Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[ProKoN]

lol. its only because i have re installed it about 6 times

 

cl9 @2400 is very nice

 

its too warm +3c here. 

 

also any ideas on the max pch voltage for z77 without killing it. i got my 2133mhz almost stable at just under 1.2v it wouldn't boot 2133 with 1.05v

no idea jumpy.

i usually left that at auto but i never had faster than 1600mhz memories back in those days.

 

maybe at @runit3 can help but i see he is using the slowest memory kit \ stick out there or couldnt be bother to jack dem frequencies up lol

[runit3]

If that's the P8Z77V-LX then it is the VRM. It was pretty poor.

Not the VRM. BSOD 124

I attached heatsinks to the VRM's and the 2 I couldn't reach are under my XSPC block...and I'm missing one pin on the socket.

[runit3]

no idea jumpy.

i usually left that at auto but i never had faster than 1600mhz memories back in those days.

 

maybe at @runit3 can help but i see he is using the slowest memory kit \ stick out there or couldnt be bother to jack dem frequencies up lol

It's crap RAM I had lying around from another decommissioned i5 build. Trident X 2400's will be put on order when I find a replacement board for this one.

 

My PCH is @1.2v, I'll throw the dual core back in once I've updated Windows and kill the board. What voltage increments do you want?

[ProKoN]

It's crap RAM I had lying around from another decommissioned i5 build. Trident X 2400's will be put on order when I find a replacement board for this one.

 

My PCH is @1.2v, I'll throw the dual core back in once I've updated Windows and kill the board. What voltage increments do you want?

lets start with maximum and work our way down

[runit3]

lets start with maximum and work our way down

It's manual key-in, don't think there's a hard set max, might be 2.0v. I'll start at a healthy 1.5v and work my way up until a cap explodes off the board into my face

[ProKoN]

It's manual key-in, don't think there's a hard set max, might be 2.0v. I'll start at a healthy 1.5v and work my way up until a cap explodes off the board into my face

i only wish it was the epic

 

to make cap explode please reverse its polarity

 

#linussoldertips

[Dabombinable]

It's manual key-in, don't think there's a hard set max, might be 2.0v. I'll start at a healthy 1.5v and work my way up until a cap explodes off the board into my face

If only I had my P5K posting, maybe this time I'd have it catch fire (it survived near 3 misses-though I had to ghetto the VRM off older motherboards )

[runit3]

@ProKoN well turns out there is a hardcap on the P8Z77, 1.685v. Been running XTU for 15 minutes now and it's still holdin up. Guess I'll just leave it and when I smell burning cardboard it's done

[ProKoN]

@ProKoN well turns out there is a hardcap on the P8Z77, 1.685v. Been running XTU for 15 minutes now and it's still holdin up. Guess I'll just leave it and when I smell burning cardboard it's done

 

I hope your not using a  heatsink and have removed those vrm sinks

 

 

 

 

 

[runit3]

I hope your not using a  heatsink and have removed those vrm sinks

I left them on. Board just wouldn't die. Straight back to ebay with it, along with the Pentium, and that horrible RAM kit.

 

Newegg sold out of the refurb ROG boards. I knew I should've bought one of those damn things 2 days ago.

[ghikft]

here is my submission

[ProKoN]

I was never known to be easy on the equipment. Just another day in the laboratory.

 

forums fastest c2d

 

 

[Dabombinable]

Running Cinema 4D now, and so far on my Pentium III 667MHz things look, shall we say, very rough. And its not the FX5500 (or I hope so).

 

Edit: canceled the tests for now, I need 300MB of RAM so 256MB isn't doing the job.

[Jumper118]

Well here are the results of the socket repair and a proper 2550k. Something is up with the power delivery, or it's just a crap chip. Either way I think I'm going to purge with some cash for a refurb ROG off Newegg unless something magical pops up on Ebay.

