Jump to content

Won't boot - No CPU fan

★ Coups ★
 Share
Go to solution Solved by ★ Coups ★,
6 minutes ago, Enderman said:

there should be a setting in your UEFI to change "minimum rpm" to "ignore" so that it doesnt give you any warnings when the fan is at 0rpm

 

10 minutes ago, bgibbz said:

Yes. I haven't used that bios, but look in advance settings and find he setting that allows it to boot without a CPU fan. If you look back at linuses 7 gamers 1 CPU video, he experienced the same problem on an Asus motherboard so you might be able to catch where the setting is located in bios. 

 

2 minutes ago, ★ Coups ★ said:

I had gone into advanced and to monitoring and put the monitoring to ignore.  Is that the trick? If not, how do I actually get to UEFI? 

 

Alright.  I turned off monitoring and it's booting into Windows now.  Is there anything I should look out for with this kind of setup? 

 

Thanks guys

Posted

Basically I've put my watercooling radiator fans onto the motherboards System fan connections so that I can turn them off when they are no needed... 

 

Problem is that it won't boot into the operating system now as it thinks that no CPU fan is installed. Is there a way of bypassing this? 

 

I'm pretty positive that the pump is on too, so it's all safe. 

BIOS ver 2601

 

 

Thanks for the help! 

 

 

1466194236009668449059.jpg

1466194263426-2014718767.jpg

CPU - i7-4790k | CPU Cooler - NZXT Kraken X53 | Motherboard -  Asus Gyphon Z97 Armour Edition | RAM - Corsair Vengeance (2x8GB) 2400Mhz | Graphics Card - MSI GTX 1070 | Power Supply - Corsair CS750M | Storage - Seagate 1TB HDD | Samsung 500GB 850 Evo | Case - Fractal Design ARC Mini R2 | Colour Theme - Generic Red & Black

 

Operating System - Windows 10 Pro | Peripherals - Corsair RGB Mechanical K70 Keyboard/Corsair M65 Mouse

Click here to give a damn

 

 

 

 

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/
Share on other sites
Link to post
Share on other sites
Posted
12 minutes ago, ★ Coups ★ said:

Basically I've put my watercooling radiator fans onto the motherboards System fan connections so that I can turn them off when they are no needed... 

 

Problem is that it won't boot into the operating system now as it thinks that no CPU fan is installed. Is there a way of bypassing this? 

 

I'm pretty positive that the pump is on too, so it's all safe. 

BIOS ver 2601

 

 

Thanks for the help! 

 

 

1466194236009668449059.jpg

1466194263426-2014718767.jpg

Yes. I haven't used that bios, but look in advance settings and find he setting that allows it to boot without a CPU fan. If you look back at linuses 7 gamers 1 CPU video, he experienced the same problem on an Asus motherboard so you might be able to catch where the setting is located in bios. 

******If you paste in text into your post, please click the "remove formatting" button for night theme users.******

CPU- Intel 6700k OC to 4.69 Ghz GPU- NVidia Geforce GTX 970 (MSI) RAM- 16gb DDR4 2400 SSD-2x500gb samsung 850 EVO(SATA) Raid 0 HDD- 2tb Seagate Case- H440 Red w/ custom lighting Motherboard - MSI Z170 Gaming A OS- Windows 10 Mouse- Razer Naga Epic Chroma, Final Mouse 2016 turney proKeyboard- Corsair k70 Cherry MX brown

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918856
Share on other sites
Link to post
Share on other sites
Posted

there should be a setting in your UEFI to change "minimum rpm" to "ignore" so that it doesnt give you any warnings when the fan is at 0rpm

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918873
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Enderman said:

there should be a setting in your UEFI to change "minimum rpm" to "ignore" so that it doesnt give you any warnings when the fan is at 0rpm

I had gone into advanced and to monitoring and put the monitoring to ignore.  Is that the trick? If not, how do I actually get to UEFI? 

CPU - i7-4790k | CPU Cooler - NZXT Kraken X53 | Motherboard -  Asus Gyphon Z97 Armour Edition | RAM - Corsair Vengeance (2x8GB) 2400Mhz | Graphics Card - MSI GTX 1070 | Power Supply - Corsair CS750M | Storage - Seagate 1TB HDD | Samsung 500GB 850 Evo | Case - Fractal Design ARC Mini R2 | Colour Theme - Generic Red & Black

 

Operating System - Windows 10 Pro | Peripherals - Corsair RGB Mechanical K70 Keyboard/Corsair M65 Mouse

Click here to give a damn

 

 

 

 

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918884
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, ★ Coups ★ said:

Basically I've put my watercooling radiator fans onto the motherboards System fan connections so that I can turn them off when they are no needed... 

 

Problem is that it won't boot into the operating system now as it thinks that no CPU fan is installed. Is there a way of bypassing this? 

 

I'm pretty positive that the pump is on too, so it's all safe. 

BIOS ver 2601

 

 

Thanks for the help! 

