Posted July 6, 2016 11 minutes ago, Dackzy said: So much Nvidia and green... Too much nvidia,too much green,too much BRANDING I do love the Actual "open" case mod tough with the gorgeous angles Let's agree to disagree Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 6, 2016 7 minutes ago, MrTiC said: Too much nvidia,too much green,too much BRANDING I do love the Actual "open" case mod tough with the gorgeous angles I could not agree more. Before you buy amp and dac. My thoughts on the M50x Ultimate Ears Reference monitor review I might have a thing for audio... My main Headphones and IEMs: K612 pro, HD 25 and Ultimate Ears Reference Monitor, HD 580 with HD 600 grills DAC and AMP: RME ADI 2 DAC Speakers: Genelec 8040, System Audio SA205 Receiver: Denon AVR-1612 Desktop: R7 1700, GTX 1080 RX 580 8GB and other stuff Laptop: ThinkPad P50: i7 6820HQ, M2000M. ThinkPad T420s: i7 2640M, NVS 4200M Feel free to pm me if you have a question for me or quote me. If you want to hear what I have to say about something just tag me. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 9, 2016 Author On 06/07/2016 at 10:26 PM, bdub109 said: I can't wait!! Looks great. By the way do you do your own vinyl work? I would really like to have some done if you could suggest a source. If you do your own what equipment so you use and do you have more information on it? Cheers man! Yea, I do all my own vinyl work. I'm using a Silhouette Cameo 2 vinyl plotter, very easy to use and it works great. If you're just wanting to cut something quick then there should be a lot of places that do it around shopping centres. Usually in places where they print on t-shirts and stuff like that. For a once off buying a vinyl cutter would not be worth it On 07/07/2016 at 0:48 AM, Dackzy said: So much Nvidia and green... On 07/07/2016 at 1:02 AM, MrTiC said: Too much nvidia,too much green,too much BRANDING I do love the Actual "open" case mod tough with the gorgeous angles On 07/07/2016 at 1:08 AM, Dackzy said: I could not agree more. I think I mentioned it quite a few times throughout the build log and in the videos. This build is for an NVIDIA event, their Pascal Launch Party in Australia plus it will be going to 4 more events on top of that therefore it is a show build. When you do a show build fully sponsored, branding is a must to show appreciation and in the end it is used for advertising at said events. I do a lot of other builds for the same purposes The NVIDIA Pascal launch party was actually this past Thursday in Melbourne, Australia where they announced the GTX 1060. They build was on display there and it did very well. I'll have final pics of the completed build once it gets back next week SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 9, 2016 sub a dub dub CPU: Intel Core i7 8700k CPU Cooler: Corsair Hydro Series H100i Mobo: Memory: G.Skill Ripjaws X 32GB 2133 Storage #1: 1TB 850 EVO SSD Storage #2: Western Digital Black 2TB Storage #3: Western Digital Green 4TB GPU: Gigabyte 980 Ti G1 Case: Mastercase5 PSU: EVGA 750 W G2 80+Gold Keyboard: Corsair K70 RGB Cherry MX Brown Mouse: Razer Deathadder Elite Monitor: LG 34UM94 Headset: Bose Phone: Samsung Galaxy S9 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 9, 2016 Author 10 minutes ago, paps511 said: sub a dub dub Thanks mate SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 9, 2016 Author Hi guys, Sorry for not updating the build log for a few days, I've been away on a little trip and then got busy with work As some of you may be aware, the NVIDIA Pascal Launch Party took place in Melbourne this past Thursday July 7th where they showcased a whole lot of GTX 1080s and 1070 from different vendors as well as HTC Vive demos of the awesome NVIDIA VR Funhouse and of course the worlds first exclusive look at the new GTX 1060. I was very fortunate to have been flown to this event and get to experience it all and no doubt the PROJECT ALPHA OMEGA build was there too! I worked hard on getting it ready in time for the event and unfortunately didn't have time to film any more videos or photos as I was building into it. The build did very well and got quite a lot of attention which was a good way to showcase the GTX 1080 graphics cards inside it. The open frame design of the case helped showcase the hardware even more. Here are some teaser photos of the build at the event as well as some other photos throughout the NVIDIA Party. Sorry for the poor quality, they were all taken on my phone I'll also leave you with some hardware pr0n photos Thanks for checking it out guys! Stay tuned for final pics, more videos of the completed build and after, more watercooling Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 9, 2016 13 hours ago, ciobanulx said: Cheers man! Yea, I do all my own vinyl work. I'm using a Silhouette Cameo 2 vinyl plotter, very easy to use and it works great. If you're just wanting to cut something quick then there should be a lot of places that do it around shopping centres. Usually in places where they print on t-shirts and stuff like that. For a once off buying a vinyl cutter would not be worth it I think I mentioned it quite a few times throughout the build log and in the videos. This build is for an NVIDIA event, their Pascal Launch Party in Australia plus it will be going to 4 more events on top of that therefore it is a show build. When you do a show build fully sponsored, branding is a must to show appreciation and in the end it is used for advertising at said events. I do a lot of other builds for the same purposes The NVIDIA Pascal launch party was actually this past Thursday in Melbourne, Australia where they announced the GTX 1060. They build was on display there and it did very well. I'll have final pics of the completed build once it gets back next week Ah i might have missed that part, if its for an event its ok (tought it was a personal build hehe) The actual casemod is really nice Let's agree to disagree Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 11, 2016 Author