GPU is ready has a new task but doesnt start

[Freaky_spider]

So, i have HD7950, its being folding for the last 10 days or so but now its stuck at 'ready' when i look at the expert controls it has a new task but it wont start, it has bin like that for the last 10 hours

 

any help is welcome 

[Xsilent(X)]

did you tried restarting F@H? and so not press left mouse on the task and press fold. if thats not the case try to place F@H on a trusted application if you have a firewall. if that is not the case reboot system.

[Freaky_spider]

did you tried restarting F@H? and so not press left mouse on the task and press fold. if thats not the case try to place F@H on a trusted application if you have a firewall. if that is not the case reboot system.

-restarted = didnt do anything

-did that to

-havent tried that (didnt work either)

-havent rebooted 

 

im going to try those, thanks for the input

[Xsilent(X)]

and did it work again?

[BenDreadful]

is it overclocked in any way?my cards acted like that when I pushed them too far.

 

could you take a screenshot or paste the log for that slot please?

[chaozbandit]

For future reference, you can check the status of the F@H servers to see if they're operational.

 

Like you, I am also folding a Fahcore_16 work unit that uses the 171.67.108.44 IP address. Currently, this server shows the status "full" which means it will not be accepting work units until a later date. If you look through the status page for this specific IP, it will show that the next window to send in your WUs to this IP is sometime tomorrow. So until then, your GPU will not fold but your F@H client will continually attempt to send the WU that you have completed.

 

Just a note, to check the status of various servers:

http://fah-web.stanford.edu/pybeta/serverstat.html

 

You can also click the hyperlink in the client to see the scheduling for that specific IP address.

 

[Whaler_99]

Another option - click on your log tab, and in your case, click on the slots and choose Slot 01 - this will isolate your log to that slot - the logs are usually very helpful. Typically though if at 100% and nothing happening, as @chaozbandit mentioned, your work server may be busy and/or full right now. This server you get the job from is the one you must submit it back to. Just let it rest. 

 

I have seen on my CPU when there have been server issues, it take a day for the submit to go through. Frustrating, but you also don't want to lose all those points.

[Freaky_spider]

*********************** Log Started 2013-09-25T10:26:52Z ***********************

10:26:53:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment

10:26:53:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment

10:26:53:ERROR:WU00:FS00:Exception: Could not get an assignment

10:26:55:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment

10:26:55:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment

10:26:55:ERROR:WU00:FS00:Exception: Could not get an assignment

10:27:54:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment

10:27:55:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment

10:27:55:ERROR:WU00:FS00:Exception: Could not get an assignment

10:28:30:WARNING:Exception: 2:127.0.0.1: Send error: 10053: De software op uw hostcomputer heeft een verbinding verbroken.

10:28:30:WARNING:Exception: 3:127.0.0.1: Send error: 10053: De software op uw hostcomputer heeft een verbinding verbroken.

10:29:32:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment

10:29:32:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment

10:29:32:ERROR:WU00:FS00:Exception: Could not get an assignment

10:32:09:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment

10:32:09:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment

10:32:09:ERROR:WU00:FS00:Exception: Could not get an assignment

10:36:23:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment

10:36:23:WARNING:WU00:FS00:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment

10:36:23:ERROR:WU00:FS00:Exception: Could not get an assignment

 

Violà, here is the GPU log, still hasen't starded, 

 

now it's stuck at "waiting (enter time)" but everytime the time is over a new timer starts...

 

so looks like it wont get an assigment from the server, so waiting is the only solution?

[Whaler_99]

Unfortunately yes. Short of uninstalling AND deleting all data to try and reset your current work server. And then after a re-install, you may still get stuck with that server, no guarantee...

[Freaky_spider]

thanks for the help anyone, ill post an update if tommorow it still hasn't changed...

[chaozbandit]

Just a heads up, 171.67.108.44 is now accepting WUs. Check your client to see if your GPU WU has been sent yet or not. My client just reported mine as sent and is currently downloading a new one. (Or at least it is trying to download a new one.. currently in an endless wait loop cycle)

 

[warmon6]

Currently, the Core 16 Wu Server(s) are empty and F@H knows about it.

 

https://foldingforum.org/viewtopic.php?p=249375#p249375

 

 

And it might be a while still till there more WU's on the server.  

 

 

 

 

Although the current solution is to run the Advance Flag in attempt to get Core 17 WU's and that should keep your gpu's busy.