2550.JPG

if that is the chip, it must be the worst 2550k in existence or maybe your 1333mhz ram is making the score look really low

 

Holy bombaaaaa 5.2????? wow . about the crash during screen shot that happened to me many times . i think print screen button have some kind of huge script on the back its stable for 2 hours and just hit the button and here comes the blue screen ....

 

FTW i did ....i took this short after that and didn't took screen shot of that :wacko: . i'm a cinebench fanboy now . i need to run it again ..? don't tell me yes . coz i it 87C 3 times during test :blink:

its funny cos i think 5.2ghz is slow. i dont even open the temp monitor after 1.5v, much too scary. i know at 1.5v the hottest core was at 76c on my chip, but that was with one fan on my cooler. and my room at 10/11c. when i did that last run at 1.6v and 5.2ghz i had 3 fans on the cooler and it was 8/9c .  

 

no idea jumpy.

i usually left that at auto but i never had faster than 1600mhz memories back in those days.

 

maybe at @runit3 can help but i see he is using the slowest memory kit \ stick out there or couldnt be bother to jack dem frequencies up lol

i'll do a bit of research into this before tonight and see what i can get it upto. 

[runit3]

if that is the chip, it must be the worst 2550k in existence. 

We'll find out next week when the Sabertooth gets here

[Jumper118]

We'll find out next week when the Sabertooth gets here

under water i think it might just squeeze 5.3ghz. a sabertooth should help. my mpower is actually annoying me, because it has less options to change than my asus P5Q Deluxe in the bios  

[runit3]

under water i think it might just squeeze 5.3ghz. a sabertooth should help. my mpower is actually annoying me, because it has less options to change than my asus P5Q Deluxe in the bios

It was sub 63C @1.44v under load hooked up to my deconstructed temporary donor loop, with only 1 fan running. I have high hopes. The P8 BIOS was a little underwhelming compared to 1150 offerings, I missed my Q-fan.

[Jumper118]

this is the highest score i got a screenshot of. quite an annoying score i have to say. looks like its going to be mild for the next few days 5-8c so i might not be able to beat it for a bit

[thekeemo]

im soo close to moving one up but oh well

 

I had it at 4.9GHz but turned out that it wasnt as stable as I thought

 

heres the build log http://linustechtips.com/main/topic/308231-the-idiot-v20-hp-shit-v21/#entry4188939

[OCing Noob]

this is the highest score i got a screenshot of. quite an annoying score i have to say. looks like its going to be mild for the next few days 5-8c so i might not be able to beat it for a bit

on a Sandy i think this score is not bad at all

[Jumper118]

on a Sandy i think this score is not bad at all

until its over 917cb its not good enough for me. i think 920 would be nice. that way i would be 2nd on the 1155 sheet. 

 

im soo close to moving one up but oh well

 

I had it at 4.9GHz but turned out that it wasnt as stable as I thought

 

heres the build log http://linustechtips.com/main/topic/308231-the-idiot-v20-hp-shit-v21/#entry4188939

dat ram.

[thekeemo]

until its over 917cb its not good enough for me. i think 920 would be nice. that way i would be 2nd on the 1155 sheet. 

 

dat ram.

what about it?

 

it is 1333 but I oc'ed it

[DildorTheDecent]

until its over 917cb its not good enough for me. i think 920 would be nice. that way i would be 2nd on the 1155 sheet. 

 

dat ram.

You're RAM needs to go faster jumps

[Jumper118]

what about it?

 

it is 1333 but I oc'ed it

yeah its slow Z97 chips are great for high speed ram. obviously it won't effect performance in games, but for benchmarks i would want something a bit faster.  

You're RAM needs to go faster jumps

all the ram is too slow! i want the ram that topog was using with my 2600k, 2200mhz cl7-10-7

[thekeemo]

yeah its slow Z97 chips are great for high speed ram. obviously it won't effect performance in games, but for benchmarks i would want something a bit faster.  

all the ram is too slow! i want the ram that topog was using with my 2600k, 2200mhz cl7-10-7

 

http://img.photobucket.com/albums/v133/scoobytopdog/916_zps78c8c16c.jpg~original

give/send me ram/money then