Jump to content

PCIe limiting sata ports?

The motherboard I am looking at is the Gigabyte GA-Z170X-UD3 Ultra, I will be using a m.2 sata drive with it which I know limits 2 of the sata ports and 1 sata express port. But I also want to use a usb hub that goes in the PCIe slot, will this also limit more sata slots as well?

Link to comment
Share on other sites

Link to post
Share on other sites

Per the specs:

Quote

1 x PCI Express x16 slot, running at x4 (PCIEX4)
* The PCIEX4 slot shares bandwidth with the SATA3 0/1 connectors. When the PCIEX4 slot is installed with a x4 or above card, the SATA 3 0/1 connectors becomes unavailable.

http://www.gigabyte.com/products/product-page.aspx?pid=5891#sp

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, David P. said:

yes but isnt that just for a PCIe hard drive, because thats for expansion slots?

It's claiming that any occupation of an x4(or above) card disables those ports.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Godlygamer23 said:

It's claiming that any occupation of the slot disables those ports.

Well that sucks. Anyways, thanks!

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, David P. said:

Well that sucks. Anyways, thanks!

I edited my post.

I don't know how it's going to behave with an x1 card installed, but it might be getting routed to the chipset(because x1 is only available in PCIe 2.0 AFAIK), therefore not affecting anything else.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Godlygamer23 said:

I edited my post.

I don't know how it's going to behave with an x1 card installed, but it might be getting routed to the chipset(because x1 is only available in PCIe 2.0 AFAIK), therefore not affecting anything else.

Ah, ok yes the one I want is a x1 card so that should work. Perfect

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, David P. said:

Ah, ok yes the one I want is a x1 card so that should work. Perfect

I found this in the manual of your motherboard.

Spoiler

Capture.JPG

 

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

9 minutes ago, Godlygamer23 said:

I found this in the manual of your motherboard.

  Hide contents

Capture.JPG

 

Ok so according to that, if I have both a m.2 ssd and a pcie usb hub then it should only disable 2 of the sata ports. Thanks! Also do they make sata splitters, so you can plug 2 sata drives into one slot? I have no clue to be honest.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, David P. said:

Ok so according to that, if I have both a m.2 ssd and a pcie usb hub then it should only disable 2 of the sata ports. Thanks! Also do they make sata splitters, so you can plug 2 sata drives into one slot? I have no clue to be honest.

There are no SATA splitters in existence as of right now.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Godlygamer23 said:

There are no SATA splitters in existence as of right now.

Ok. Thanks for the help!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×