 pcs)

EK-HD Tube 12/16mm 500mm (2 pcs)

€ 11.76 € 23.52  
EK-CoolStream XE 360 (Triple)

EK-CoolStream XE 360 (Triple)

€ 108.15 € 108.15  
EK-AF Angled 45° G1/4 Black Nickel

EK-AF Angled 45° G1/4 Black Nickel

€ 5.85 € 5.85  
EK-AF Angled 90° G1/4 Black Nickel

EK-AF Angled 90° G1/4 Black Nickel

€ 6.84 € 13.68  
EK-HDC Fitting 16mm G1/4 - Elox Black

EK-HDC Fitting 16mm G1/4 - Elox Black

€ 5.86 € 46.85  
EK-UNI Pump Bracket (120mm FAN) Vertical

EK-UNI Pump Bracket (120mm FAN) Vertical

€ 10.78 € 10.78  
EK-ATX Bridging Plug (24 pin)

EK-ATX Bridging Plug (24 pin)

€ 1.99 € 1.99  

EK-Supremacy EVO - Nickel (Original CSQ)

EK-Supremacy EVO - Nickel (Original CSQ)

€ 66.84

€ 66.84

Main Rig:

| Asus Maxmimus VIII HERO | 6700k @ 4.8GHz | 16GB Corsair LED @2666MHz | Asus ROG 1070 @ 20xxMHz , 9200MHz | Corsair Hydro H100i v2 | Corsair 780T | Samsung850 EVO 500GB | 1 TB & 2TB Seagate HDD | DVD Drive :ph34r:| PS4 Controller | Superflower LEADEX 750 W 80+G | Noctua & Corsair Fans |

 

Peripherie:

| Corsair K70 LUX | Asus GX1000 | Rode NT USB | PS4 | Sennheiser 185 Headphones | Corsair Void Headset | ASus PG279Q & Sony 4k TV |  Lamp | Mousepad |

Link to comment
Share on other sites

Link to post
Share on other sites

Is it your first time doing hard tubing? If so buy more piping than that, just incase you make more mistakes than you'd like (it probably will happen)
Better to have more and be safe, than not have enough :P

PC - CPU Ryzen 5 1600 - GPU Power Color Radeon 5700XT- Motherboard Gigabyte GA-AB350 Gaming - RAM 16GB Corsair Vengeance RGB - Storage 525GB Crucial MX300 SSD + 120GB Kingston SSD   PSU Corsair CX750M - Cooling Stock - Case White NZXT S340

 

Peripherals - Mouse Logitech G502 Wireless - Keyboard Logitech G915 TKL  Headset Razer Kraken Pro V2's - Displays 2x Acer 24" GF246(1080p, 75hz, Freesync) Steering Wheel & Pedals Logitech G29 & Shifter

 

         

Link to comment
Share on other sites

Link to post
Share on other sites

should be fine :) 

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

It's not only my first time hard line it's my first time custom loop... :D But I think hard line looks sooo much better so I want to give it a try...

 

Main Rig:

| Asus Maxmimus VIII HERO | 6700k @ 4.8GHz | 16GB Corsair LED @2666MHz | Asus ROG 1070 @ 20xxMHz , 9200MHz | Corsair Hydro H100i v2 | Corsair 780T | Samsung850 EVO 500GB | 1 TB & 2TB Seagate HDD | DVD Drive :ph34r:| PS4 Controller | Superflower LEADEX 750 W 80+G | Noctua & Corsair Fans |

 

Peripherie:

| Corsair K70 LUX | Asus GX1000 | Rode NT USB | PS4 | Sennheiser 185 Headphones | Corsair Void Headset | ASus PG279Q & Sony 4k TV |  Lamp | Mousepad |

Link to comment
Share on other sites

Link to post
Share on other sites

It should look like this: (very accurate...) hope you can understand me... I'm not the best drawer... (and not the best in english)

 

Circle should be like: PUMP/Rad/CPU/GPU/PUMP(Reservoir inlet) how much Tubeing would I need?

 

 

case.png

PS: CPU with normal straight fittings

 

Main Rig:

| Asus Maxmimus VIII HERO | 6700k @ 4.8GHz | 16GB Corsair LED @2666MHz | Asus ROG 1070 @ 20xxMHz , 9200MHz | Corsair Hydro H100i v2 | Corsair 780T | Samsung850 EVO 500GB | 1 TB & 2TB Seagate HDD | DVD Drive :ph34r:| PS4 Controller | Superflower LEADEX 750 W 80+G | Noctua & Corsair Fans |

 

Peripherie:

| Corsair K70 LUX | Asus GX1000 | Rode NT USB | PS4 | Sennheiser 185 Headphones | Corsair Void Headset | ASus PG279Q & Sony 4k TV |  Lamp | Mousepad |

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×