On 10/07/2016 at 1:42 AM, MrTiC said: Ah i might have missed that part, if its for an event its ok (tought it was a personal build hehe) The actual casemod is really nice Thanks mate, all good SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 12, 2016 Author Hi guys, I have some good and bad news unfortunately. The good news is, the build has just come back this morning from Melbourne and the bad news is that it is slightly damaged. It seems like the bottom of the box took at little hit. There's a bit of a dent at the bottom however it can easily be put back with some hand force. I'm guessing from the shock as well that the acrylic on the front panel was shaken a bit and it ended up going into the fans scratching the green painted rings. I'll be spending a couple of days this week on it before I bring you the final photos However, for now I'll leave you with this quick video I took of the Bitspower waterblocks for the ASUS ROG GTX 1080 Strix graphics cards that I have in this build atm which will eventually go on the two cards A few things I forgot to mention in the video. The waterblock comes with no backplate as it is fully compatible with the original backplate on the card meaning you can still use the RGB features on the original backplate. That combined with the RGB feature in the waterblock and should be a pretty nice looking set up Also, I'm thinking with an extender as well as a splitter cable between two waterblocks, it should be able to be connected to an RGB controller on the new ASUS motherboards for more easy control. Hope you guys enjoy this small update. Stay tuned for more. Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 17, 2016 Author Hi guys, Good news! The build is back in one piece and fortunately none of the components were damaged! Some quick phone snaps before the final photoshoot! Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 17, 2016 oh damn that fluid is sexy. Before you buy amp and dac. My thoughts on the M50x Ultimate Ears Reference monitor review I might have a thing for audio... My main Headphones and IEMs: K612 pro, HD 25 and Ultimate Ears Reference Monitor, HD 580 with HD 600 grills DAC and AMP: RME ADI 2 DAC Speakers: Genelec 8040, System Audio SA205 Receiver: Denon AVR-1612 Desktop: R7 1700, GTX 1080 RX 580 8GB and other stuff Laptop: ThinkPad P50: i7 6820HQ, M2000M. ThinkPad T420s: i7 2640M, NVS 4200M Feel free to pm me if you have a question for me or quote me. If you want to hear what I have to say about something just tag me. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 18, 2016 Author 19 hours ago, Dackzy said: oh damn that fluid is sexy. Cheers SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 28, 2016 Author Hi guys, Sorry for the late post, I've been super busy with work and some upcoming events! Here are the final pics for the build! Hope you guys like it and stay tuned as I'll have some videos and more content for this build! Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 31, 2016 You don't get to see an open case on the forums everyday, and I don't think I've ever seen one as nice as this. Do you mind me asking what fluid you're using?? Keep up the awesome work! Higher frame rate over higher resolution. CPU-i5 4690k -GPU-MSI 970 sli -Mobo-MSI g45 gaming -Memory-16gb crucial ballistix -PSU- EVGA 80+ gold g2 850w -Case- corsair 200r Monitors- Acer XB240H, Asus ROG Swift, Dell P2815Q 2160p -Keyboard- Corsair k70 RGB -Mouse- Corsair M65 -Mouse Pad- Glorious Extended Pad -Headphone- BeyerDynamic DT990 250ohm, Senheiser HD 518, Fiio E10k Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 31, 2016 Author 5 hours ago, ConnorDahne said: You don't get to see an open case on the forums everyday, and I don't think I've ever seen one as nice as this. Do you mind me asking what fluid you're using?? Keep up the awesome work! Thanks a lot mate, much appreciated! Coolant used in Mayhems Aurora II Silver SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 31, 2016 Author Hi guys, The build plus a few of my others were on display at an NVIDIA NFAN event yesterday hosted at the flagship Microsoft Store in Sydney! Will have photos and a video from the event soon however here's some quick snaps of how I transported the builds there hehe Some of you may not have seen the gold one before. I will have a build log for this one up soon, it will be a post build log as the build has been finished for a few months now. I just didn't have time to do a build log at the time due to being in the process of moving to another city and adjusting Anyways, stay tuned for more on Project Alpha Omega! Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted August 1, 2016 Author Hi guys, Here are the photos from the NVIDIA NFAN event held at the flagship Microsoft Store in Sydney! I'll have the video from the event up next, just need to edit it Thanks for checking it out! Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted August 7, 2016 Author Hi guys, I have the highlight video from the NVIDIA NFAN event last weekend with the build plus some of my others on display! Enjoy Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted August 19, 2016 Author Hi guys, I've put together a showcase video for the build with some gameplay. Set-up in the video: MONITOR - ASUS ROG Swift PG348Q Monitor KEYBOARD - Corsair STRAFE RGB Mechanical Gaming Keyboard MOUSE - Corsair M65 PRO RGB FPS Gaming Mouse MOUSE MAT - ASUS ROG Sheath Desk HEADSET - Corsair VOID RGB Wireless Dolby 7.1 Gaming Headset Hope you guys enjoy it Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 30, 2016 Author Hey guys, My Project Alpha Omega build is still kicking and it was recently displayed at PAX Australia on the ASUS booth! Check out the pics as well as a video from PAX! PAX AU video - Thanks for checking it out! Cheers, Alex SIMPLE MODZ VAULT BOY - A Fallout inspired build (Featured Build - December 2014) - GREEN MOLECULE - TOXIC CHROME - PARVUM FORMULA Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now