 

 

1466194236009668449059.jpg

1466194263426-2014718767.jpg

Mhh there might be a option, if not then you can set the fan speed to something like 5%, since thats not audible its just fine.

 

On 11/19/2014 at 2:14 PM, Syntaxvgm said:
You would think Ubisoft would support the Bulldozer based architectures more given their digging themed names like bulldozer, Piledriver, Steamroller and Excavator.
Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918891
Share on other sites
Link to post
Share on other sites
Posted
  • Author
  • Solution
6 minutes ago, Enderman said:

there should be a setting in your UEFI to change "minimum rpm" to "ignore" so that it doesnt give you any warnings when the fan is at 0rpm

 

10 minutes ago, bgibbz said:

Yes. I haven't used that bios, but look in advance settings and find he setting that allows it to boot without a CPU fan. If you look back at linuses 7 gamers 1 CPU video, he experienced the same problem on an Asus motherboard so you might be able to catch where the setting is located in bios. 

 

2 minutes ago, ★ Coups ★ said:

I had gone into advanced and to monitoring and put the monitoring to ignore.  Is that the trick? If not, how do I actually get to UEFI? 

 

Alright.  I turned off monitoring and it's booting into Windows now.  Is there anything I should look out for with this kind of setup? 

 

Thanks guys

CPU - i7-4790k | CPU Cooler - NZXT Kraken X53 | Motherboard -  Asus Gyphon Z97 Armour Edition | RAM - Corsair Vengeance (2x8GB) 2400Mhz | Graphics Card - MSI GTX 1070 | Power Supply - Corsair CS750M | Storage - Seagate 1TB HDD | Samsung 500GB 850 Evo | Case - Fractal Design ARC Mini R2 | Colour Theme - Generic Red & Black

 

Operating System - Windows 10 Pro | Peripherals - Corsair RGB Mechanical K70 Keyboard/Corsair M65 Mouse

Click here to give a damn

 

 

 

 

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918894
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, ★ Coups ★ said:

I had gone into advanced and to monitoring and put the monitoring to ignore.  Is that the trick? If not, how do I actually get to UEFI? 

That should fix it. UEFI is what you are using already ;)

\\ QUIET AUDIO WORKSTATION //

5960X 3.7GHz @ 0.983V / ASUS X99-A USB3.1      

32 GB G.Skill Ripjaws 4 & 2667MHz @ 1.2V

AMD R9 Fury X

256GB SM961 + 1TB Samsung 850 Evo  

Cooler Master Silencio 652S (soon Calyos NSG S0 ^^)              

Noctua NH-D15 / 3x NF-S12A                 

Seasonic PRIME Titanium 750W        

Logitech G810 Orion Spectrum / Logitech G900

2x Samsung S24E650BW 16:10  / Adam A7X / Fractal Axe Fx 2 Mark I

Windows 7 Ultimate

 

4K GAMING/EMULATION RIG

Xeon X5670 4.2Ghz (200BCLK) @ ~1.38V / Asus P6X58D Premium

12GB Corsair Vengeance 1600Mhz

Gainward GTX 1080 Golden Sample

Intel 535 Series 240 GB + San Disk SSD Plus 512GB

Corsair Crystal 570X

Noctua NH-S12 

Be Quiet Dark Rock 11 650W

Logitech K830

Xbox One Wireless Controller

Logitech Z623 Speakers/Subwoofer

Windows 10 Pro

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918899
Share on other sites
Link to post
Share on other sites
Posted
29 minutes ago, ★ Coups ★ said:

Basically I've put my watercooling radiator fans onto the motherboards System fan connections so that I can turn them off when they are no needed... 

 

Problem is that it won't boot into the operating system now as it thinks that no CPU fan is installed. Is there a way of bypassing this? 

 

I'm pretty positive that the pump is on too, so it's all safe. 

BIOS ver 2601

 

 

Thanks for the help! 

 

Download coretemp to check your cpu temps. If it is fine then all is working and it is a false warning. I get it sometimes but i have a window and i can see the fan spinning.

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918922
Share on other sites
Link to post
Share on other sites
Posted
34 minutes ago, ★ Coups ★ said:

Problem is that it won't boot into the operating system now as it thinks that no CPU fan is installed. Is there a way of bypassing this?

If you can't turn it off in the BIOS/UEFI, maybe you could plug some other case fan into the CPU header.

You could add an extra case fan and use one of those resistive voltage droppers to make it turn very slowly and quietly, if noise is the concern.

A sieve may not hold water, but it will hold another sieve.

i5-6600, 16Gigs, ITX Corsair 250D, R9 390, 120Gig M.2 boot, 500Gig SATA SSD, no HDD

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918954
Share on other sites
Link to post
Share on other sites
Posted
27 minutes ago, ★ Coups ★ said:

I had gone into advanced and to monitoring and put the monitoring to ignore.  Is that the trick? If not, how do I actually get to UEFI? 

your pic is already the UEFI

thats what UEFI is

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
https://linustechtips.com/topic/612686-wont-boot-no-cpu-fan/#findComment-7918983
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×